• ETRI Journal
• /
• v.38 no.3
• /
• pp.551-559
• /
• 2016

In this paper, we propose a hybrid sensor calibration scheme for mobile crowdsensing applications. As the number of newly produced mobile devices containing embedded sensors continues to rise, the potential to use mobile devices as a sensor data source increases. However, because mobile device sensors are generally of a lower performance and cost than dedicated sensors, sensor calibration is crucial. To enable more accurate measurements of natural phenomena through the use of mobile device sensors, we propose a hybrid sensor calibration scheme for such sensors; the scheme makes use of mobile device sensors and existing sensing infrastructure, such as weather stations, to obtain dense data. Simulation results show that the proposed scheme supports low mean square errors. As a practical application of our proposed scheme, we built a temperature map of a city using six mobile phone sensors and six reference sensors. Thanks to the mobility of the sensors and the proposed scheme, our map presents more detailed information than infrastructure-based measurements.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.276-282
• /
• 2018

Objectives: Due to the uncontrolled increase of the mobile health applications and their scarce use by elderly for reason of absence credibility of measurements by lack scientific support, the aim of this study was to evaluate the differences between the biophysical measurements based on standard instrument against a mobile application using controlled experiments with elderly to propose an effective validation model of the developed apps. Methods: The subjects of the study (50 people) were elderly people who wanted to check their weight and cardiac status. For this purpose, two mobile applications were used to measure energy expenditure based on physical activity (Activ) and heart rate (SMCa) during controlled walking at specific speeds. Minute-by-minute measurements were recorded to evaluate the average error and the accuracy of the data acquired through confidence intervals by means of statistical analysis of the data. Results: The experimental results obtained by the Activ/SMCa apps showed a consistent statistical similarity with those obtained by specialized equipment with confidence intervals of 95%. All the subjects were advised and trained on the use of the applications, and the initial registration of data to characterize them served to significantly affect the perceived ease of use. Conclusions: This is the first model to validate a health-app with elderly people allowed to demonstrate the anthropometric and body movement differences of subjects with equal body mass index (BMI) but younger. Future studies should consider not only BMI data but also other variables, such as age and usability perception factors.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.832-834
• /
• 1999

This paper is a study on the real-position measurements of mobile object using n network. 2-D PSD sensor is used to measure th position of moving object with light source. Position Sensitive Detector(PSD) is an useful which can be used to measure the position o incidence light in accuracy and in real-time. T the position of light source of moving target, neural network technique are proposed and applied. Real-time position measurements of the mobile robot with light source is examined to validate the proposed method. It is shown that the proposed technique provides accurate position estimation of the moving object.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.234-240
• /
• 2011

In this paper, the performances of Cram$\acute{e}$r-Rao Lower Bound (CRLB) with Frequency Difference of Arrival (FDOA) measurements for Unmanned Aerial Vehicle (UAV) tracking are investigated. We focus on two cases: the influence on CRLB with FDOA measurements collected by time, and random distribution of Ground Stations (GSs). We derived the performance by gauging the size of CRLB through Complementary Cumulative Distribution Function (CCDF). From the simulation results, broader distribution of GSs and FDOA measurements by longer time bring about better performance.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.63-68
• /
• 2009

The location of mobile terminals in cellular networks is an important problem in the field of information technology with applications in resource allocation, location sensitive browsing, and emergency communications. Finding location estimation techniques that are robust to non-line of light (NLOS) propagation is a key problem in this area. Time of arrival (TOA) and pattern matching (PM) measurements can be made simultaneously by CDMA cellular networks at low cost. The different sources of errors for each measurement type cause TOA and PM measurements to contain independent information about mobile station (MS) locations. This paper combines the information of PM and TOA measurements to calculate a superior location estimate. The proposed location estimator is robust, provides lower error than the estimators based on the individual measurements, and has low implementation costs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.635-641
• /
• 2008

In this paper, we used a laser range finder (LRF) to detect both the static and dynamic obstacles for the safe navigation of a mobile robot. LRF sensor measurements containing the information of obstacle's geometry are first processed to extract the characteristic points of the obstacle in the sensor field of view. Then the dynamic states of the characteristic points are approximated using kinematic model, which are tracked by associating the measurements with Probability Data Association Filter. Finally, the collision avoidance algorithm is developed by using fuzzy decision making algorithm depending on the states of the obstacles tracked by the proposed obstacle tracking algorithm. The performance of the proposed algorithm is evaluated through experiments with the experimental mobile robot.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.601-608
• /
• 2023

Mobile robots are widely used in industries because mobile robots perform tasks in various environments. In order to carry out tasks, determining the precise location of the robot in real-time is important due to the need for path generation and obstacle detection. In particular, when mobile robots autonomously navigate in indoor environments and carry out assigned tasks within pre-determined areas, highly precise positioning performance is required. However, mobile robots frequently experience data missing in wireless communication environments. The robots need to rely on predictive techniques to autonomously determine the mobile robot positions and continue performing mobile robot tasks. In this paper, we propose an extended Kalman filter-based algorithm to enhance the accuracy of mobile robot localization and address the issue of data missing. Trilateration algorithm relies on measurements taken at that moment, resulting in inaccurate localization performance. In contrast, the proposed algorithm uses residual values of predicted measurements in data missing environments, making precise mobile robot position estimation. We conducted simulations in terms of data missing to verify the superior performance of the proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.16-22
• /
• 1995

Electrically-short wire antennas, widely used for mobile communications and EMI measurements, have low rediation efficiency and gain due to the ohmic loss predominant over the radiation power. A very short dipole antenna for wideband EMI measurements has been analyzed using the Method of Moments with the incorporatio of the ohmic loss calculated by the Phenomenological Loss Equivalennce Method(PEM). The calculated results show the rediation gain and efficiency very with the ohmic loss in a wide range of frequencies. Thses results can be effectively used for optimum design of very small antennas and probes for mobile communications and non-disturbing EMI measurements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.146-151
• /
• 2013

With the development of mobile internet, requirements of positioning accuracy for the LBS (Location Based Service) are becoming more and more higher. The LBS is based on the position of each mobile device. So, it requires a proper acquisition of accurate user's indoor position. Thus indoor positioning technology and its accuracy is crucial for various LBS. In general, RSSI (Received Signal Strength Indicator) measurements are used to obtain the position information of mobile unit under WLAN environment. However, indoor positioning error increases as multiple AP's configurations are becoming more complex. To overcome this problem, an enhanced indoor localization method by AP (Access Point) selection criteria adopting DOP (Dilution of Precision) is proposed.