• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.273-279
• /
• 2007

As the number of mobile telephone users increases, technologies fur increasing quality of services between a mobile terminal and the base station transceiver system become more important than ever. The important criteria of quality of service includes minimum interference of base station, the success rate of network access and portability between different mobile companies. Among many factors, the successful rate of network connection between a mobile terminal and the base station is the most important. In this paper, we introduce an analysis system of mobile terminals using RS-232C communication after considering such environments. This application software simulates the communicational signals between and mobile terminals and the base station and shows the results through the graphs. Using this system, the task about testing communication performance of mobile terminals will be easy since it helps to analyze the status of communication.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.95-102
• /
• 2005

The coordination of locomotion and manipulation has been the typical and main issue for a mobile manipulator. This is particularly because the solution for the control parameters is redundant and the accuracies of controlling the each joints are different. This paper presents a motion planning method for which the mobile base locomotion is less precise than the manipulator control. In such a case, it is appropriate to move the mobile base to discrete poses and then to move the manipulator to track a prescribed path of the end effector, while the base is stationary. It uses a variant of the conventional manipulability measure that is developed for the trajectory control of the end effector of the mobile manipulator along an arbitrary path in the three dimensional space. The proposed method was implemented on the simulation and the experiments of a mobile manipulator and showed its effectiveness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.850-857
• /
• 2012

A moving network is the usage model that provides the mobile stations to the communication service via the mobile relay deployed in the high-speed vehicle. The mobile relay periodically performs the signal strength measurement of the neighbor base stations to select the target base station during the handover procedure. The mobile stations experience the service disruption during the measurement of the mobile relay. In this paper, we propose the estimation based scanning method to overcome the service disruption of the mobile stations connected via the mobile relay. In the proposed method, mobile stations subordinated in the mobile relay periodically measure the signal strength of neighbor base stations in order to perform handover. The measured signal strength is used to estimate the signal strength between the mobile relay and the neighbor base station. We performed simulations in order to evaluate the performance of the proposed method in terms of the estimation accuracy and the overhead due to the exchange of channel information. By the simulation result, The estimation error is less than 4dBm when more than 6 mobile stations are used for the estimation. The overhead caused by the proposed method is less than that caused by the direct measurement of the mobile relay when the data rate is more than 8Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.661-673
• /
• 2003

To prevent performance degradation of TCP due to packet losses in the smooth handoff by the route optimization extension of Mobile IP protocol, a buffering of packets at a base station is needed. A buffering of packets at a base station recovers those packets dropped during handoff by forwarding buffered packets at the old base station to the mobile user. But, when the mobile user moves to a congested base station in a new foreign subnetwork, those buffered packets forwarded by the old base station are dropped and TCP transmission performance of a mobile user in the congested base station degrades due to increased congestion by those forwarded burst packets. In this paper, considering the general case that a mobile user moves to a congested base station, we propose a Priority Packet Forwarding to improve TCP performance in mobile networks. In the proposed scheme, without modification to Mobile IP protocol, the old base station marks a buffered packet as a priority packet during handoff. And priority queue at the new congested base station schedules the priority packet firstly. Simulation results show that proposed Priority Packet Forwarding can improve TCP transmission performance more than Implicit Priority Packet Forwarding and RED (Random Early Detection) schemes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.833-841
• /
• 2011

In this paper, we propose uncoordinated dynamic frequency(channel) allocation schemes based on cognitive radio in mobile cellular networks(MCNs). Under the assumptions that mobile base stations are equipped with cognitive radio(CR) function and they construct uncoordinated network, the proposed scheme enables the MCNs by suppression of successive channel switching and management of channel allocation in a dynamic and distributed manner. The proposed scheme is composed of two phase processes. In the first phase, highly orthogonal sequences are generated and assigned to mobile base stations. In the second phase, each mobile base station is allocated a channel according to the pre-assigned orthogonal sequences. Simulation results show that the number of successive spectrum switching is reduced significantly compared with the random switching scheme.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.781-794
• /
• 2023

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1177-1190
• /
• 2009

In this paper, we propose a fuzzy proxy cache scheme for caching web documents in mobile base stations. In this scheme, a mobile cache model is used to facilitate data caching and data replication. Using the proposed cache scheme, the individual proxy in the base station makes cache decisions based solely on its local knowledge of the global cache state so that the entire wireless proxy cache system can be effectively managed without centralized control. To improve the performance of proxy caching, the proposed cache scheme predicts the direction of movement of mobile hosts, and uses various cache methods for neighboring proxy servers according to the fuzzy-logic-based control rules based on the membership degree of the mobile host. The performance of our cache scheme is evaluated analytically in terms of average response delay and average energy cost, and is compared with that of other mobile cache schemes.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.383-389
• /
• 2017

A small dual-polarized base station antenna with a simple isolation patch is presented. A high isolation is achieved when using a shorted metallic isolation patch. The experimental results indicate that the measured impedance bandwidth of the proposed antenna is 1.72 GHz to 1.89 GHz for small cell systems and that the isolation is more than 30 dB. The proposed antenna exhibits good radiation patterns with a peak gain of 8 dBi.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.121-124
• /
• 1999

In a packet-switched wireless cellular network, a packet destined to a mobile station is queued at a base station and then broadcast over the base station's cell. When an active mobile station leaves a cell, there re-main packets which are destined to the mobile and not yet delivered to it at the cell's base station. For application which are sensitive to packet losses, such back- logged packets must be forwarded to the new base station. Otherwise, an end-to-end retransmission may be required. However, an increase in packet delay is incurred by employing the packet forward scheme, since a packet may be forwarded many times before it is delivered to the destined mobile station. For an enhanced quality-of-service level, it is preferred to reduce tile packet delay time. In this paper, we develop an analytical approximation method for deriving mean packet delay times. Using the approximation and simulation methods, we investigate the effect of network parameters on the packet delay time.