• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.65-68
• /
• 2000

In this paper, design parameters are investigated and design procedure is established for PCS mobile station, especially for receiver RF block. And simulation environment to analyze parameters of the receiver RF block to determine whether it satisfies the receiver standard, IS-98C, is calculated. Design parameters are simulated and optimized. With simulated results, PCS mobile station is implemented and tested. Measured results show good agreement with simulation Design procedure can be used to get optimum characteristics for each of receiver block. By using optimum characteristics, mobile station can be designed more efficiently.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.117-123
• /
• 2012

This paper implements mobile Worldwide Interoperability for Microwave Access (WiMAX) receiver using Software Defined Radio (SDR) technology. SDR system is difficult to implement on the mobile handset because of restrictions that are computing power and under space constraints. The implemented receiver processes mobile WiMAX software modem on Open Multimedia Application Platform (OMAP) System on Chip (SoC) and Field Programmable Gate Array (FPGA). OMAP SoC is composed of ARM processor and Digital Signal Processor (DSP). ARM processor supports Single Instruction Multiple Data (SIMD) instruction which could operate on a vector of data with a single instruction and DSP is powerful image and video accelerators. For this reason, we suggest the possibility of SDR technology in the mobile handset. In order to verify the performance of the mobile WiMAX receiver, we measure the software modem runtime respectively. The experimental results show that the proposed receiver is able to do real-time signal processing.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.266-273
• /
• 2007

In this paper presents the WCDMA(Wideband Code Division Multiple Access) system using the rake receiver over multipath fading and wireless mobile communication environments. The interference between the propagation paths in a multipath fading causes a serious degradation in the wireless mobile communication environments. In order to derive the path interference and reduce the fading effect the rake receiver is used. As a result, the WCDMA system using the rake receiver gives a better performance than the convention WCDMA system over a multipath fading and wireless mobile communication environments.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.28-29
• /
• 2004

Optical wireless mobile communications have the potential to provide wide bandwidth and security . We have proposed and designed the 2-dimensional tracking optical receiver systems for optical wireless mobile communication. The receiver system consist of 4${\times}$4 photodiode array can receive optical signal from the transmitter. The room size is 5${\times}$5m$^2$ and the room height is 3m.

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.10-17
• /
• 2006

For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.552-561
• /
• 2016

In OFDM system, frequency-domain sub-carriers of a symbol generally consist of data sub-carriers and scattered pilot sub-carriers and in the receiver, channel is estimated through time-axis interpolating pilot sub-carriers of several OFDM symbols. However, time-axis interpolation fails to keep track of rapid channel variation caused by fast moving receiver. Although symbol by symbol channel estimation without time-axis interpolation enables fast estimation, the performance is severely degraded for a long delay spread channel in a single frequency networks (SFNs) because of insufficient pilot sub-carriers. In this paper, a channel estimation scheme for OFDM receiver in a fast mobile SFN channel is proposed. The proposed scheme is applied to DVB-T receiver to improve the Doppler mobile performance in SFN channel.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.66-75
• /
• 1997

We derive the system design parameters to implement the receiving system for the PCS mobile station to satisfy the J-sTD-018 which is the PCS mobile station(MS) minimum performance. Also we analyze the system performance and intermodulation spurious due to the values of a device cause the system performance degradation, is proposed. The simulation shows the receiver's maximum system noise figure to satisfy the receiver selectivity is approximately 11 dB. While the MS noise figure is 10dB with system margin 1 dB, the minimum selectivity is -71 dB at 1.25MHz frequency offset from the carrier frequency. And the input 3rd order intercept point of the MS class I and the MS class II~V is -9.5 dBm and -14dBm respectively. When the interference power level at the receiver is small, the receiver has better performance as we increase the gain of the LNA. However, when the interference level at the receiver is large, the receiver performance is heavily affected by the spurious as we increase the gain of the LNA. Thus, we proved the effectiveness of the LNA On/Off switching technique as to reduce the effect of the spurious.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2173-2175
• /
• 2004

This paper addresses a telemetering device which uses RF transceivers and a mobile-phone. Locally collected data arc encoded with a BCH error correcting code and transferred to a receiver through a RF module. The receiver-side RF module decodes the transferred data and then repetes them to a mobile-phone. Lastly, the mobile-phone hands over the data through a wireless phone network to a host computer in the internet.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.91-100
• /
• 2004

This paper presents a receiver-driven TCP flow control mechanism, which is adaptive to the wireless condition, for memory constrained mobile receiver. A receiver-driven TCP flow control is, in general, achieved by adjusting the size of advertised window at the receiver. The proposed method constantly measures at the receiver both the available wireless bandwidth and the packet round-trip time. Depending on the measured values, the receiver adjusts appropriately the size of advertised window. Constrained by the adjusted window which reflects the current state of the wireless network, the sender achieves an improved TCP throughput as well as the reduced round-trip packet delay. Its implementation only affects the protocol stack at the receiver and hence neither the sender nor the router are required to be modified. The mechanism has been implemented in real environments. The experimental results show that in CDMA2000 1x networks the TCP throughput of the proposed method has improved about 5 times over the conventional method when the receiver's buffer size is limited to 2896 bytes. Also, with 64Kbytes of buffer site, the packet round-trip time of the proposed method has been reduced in half, compared the case with the conventional method.