• 제목/요약/키워드: Mobile Giving

검색결과 79건 처리시간 0.02초

자동차 내부 센서간의 통신 및 네트워킹을 위한 다중 반송파 DS-CDMA의 성능 분석 (Performance Analysis of Multicarrier DS-CDMA for Vehicular Sensor Communications and Networking)

  • 박태윤;최재호
    • 한국컴퓨터산업학회논문지
    • /
    • 제5권7호
    • /
    • pp.761-770
    • /
    • 2004
  • 다중 반송파 기반의 DS/CDMA 다중 접속 및 데이터 전송 기법은 여러 종류의 모바일 통신과 무선 통신 분야에 적용 가능한 것으로 알려지고 있다. 특히, 다양한 센서를 탑재한 차세대 지능형 자동차에서 이들 무선 센서 간의 통신 및 네트워킹을 수행함에 있어서 MC-DS/CDMA 기술은 가장 먼저 고려 될 수 있는 기법중의 하나이다. 본 논문에서는 자동차 내부의 센서간의 통신 및 네트워킹을 위해서 부심벌 단위로 순환 접두부를 삽입하는 새로운 방식의 MC-DS/CDMA 기법을 제안하고 우리가 제안한 기법의 간섭 잡음 제한 성능을 주파수 밴드 사용 효율, 코드화 이득 및 동시 접속 센서의 개수 등의 파라미터를 대상으로 비교 평가하였다. 차량의내부는 일반적인 모바일 통신 환경에 비하여 채널 지연 확산이 매우 작은 경우이므로 본 논문에서 제안한 기법은 다수의 무선 센서가 동시에 작동하는 지능형 차량의 센서 간의 통신과 네트워킹에 효과적인 적용이 가능할 것으로 사료된다.

  • PDF

듀얼밴드 휴대폰 응용을 위한 Chip 안테나 설계 및 제작 (Design of Fabrication of a Chip Antenna for DualB and Mobile Phone Application)

  • 고영혁
    • 한국정보통신학회논문지
    • /
    • 제9권7호
    • /
    • pp.1541-1547
    • /
    • 2005
  • 본 논문에서는 GSM/DSC 단말기용 듀얼대역 내장형 안테나를 제안하였다. 안테나는 $38mm{\times}90mm{\times}1mm$의 이동 단말기 PCB 크기와 $30mm{\times}8mm{\times}3.2mm$의 폴더형 패치 크기를 갖는다. 이 안테나 특성은 듀얼대역 설계로 2개의 동작 주파수 909MHz, 1762MHz의 동조가 용이하다. 동작주파수 909MHz, 1762MHz에 대하여 측정된 방사패턴 E면과 H면은 비교 분석되었다. GSM/DSC 단말기용으로 설계 제작한 듀얼대역 내장형 안테나는 모든 대역에서 0dBi에서 2.0dBi사이의 이득을 갖는다. 또한, 휴대폰 케이스를 고려한 인체머리에 미치는 전기력선의 분포와 지향성을 분석하였다. 분석된 모델은 실제 휴대폰과 같은 크기의 그라운드판을 부착시켜 인체의 머리를 고려한 안테나를 구성했다.

내장형 마이크로스트립 듀얼밴드 안테나 (Internal Microstrip DualBand Antenna)

  • 박성일;고영혁;이현진;임영석
    • 대한전자공학회논문지TC
    • /
    • 제42권4호
    • /
    • pp.29-36
    • /
    • 2005
  • 내장형 단말기 안테나, 기지국 안테나, WLAN 안테나, Bluetooth 안테나 등에 이용되는 평면 안테나의 새로운 구조 설계는 최근 특히 2000년 이후에 많이 보고되고 있다. 본 논문에서는 GSM/DSC 단말기용 듀얼대역 내장형 안테나를 제안하였다. 안테나는 38mm$\times$90mm$\times$1mm의 이동 단말기 PCB 크기와 30mm$\times$8mm$\times$3.2mm의 폴더형 패치 크기를 갖는다. 이 안테나 특성은 듀얼대역 설계에서 2개의 동작 주파수 909MHz, 1762MHz의 동조가 용이하다. 동작주파수 909MHz, 1762MHz에 대하여 측정된 방사패턴 E면과 H면을 비교 분석하였다. GSM/DSC 단말기용 설계 제작한 듀얼대역 내장형 안테나는 모든 대역에서 0dBi에서 2.0dBi사이의 이득을 갖는다.

차량 데이터 기반 빅데이터 처리 및 모니터링 시스템 (Big Data Processing and Monitoring System based on Vehicle Data)

  • 신동윤;김주호;이승해;신동진;오재곤;김정준
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권3호
    • /
    • pp.105-114
    • /
    • 2019
  • 4차 산업혁명의 발전에 따라 빅데이터의 기술들을 이용하여 연식이 오래된 차량들에서 확인할 수 없는 결과들을 모바일을 이용하여 즉각적으로 확인할 수 있는 시스템을 개발하였다. 먼저 OBD2 센서를 이용하여 차량의 데이터를 수집하였고 수집된 데이터를 라즈베리파이에 저장하여 라즈베리파이가 차량이 주행하는 것과 같은 상황을 두었다. 이후 차량의 데이터가 발생되면 데이터를 실시간으로 수집하고, 수집된 데이터를 여러 개의 노드를 이용해 분산저장한 뒤 시각화 하고자 하는 데이터를 가공, 정제, 처리하고 처리된 결과를 바탕으로 시각화하여 출력한다. 우리는 이와 같은 진행에 빅데이터를 이용하고 차량데이터를 빠르게 처리하여 모바일 기기를 통하여 효과적으로 확인할 수 있다.

Polypyrrole-Coated Woven Fabric as a Flexible Surface-Heating Element

  • Lee, Jun-Young;Park, Dong-Won;Lim, Jeong-Ok
    • Macromolecular Research
    • /
    • 제11권6호
    • /
    • pp.481-487
    • /
    • 2003
  • Polypyrrole (PPy) was coated sequentially by chemical and electrochemical methods on a woven fabric, giving rise to a fabric having high electrical conductivity. We investigated the effects of the preparation conditions on the various properties of the resulting fabric. The PPy-coated fabric with optimum properties was obtained when it was prepared sequentially by chemical polymerization at the elevated temperature of 100$^{\circ}C$ under a pressure of 0.9 kgf/$\textrm{cm}^2$ and then electrochemical polymerization with a 3.06 mA/$\textrm{cm}^2$ current density at 25 $^{\circ}C$ for 2 hrs with the separator plate. The surface resistivity of the resulting fabric was as low as 5 Ω/$\square$ .The PPy-coated fabric prepared under the optimum conditions showed practically applicable heat generating property. When electrical power was supplied to the fabric using a commercial battery for a mobile phone (3.6 V, LGLl-AHM), the temperature of the fabric increased very quickly from room temperature to ca. 55 $^{\circ}C$ within 2 min and was maintained for ca. 80 min at that temperature. The heat generating property of the fabric was extremely stable, exhibiting similar behavior over 10 repeated cycles. Therefore, we suggest that the PPy-coated fabric in this study may be practically useful for many applications, including flexible, portable surface-heating elements for medical or other applications.

DroidSecure: 안드로이드 어플리케이션 권한 상승 완화를 위한 기술에 대한 연구 (DroidSecure: A Technique to Mitigate Privilege Escalation in Android Application)

  • 응웬부렁;정수환
    • 정보보호학회논문지
    • /
    • 제26권1호
    • /
    • pp.169-176
    • /
    • 2016
  • 안드로이드 플랫폼은 사용자 친화적으로 설계되어 있다. 하지만 이러한 친화적 설계는 취약점이 쉽게 발생할 수 있고, 일반적인 사용자는 쉽게 탐지가 어렵다는 단점을 가지고 있다. 따라서, 본 논문에서는 안드로이드 어플리케이션 분석을 위한 유명한 오픈 소스 분석 도구를 설명하고, 현재 구글의 권한 그룹에 대한 정책의 위험성을 설명한 후 공격자의 권한 상승에 대한 위험을 완화하기 위한 기법을 제안한다. 또한, 21,064의 악성코드 샘플을 조사하여 제안한 기술이 안전하지 않은 응용 프로그램 업데이트 탐지에 대한 증명을 하였을 뿐 아니라 보안 위협에 대한 인식을 고취시키고자 하였다.

Aero-Sim: An NS-2 Based simulator for Aeronautical Ad Hoc Networks

  • Luo, Qin;Wang, Junfeng;Wang, Xiaoqing;Wu, Ke
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권7호
    • /
    • pp.2548-2567
    • /
    • 2015
  • Recently, there has been a clear trend towards the application of ad hoc networking technology in civil aviation communication systems, giving birth to a new research field, namely, aeronautical ad hoc networks (AANETs). An AANET is a special type of ad hoc wireless network with a significantly larger scale and distinct characteristics of its mobile nodes. Thus, there is an urgent need to develop a simulator to facilitate the research in these networks. In this paper, we present a network simulator, Aero-Sim, for AANETs. Aero-Sim, which is based on the freely distributed NS-2 simulator, enables detailed packet-level simulations of protocols at the MAC, link, network, transport, and application layers by composing simulations with existing modules and protocols in NS-2. Moreover, Aero-Sim supports three-dimensional network deployment. Through several case studies using realistic China domestic air traffic, we show that the proposed simulator can be used to simulate AANETs and can reproduce the real world with high fidelity.

박형 도광판의 고속사출성형을 위한 수지 점도 측정 및 수치해석 (Measurement of Viscosity and Numerical Analysis of High Speed Injection Molding for Thin-Walled LGP)

  • 정태성;김종선;하석재;조명우
    • 소성∙가공
    • /
    • 제23권1호
    • /
    • pp.41-48
    • /
    • 2014
  • The light guide plate has become the major component for the backlight module in general information technology products (e.g. mobile phones, monitors, etc.). High speed injection molding has been adopted for thin walled LGP giving advantages such as weight, shape, size, and reduction in production costs. In the current study, the rheological characteristics of high liquidity plastic resin PC(HL8000) were measured using a capillary rheometer to improve the reliability of the numerical analysis for high speed injection molding. With the measured viscosity and PVT of PC(HL8000), numerical analysis of injection molding was conducted using the simulation software(Moldflow). Filling time and deflection were predicted and compared with those of traditional PC resins(H3000, H4000). The results show that PC(HL8000) has significantly different rheological characteristics during high speed injection molding. Hence proper properties of the resin should be used to improve the accuracy of numerical predictions.

SER Analysis of QAM with Space Diversity in Rayleigh Fading Channels

  • Kim, Chang-Joo;Kim, Young-Su;Jeong, Goo-Young;Mun, Jae-Kyung;Lee, Hyuck-Jae
    • ETRI Journal
    • /
    • 제17권4호
    • /
    • pp.25-35
    • /
    • 1996
  • This paper derives the symbol error probability for quadrature amplitude modulation(QAM) with L-fold space diversity in Rayleigh fading channels. Two combining techniques, maximal ratio combining(MRC) and selection combining(SC), are considered. The formula for MRC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an additive white Gaussian noise(AWGN) channel over a chi-square distribution with 2L degrees of freedom. The obtained formula overcomes the limitations of the earlier work, which has been limited only to deriving the symbol error rate(SER) of QAM with two branch MRC space diversity. The formula for SC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an AWGN channel over the distribution of the maximum signal-to noise ratio among all of the diversity channels for SC space diversity has been reported yet. Analytical results show that the probability of error decreases with the order of diversity gain per additional branch decreases as the number of branches becomes larger. On the other hand, the performance of 16 QAM with MRC becomes much better than that of SC as the number of branches becomes larger. By giving the order of diversity, L, and the number of signal points, M, we have been able to obtain the SER performance of QAM with general space diversity. These results can be used to determine the order of diversity to achieve the desired SER in land mobile communication system employing QAM modulation.

  • PDF

행동기반 제어방식을 위한 득점과 학습을 통한 행동선택기법 (Action Selection by Voting with Loaming Capability for a Behavior-based Control Approach)

  • 정석민;오상록;윤도영;유범재;정정주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.163-168
    • /
    • 2002
  • The voting algorithm for action selection performs self-improvement by Reinforcement learning algorithm in the dynamic environment. The proposed voting algorithm improves the navigation of the robot by adapting the eligibility of the behaviors and determining the Command Set Generator (CGS). The Navigator that using a proposed voting algorithm corresponds to the CGS for giving the weight values and taking the reward values. It is necessary to decide which Command Set control the mobile robot at given time and to select among the candidate actions. The Command Set was learnt online by means as Q-learning. Action Selector compares Q-values of Navigator with Heterogeneous behaviors. Finally, real-world experimentation was carried out. Results show the good performance for the selection on command set as well as the convergence of Q-value.

  • PDF