• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.66.1-66.1
• /
• 2018

최근 자동차 배기가스 규제 및 전기자동차, 무인항공기 개발 등의 경량 소재에 대한 필요성이 지속적으로 증가하고 있다. 마그네슘 및 마그네슘 합금은 구조용 금속 소재 중 가장 밀도가 낮은 금속으로서 자동차, 항공, 기계 부품류 및 주방용품이나 전자제품 케이스류 등 다양한 산업분야에서 활용성이 크게 증가하고 있다. 하지만 마그네슘 합금은 화학적 반응성이 매우 크고 표면에 존재하는 피막의 치밀성과 화학적 안정성이 낮아서 쉽게 부식되는 단점이 있다. 따라서 내식성 향상을 위한 표면처리 기술 개발에 대한 필요성이 증대되고 있다. 양극 산화법은 금속표면에 양극 전류를 인가하여 산화피막을 인위적으로 형성시켜줌으로써 내식성을 향상시켜 주는 방법으로서 산업적으로 널리 사용되고 있는 표면처리 방법 중의 하나이다. 본 연구에서는 주석산나트륨의 농도에 따른 AZ31 마그네슘 합금의 양극 산화 피막 형성 거동을 연구하였다. DC 전류를 인가하여 양극산화 피막을 형성하였으며, 피막형성 전압 및 형성된 피막의 두께, 표면 거칠기 및 피막의 구조 등을 분석하여 주석산나트륨 농도에 따른 양극산화 피막의 형성 특성에 대하여 자세하게 고찰하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.29.1-29.1
• /
• 2018

양극산화 표면처리 방법의 일종인 플라즈마 전해산화(PEO, Plasma electrolytic oxidation)는 금속 소재에 양극 전압을 인가하여 고경도의 산화 피막을 금속 표면에 형성시키는 표면처리 기술이다. PEO 공정은 피막의 국부적 유전체 파괴에 의한 아크의 발생을 동반하며, 형성된 산화 피막이 아크 발생에 의한 높은 열에 의해 결정화 되어 일반적인 양극산화 피막보다 우수한 경도와 내마모성을 가진다. 하지만 PEO 공정은 고전압을 필요로 하여 일반적인 양극산화 처리보다 소모되는 전력량이 많으며, 아크 발생에 의해 형성된 피막의 표면 거칠기가 높기 때문에 활용 분야가 제한되거나 후속 연마 공정을 필요로 하는 단점이 존재한다. 본 연구에서는 전류 파형이 알루미늄 합금의 플라즈마 전해산화 피막의 형성 거동에 미치는 영향을 직류 및 펄스전류를 사용하여 연구하였다. NaOH 및 $Na_2SiO_3$가 혼합된 전해액에서 직류 전류 밀도, 전압, 펄스폭을 달리하여 알루미늄 합금에 전류를 인가할 때 발생되는 아크의 거동, 형성된 산화 피막의 두께, 거칠기, 경도, 표면 및 단면 구조를 비교 분석하였다.

• ETRI Journal
• /
• 제31권6호
• /
• pp.680-687
• /
• 2009

This paper reports on an improved piezoelectric microspeaker with a high sound pressure level of 90 dB, a total harmonic distortion of less than 15%, and coherence higher than 0.9. The fabricated Pb(Zr,Ti)$O_3$ (PZT) microspeakers have a thickness of only 1 mm including the speaker frame and an active area of 18 mm${\times}$20 mm. To achieve higher sound pressure and lower distortion, the PZT piezoelectric microspeaker has a well-designed speaker frame and a piezoelectric diaphragm consisting of a tilted PZT membrane and silicone buffer layer. From the simulation and measurement results, we confirmed that the silicon buffer layer can lower the first resonant frequency, which enhances the microspeaker's sound pressure at a low frequency range and can also reduce useless distortion generated by the harmonics. The fabricated PZT piezoelectric microspeakers are implemented on a multichannel speaker array system for personal acoustical space generation. The output sound pressure at a 30 cm distance away from the center of the speaker line array is 15 dB higher than the sound pressure at the neighboring region 30 degrees from the vertical axis.

• Journal of Forest and Environmental Science
• /
• 제25권3호
• /
• pp.187-194
• /
• 2009

This study was carried out to investigate vegetation structure and soil property of natural habitat of Polygonatum stenophyllum to provide basic information for propagation, conservation and restoration. Habitats of Polygonatum stenophyllum were classified into Hemiptelea davidii-Robinia pseudo-acacia dominant population (Yeongwol-eup), Pinus densiflora-Hemiptelea davidii-Callicarpa japonica dominant population (Nam-myeon), and Hemiptelea davidii-Rubus crataegifolius dominant population (Gangchon-ri). The soil pH 6.49~7.28; and electron conductivity 0.10~0.19 ds/m. The average content of organic matter, total nitrogen, available $P_2O_5$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 8.24~16.45 g/kg, 0.02~0.13%, 45.67~123.67 mg/kg, 4.61~6.71 cmol(+)/kg, 0.17~0.63 cmol(+)/kg, 0.06~0.27 cmol(+)/kg and 0.03~0.30 cmol(+)/kg, respectively. Species diversity index (H'), maximum species diversity index (H' max), evenness (J') and dominance (1-J') of investigated sites ranged 1.0323 (Nam-myeon)~1.1134 (Yeongwol -eup), 1.4914 (Gangchon-ri)~1.6128 (Nam-myeon), 0.6401 (Nam-myeon)~0.7270 (Yeongwol-eup) and 0.2730 (Yeongwol-eup)~0.3599 (Nam-myeon) respectively.

• The Korean Journal of Ceramics
• /
• 제1권4호
• /
• pp.191-196
• /
• 1995

Using sol-gel processing method, thin films of lathanum modified lead titanate(PLT) on Corning 7059 glass were prepared. A differential thermal analysis (DTA/TG) curve of gel powder and infrared spectra (FT-IR) of the films were measured to estimate residual organices in them. The heat-treated films were characterized by X-ray diffraction(XRD). Microstructures of the films were observed by a scanning electron microscope (SEM). Optical properties of the films were determined by a UV-VIS spectrophotometer. The waveguiding properties and optical attenuation were measured with the end coupling method and the cut back method. Effects of the drying conditions on the transmittance and the propagation loss of the films were investigated. Experimemtal results showed that the content of residual organics in the film decreased as the drying temperature of the film increased. As the La content of the film increased, the grain size decreased and the transmittance increased. The transmittances of the films increased with the increasing of the drying temperature. The propagation losses in the film decreased as the drying temperature increased.

• 한국실내디자인학회논문집
• /
• 제18권3호
• /
• pp.102-113
• /
• 2009

The SARS virus began to appear and spread in North America and Southeast Asia in the early 2000' s, infecting and harming many people. In the process of examining the causes for the virus, studies on the airborne SARS virus and the way it spread were carried out mainly in the medical field. In the field of architecture, studies were done on the diffusion of air pollutants in buildings using gases such as $CO_2$, $N_2O$, or $SF_6$, but research on virus diffusion was limited. There were also explanations of only the diffusion process without accurate information and discussion on virus characteristics. The aim of this study is to analyze the physical characteristics of airborne virus, consider the possibility of using coupled analysis model and tracer gas for analyzing virus diffusion in building space and, based on reports of how the infection spread in a hospital where SARS patients were discovered, analyze infection risk using tracer gas density and also diffusion patterns according to the location, shape, and volume of supply diffusers and exhaust grilles. This paper can provide standards and logical principles for evaluating various alternatives for making decisions on vertical or horizontal ward placement, air supply and exhaust installation and air volumes in medium or high story medical facilities.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.275-280
• /
• 2008

The effects of the surfactant type, i.e., CTAB(cationic), SDS(anionic), and GA(polymeric), on the stability of 0.1 vol.% $Al_2O_3$ nanofluids were investigated. The changes in size and zeta potential of nanoparticles in nanofluids with pH, surfactant concentration, and time were experimentally observed. The nanofluids adding CTAB, which ionizes of the same charge with the bare particle surface, was found to have the best stability regardless of the surfactant concentration, whereas those with SDS became unstable under low surfactant concentration conditions, i.e. lower than the critical micellel concentration(CMC), before the charge reversal occurred. With higher SDS concentration over CMC, they became stable. Gum Arabic, which had been used often to stabilize the nanofluids, was also tested. In result, it was found that the type and concentration of surfactants to add should be selected considering pH and the sign of the bare particle surface charge.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.85-99
• /
• 1981

This study was to evaluate the cytotoxic effect of three root canal disinfectants (formocresol, camphorated phenol and eugenol) and ten root canal sealers(Cavitec, Hypo-cal, Vitapex, AH26, Canals, Mynol, $N_2$, $N_2$-Medical, Z. O. E. and Calvital) in vitro. The experiments were performed in four differrent modes. In the first and second experiment, the "long-distance" cytotoxicity of three root canal disinfectants were tested on L cells. In the third exeriment, ten root canal sealers were tested for cytotoxicity by means of the tissue culture-agar overlay method immediately, 4 and 24 hours after the experiment. In the fourth experiment, the study with radioactively labeled L cells were employed to determine the relative cytotoxicity of ten root canal sealers. The results were as follows; 1. Every vapors from disinfectants showed more or less cytotoxicity. Of the three disinfectats, formocresol appeared to be the highest cytotoxic effect and camphorated phenol was the lowest. 2. Root canal sealers tested in tbis study showed cytotoxicity at every stage of time intervals. 3. The highest cytotoxic effect was freshly mixed $N_2$ meaical and $N_2$ also revealed the highest cytotoxic effect after 4 or 24 hours among these materials. Vitapex was found the lowest cytotoxic effect at all experimental stage. 4. Root canal sealers except N2 and Mynol showed cytotoxic effect were decreased cytotoxicity according to the time elapsed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.379-381
• /
• 1994

Volume holograms recorded in photorefractive materials can find important applications in optical memories and optical computing systems. One problem with a photorefractive hologram is that it gets erased by the readout light. Nondestructive readout can be achieved by hologram fixing, and several fixing methods have been reported. Fixing is accomplished by thermally activated motion of an unknown ionic defect, which neutralizes the electronic space-charge patterns. At room temperature the ionic patterns are stabilized. When the electrons are partially redistributed by light, a net space-charge pattern appears, and tile fixed hologram can be read out. In this paper, theoretical modeling and some experimental results are presented for thermal fixing of volume phase holograms in photorefractive $LiNbO_3$:Fe. Thermal fixing can be done during or after recording and depends on fixing temperature ($100{\sim}200^{\circ}C$ range) and grating length. Fixed Slating can be erased completely at the temperature over $300^{\circ}C$. Theoretical modeling shows weil the compensation of electronic Slating by ionic grating and is in good agreement with experimental results. In experiments the dependence of thermal fixing on temperatures and grating lengths is investigated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.185-185
• /
• 2000

플라즈마 연구 및 응용에서 플라즈마를 구성하는 이온에 대한 정보를 얻는 것은 중요하다. 특히 플라즈마 진단, 박막 증착, 플라즈마 코팅, 플라즈마 이온주입 등과 같은 플라즈마 프로세싱에서 이온들의 종류 구성비율 및 분포는 매우 중요하다. 질량분석기는 대개 큰 규모로 복잡하고 값비싼 경향이 있다. 플라즈마 교란을 최소화하면서 충분한 질량분해능을 갖고 국소적으로 이온들을 분석할 수 있는 간단하고 작은 규모의 값싼 질량분석기가 필요하다. 본 연구에서는 플라즈마 내에 존재하는 이온을 분석하기 위하여 간단하고 작은 규모의 값싼 프라즈마 이온 질량분석기를 설계, 제작하였다. 이온 질량분석기는 ion extraction part, double focusing sector magnet, ion collector로 구성되어 있다. 플라즈마에 잠기는 ion extraction part의 외부 전극에 Al2O3를 코팅하여 플라즈마 교란을 최소화하였다. 이온들의 공간적 분포를 측정하기 쉽게 하기 위하여 ion extraction part를 이동하여도 질량여과기를 통과한 후에 접속되는 초점의 위치가 Faraday ion collector 에 고정되도록 ion optical system을 설계하였다. Extracting electrode에 의하여 가속된 이온들이 sector magnet에 들어갈 때 평행이 되게 하기 위하여 여러 개의 미세구조를 갖는 Mo grids를 사용하고 immersion lens를 넣어서 이온 광학 시스템을 구성하였다. extraction electrode와 sector magnet 사이에 보조 electrode를 하나 더 넣어서 extracting electrode와 보조 electrode 사이에 immersion lens를 만들었다. 질량여과기로는 permanent magnet sector와 time-varying electrical field를 결합하여 사용하였다. Extracting electrode에 1kV 정도의 전압을 인가하여 이온들을 가속시키고 sector magnet에 톱니파 형태의 전압을 인가하여 mass spectrum을 얻었다. 이온 질량분석기를 플라즈마 장치에 적용하여 질량분해능 등의 특성을 연구하였다. Hot cathode discharge와 inductively coupled RF discharge에서 발생된 질소 플라즈마를 구성하는 이온들의 종류와 그 구성비율을 연구하였다.