• 제목/요약/키워드: MoN

검색결과 1,631건 처리시간 0.038초

TiN코팅 공정 개선에 의한 1Cr-1Mo-0.25V 강재의 피로강도 특성 (Fatigue Strength Characteristics of 1Cr-1Mo-0.25V Steel by Improved TiN Coated Processes)

  • 서창민;김경렬
    • 한국해양공학회지
    • /
    • 제11권4호
    • /
    • pp.49-60
    • /
    • 1997
  • This paper deals with the effect of coating layer on the fatigue strength of TiN coated 1Cr-1Mo-0.25V steel prepared by using the arc ion plating (AIP) process, in which it was characterized by the presence of extractor grid (ion filter). The rotary bending fatigue tests were carried out under room air conditions, and the fatigue crack initiation and growth bwhavior were observed by using plastic replica method. As experimental results, it was found that the obvious improvement of fatigue life at lower stress region was confirmed in TiN coated specimen processed with ion filter. It was also exlained that the increase of fatigue life in the case of an improved AIP process with ion filter was attributed to the retardation of crack initiation of the substrate surface due to hard coating layer, more densly formed with the reduced size and density of droplets.

  • PDF

브릴루앙 산란실험을 이용한 단결정 PbMoO_4$의 탄성계수 측정 (Measurement of elastic constants of single crystal PbMoO_4$ by using brillouin scattering experiment)

  • 박주일;이석목;유윤식;김성철
    • 한국광학회지
    • /
    • 제7권4호
    • /
    • pp.363-369
    • /
    • 1996
  • 정방정계의 단결정인 PbMo $O_{4}$의 탄성늑성을 조사하기 위하여 브릴루앙 산란 실험을 수행하였으며 모든 탄성계수 뿐만 아니라 복굴절 값도 결정할 수 있었다. 그 결과 c$_{11}$=111.4.+-.4.4, c$_{12}$=64.7.+-.3.4, c$_{4+}$=27.0.+-.0.8, c$_{13}$=51.9.+-.2.5, c$_{33}$=95.5.+-.1.9, c$_{66}$=34.5.+-.4.6 그리고 c$_{16}$=15.8.+-.1.2(*$10^{9}$N/m$^{2}$)이었으며 n$_{o}$ -n$_{e}$=0.151.+-.0.018 이었다.다.

  • PDF

Synthesis, Characterization, and Catalytic Properties of Gp 6 Metal Complexes of 1-N,N-dimethylaminomethyl-$1^{\prime}$,2-bis(diphenylphosphino)ferrocene (FcNPP). X-ray Crystal Structure of W$(CO)_4({\eta}^2-FcNPP(O)-P,N)$

  • Kim, Tae-Jeong;Kim, Yong-Hoon;Kim, Eun-Jin;Oh, Sang-Ho;Kim, Hong-Seok;Jeong, Jong-Hwa
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권5호
    • /
    • pp.379-386
    • /
    • 1994
  • Reactions of 1',2-bis(diphenylphosphino)-l-(N,N-dimethylaminomethyl)ferrocene (FcNPP) with $M(CO)_6$ (M=Cr, Mo, W) in the presence of TMNO (Trimethylamine oxide) in a stoichiometric ratio of 1 : 1.5 : 3.5 produced a series of Gp 6 metal carbonyl derivatives with a variety of coordination modes: M(CO)$_4({\eta}^2$-FcNPP-P,P) (M=Cr, Mo, W), $M(CO)_5({\eta}^1-FcNPP-P) (M=Mo, W)\;,\; M_2(CO)_9({\eta}^1\;,\;{\eta}^2-FcNPP-P,P,N) (M=Cr, Mo)\;,\;M_2(CO)_{10}({\eta}^1\;,\;{\eta}^1-FcNPP-P,P) (M=Cr, Mo, W)\;, and\;W(CO)_4({\eta}^2-FcNPP(O)-P,N)$. All these complexes were characterized by microanalytical and spectroscopic techniques. In one case, the structure of W(CO)$_4({\eta}^2$-FcNPP(O)-P,N) was determined by X-ray crystallography. Crystals are monocinic, space group P$2_{1/C}$, with a=10.147(2), b=19.902(3), c=19.821(4) ${\AA},\;{\beta}=96.88(2)^{\circ},\;V=3974(l){\AA}^3$, Z=4, and $D_{calc}=1.64 g cm^{-3}$. The geometry around the central tungsten metal is a distorted octahedron, with the nitrogen and phosphorus atoms being cis to each other. Some of these complexes exhibited catalytic activities in the allylic oxidation and epoxidation of cholesterly acetate. Other oxidation products were also formed with the different chemical yields and product distribution depending upon the ligand and the central metal.

평면형리간드가 배위된 trans-백금(Ⅱ) 착물의 항암활성에 관한 이론적 연구 (제2보) (Theoretical Study on Antitumor Activity of trans-Platinum(Ⅱ) Complexes with Planar Ligands (Ⅱ))

  • 송영대;김정성;박병각
    • 대한화학회지
    • /
    • 제41권6호
    • /
    • pp.277-283
    • /
    • 1997
  • 질소를 포함한 평면형리간드가 배위된 백금(II)착물([$Pt(L)_2X_2$]; L=isoxazole(isox), 3,5-dimethylisoxazole(3,5-diMeisox), 3-methyl,5-phenylisoxazole(3-Me,5-Phisox), and 4-amino-3,5-dimethylisoxazole(4-ADI); X=Cl, Br)의 항암활성을 분자역학(MM2)법으로 최소에너지를 갖는 구조를 구한 후 확장분자궤도함수(Extended Huckel Molecular Orbital)법으로 조사하였다. X 원자의 알짜전하 값은 cis-, trans-이성체 모두 평면리간드의 N 원자보다 음의 값으로 크게 나타나서, N 원자보다 X 원자의 이탈이 용이함을 알 수가 있었고, ${\sigma}MO$에너지 준위로 비교한 결과도 $Pt(d_{x2-y2})-X(P_x)$${\sigma}MO$에너지 준위$(E{\sigma}_{(Pt-X)})$$Pt(d_{x2-y2})-N(P_x)$${\sigma}MO$에너지 준위$(E{\sigma}_{(Pt-N)})$보다 예외없이 높아서 Pt-N보다 Pt-X의 결합이 약함을 알 수 있었다. 또한 X 원자의 cis-, trans-이성체에서의 이탈 용이성을 비교하기 위하여 중심금속과 리간드사이의 ${\sigma}MO$에너지준위로 비교한 결과, trans-이성체에서 $Pt(d_{x2-y2})-N(P_x)$${\sigma}MO$에너지준위$(E{\sigma}_{(Pt-X)})$가 cis-이성체에서 보다 예외없이 높아서 결합이 약함을 알 수 있었다. 아울러 같은 착물에서 cis-보다 trans-착물에서 Pt-X의 결합이 약함을 알 수 있었다, 따라서 $X^-$이온으로 떨어져 나가는 용이성과 그 구조변화가 항암활성과 관계가 있을 것으로 생각하였다. 즉, $E{\sigma}_{(P-N)}-E{\sigma}_{(P1-X)}$가 클수록 저해활성 계수 logIA값이 크게 나타나서 실험적 사실과 일치함을 알 수 있었다.

  • PDF

$NdFe_{10.7}TiB_{0.3}N_x$$NdFe_{10.7}TiMo_{0.3}N_x$의 자기특성 (Magnetic Properties of $NdFe_{10.7}TiB_{0.3}N_x$ and $NdFe_{10.7}TiMo_{0.3}N_x$)

  • 김윤배;김희태;김창석;김택기
    • 한국자기학회지
    • /
    • 제2권3호
    • /
    • pp.239-243
    • /
    • 1992
  • $ThMN_{12}$ 구조를 갖는 $NdFe_{11}TiN_x$ 형 화합물에서 B 이 자화 및 큐리온도의 상승에 매우 효과적임이 밝혀졌다. $NdFe_{10.7}TiB_{0.3}N_x$ 의 자화 및 큐리온도는 $NdFe_{10.7}Ti_{1.3}N_x$ 의 경우에 비하여 각각 20 $Am^2$/kg (20 emu/g) 및 $90^{\circ}C$가 높은 148 $Am^2$/kg (148 emu/g) 및 $560^{\circ}C$를 나타내었다. 한편, Mo은 이방성자장의 증가에 효과적이며, 또한, 질화처리시 ${\alpha}-Fe$의 생성 억제에 효과적인 것으로 추측된다. $NdFe_{10.7}TiMo_{0.3}N_x$ 의 이방성자장은 약 7960 kA/m (100 kOe) 로 $NdFe_{10.7}Ti_{1.3}N_x$ 의 경우에 비하여 약 1590 kA/m (20 kOe) 가 증가한 결과를 보였다.

  • PDF

FORMATION OF IRON SULFIDE BY PLASMA-NITRIDING USING SUBSIDIARY CATHODE

  • Hong, Sung-Pill;Urao, Ryoichi;Takeuchi, Manabu;Kojima, Yoshitaka
    • 한국표면공학회지
    • /
    • 제29권6호
    • /
    • pp.615-620
    • /
    • 1996
  • Chromium-Molybdenum steel was plasma-nitrided at 823 K for 10.8 ks in an atmosphere of 30% $N_2$-70% $H_2$ gas under 665 Pa without and with a subsidiary cathode of $MoS_2$ to compare ion-nitriding and plasma-sulfnitriding using subsidiary cathode. When the steel was ion-nitrided without $MoS_2$, iron nitride layer of 4$\mu\textrm{m}$ and nitrogen diffusion layer of 400mm were formed on the steel. A compound layer of 15$\mu\textrm{m}$ and nitrogen diffusion layer of 400$\mu\textrm{m}$ were formed on the surface of the steel plasma-sulfnitrided with subsidiary cathode of $MoS_2$. The compound layer consisted of FeS containing Mo and iron nitrides. The nitrides of $\varepsilon$-$Fe_2$, $_3N$ and $\gamma$-$Fe_4N$ formed under the FeS. The thicker compound layer was formed by plasma-sulfnitriding than ion-nitriding. In plasma-sulfnitriding, the surface hardness was about 730 Hv. The surface hardness of the steel plasma-sulfnitrided with $MoS_2$ was lower than that of ion-nitrided without $MoS_2$. This may be due to the soft FeS layer formed on the surface of the plasma-sulfnitrided steel.

  • PDF

다층중간재를 사용한 질화규소/스테인레스 강 접합체의 잔류응력 해석 및 기계적 특성 (FEM Residual Stress Analysis and Mechanical Properties of Silicon Nitride/Stainless Steel Joint with Multi-Interlayer)

  • 박상환;김태우;최영화
    • 한국세라믹학회지
    • /
    • 제33권2호
    • /
    • pp.127-134
    • /
    • 1996
  • The thermal residual stresses were estimated for brazed Si3N4/S.S.316 joints with Cu/Mo multi-interlayers using FEM, and their bending strengths at room temperature were measured for various interlayer configura-tions. The Cu, Mo multi-interlayer decreased the maximum residual stress in Si3N4 and caused the residual stress redistribution rsulting in the high residual stress at Mo interlayer. The stress distribution in the joints as well as the maximum residual stress in silicon nitride were found to be main factors for determining bending strengths and Weibull modulous of the joints. The bending strength of the brazed Si3N4/S.S.316 joints with specific Cu, Mo multi-interlayer system were found to be above 400 MPa.

  • PDF

3%Cr-Mo-V강의 2단 가스질화처리를 통한 표면경화 및 내마모성 연구 (A Study on Wear Resistance and Surface Hardening of 3%Cr-Mo-V Steel by Two-step Gas Nitriding)

  • 정길봉
    • 열처리공학회지
    • /
    • 제22권6호
    • /
    • pp.361-367
    • /
    • 2009
  • The two-step gas nitriding was adopted to increase the depth of surface hardening in 3%Cr-Mo-V steel. The two-step gas nitriding consisted of Step I; $520^{\circ}C{\times}20\;hrs$ and Step II; $550^{\circ}{\times}70\;hrs$. The layer of two-step gas nitriding showed better uniformity and deeper nitriding layer than one-step gas-nitriding layer. The maximum surface hardness showed the value of 850 Hv. The maximum depth of nitrogen permeation showed $750\;{\mu}m$ (350 Hv). X-ray diffraction analysis showed that compound layer was mainly consisted of CrN and $\varepsilon-Fe_3N$ phases. These phases were presumed contributing to surface hardening and wear resistance. However, the corrosion resistance of gas-nitrided Cr-Mo-V steel were not improved in the solution of 1 N HCl and NaOH. Therefore, it is necessary that the continuous study for improvement of corrosion resistance hereafter.

Over 8% efficient nanocrystal-derived Cu2ZnSnSe4 solar cells with molybdenum nitride barrier films in back contact structure

  • Pham, Hong Nhung;Jang, Yoon Hee;Park, Bo-In;Lee, Seung Yong;Lee, Doh-Kwon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.426.2-426.2
    • /
    • 2016
  • Numerous of researches are being conducted to improve the efficiency of $Cu_2ZnSnSe_4$ (CZTSe)-based photovoltaic devices, which is one of the most promising candidates for low cost and environment-friendly solar cells. In this work, we concentrate on the back contact of the devices. A proper thickness of $MoSe_2$ in back contact structure is believed to enhance adhesion and ohmic contact between Mo back contact and absorber layer. Nevertheless, too thick $MoSe_2$ layers that are grown during high-temperature selenization process can impede the current collection, thus resulting in low cell performance. By applying molybdenum nitride as a barrier in back contact structure, we were able to control the thickness of $MoSe_2$ layer, which resulted in lower series resistance and higher fill factor of CZTSe devices. The phase transformation of Mo-N binary system was systematically studied by changing $N_2$ concentration during the sputtering process. With a proper phase of Mo-N fabricated by using an adequate partial pressure of $N_2$, the efficiency of CZTSe solar cells as high as 8.31% was achieved while the average efficiency was improved by about 2% with respect to that of the referent cells where no barrier layer was employed.

  • PDF

단일 타겟을 이용한 반응성 마그네트론 스퍼터링 공정에 의한 나노 복합구조의 MoN-Cu 코팅층 형성 기술 개발

  • 정덕형;이한찬;신승용;문경일
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.237-237
    • /
    • 2010
  • 에너지소비와 엔진 부품의 마모문제를 해결하기 위해, soft-phase를 doping한 hard상의 coating에 대한 실험이 최근 중요한 연구 테마로서 진행 중이다. 특히 MoN-Cu coating은 미국 Argon 연구소의 Erdemer박사 등에 의해, 고온 및 상온 윤활성이 우수한 코팅층으로 보고된 이후 많은 연구가 진행되고 있다. 그러나 기존 연구는 Mo와 Cu의 원소타겟을 이용한 연구가 주력이 되었다. 높은 경도와 저온 고온에서의 낮은 나노 혼합물 코팅 종류는 일반적으로 Mo와 Cu와 같은 원소 합금을 이용한 다수 타겟을 이용한 공정에 의해 진행되어왔다. 이러한 복수의 타겟에 의해 증착 동안에는, 정확한 조성, 큰 크기의 시편들의 균일 증착을 조절하기가 쉽지 않다. 또한, 코팅층에 3번째 성분을 추가하기가 어렵다는 문제점이 있다. 본 연구에서는, 최상의 마찰계수와 표면경도를 보이는 MoN-Cu층을 형성시키기 위하여 합금으로 단일 타겟을 제조하였다. 이를 위한 최적 조성을 결정하기 위하여 Mo, Cu 단일 타겟을 이용한 Unbalanced Magnetron sputtering 법으로 다양한 Cu 함량의 MoN+Cu 합금을 제조하였으며, 이에 대한 경도 및 마찰계수 측정을 통해 최적의 Cu 함량을 결정하였다. 이러한 최적 조성의 Cu 타겟제조를 기계적 합금화와 Spark plasma sintering 기술을 이용하여 제작하였으며, 복수의 합금 타겟과 단일 합금 타겟으로 제조된 코팅층의 물성 비교를 통해 합금 타겟의 우수성 여부를 확인하고자 하였다. 증착된 두 조건의 물성을 비교 단일 타겟은 두가지 타겟으로 증착한 것보다 비슷한 조성에서 경도가 높았으며 경도가 비슷한 조성에서는 마찰계수가 낮았다. 또 입자는 10 at.% Cu 조성에 대해 단일타겟이 50nm 결정립을 갖는 반해 단일타겟은 측정이 불가능할 정도의 미세한 결정립을 가졌다. Erdemir의 연구 결과에 의하면, Cu 함량이 증가함에 따라 columnar 형태의 코팅층구조가 나노 구조로 변한다고 하였는데, 본 연구에서 복수의 원소 타겟에서는 확인이 안되었으며, 단일 합금 타겟에서 완벽한 featurless 형태의 코팅층 구조와 우수한 조도의 박막층을 얻을 수 있었다. 이렇게 제조된 다양한 코팅층에 대한 마찰계수 측정이 진행중이다.

  • PDF