• Title/Summary/Keyword: MoCA

Search Result 419, Processing Time 0.028 seconds

Design of GPS L1-CA/Galileo Dual Mode Receiver (GPS L1-CA/Galileo 겸용 수신기의 설계)

  • Kim, Chan-Mo;Im, Sung-Hyuk;Jee, Gyu-In;Cho, Yong-Beom
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.14 no.1
    • /
    • pp.7-12
    • /
    • 2008
  • A GNSS(Global Navigation Satellite System) using GPS provides us with very useful information concerning the positioning of users in many sectors such as transportation, social services, the justice system and customs services, public works, search and rescue systems and leisure. A GNSS using the Galileo satellite is due to work in 2008 and expected to be used in various fields such as aviation, marine transportation, land surveying, resources development precise agriculture, telemetics, and so on. In this paper, we discuss the implementation and testing of a combined GPS/Galileo receiver which we named KSTAR V1.0. Each tracking module of GPS/Galileo dual mode correlator has the five track arms which consist of Very Early code, Early code, Prompt code, late code, and Very late code. Each of 24 tracking modules can be assigned to GPS and/or Galileo signal by changing mode selection register. The basic correlator integration dump period is set to 1ms for GPS C/A code and fast Galileo signal tracking. The performance of the developed combined GPS/Galileo receiver was tested and evaluated using the IF (Intermediated Frequency)-level GPS/Galileo signal generator.

Chemical Compositions in Rainwater at Hiroshima Prefecture, Japan

  • Kim, Do-Hoon;Takeda, Kazuhiko;Sakugawa, Hiroshi;Lee, Jin-Sik
    • Analytical Science and Technology
    • /
    • v.15 no.4
    • /
    • pp.321-328
    • /
    • 2002
  • From May 1999 to July 2000, concentration of 17 metals (Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sr, V, Zn), 4 ions (${NH_4}^+$, $Cl^-$, ${NO_3}^-$, ${SO_4}^{2-}$) and pH in rainwater were investigated. The volume-weighted mean concentrations (VWM) of ${NO_3}^-$ and ${SO_4}^{2-}$ were 16.0 and $17.0{\mu}mol\;L^{-1}$. The average pH was 4.53, which ranged from 3.83 to 6.06. The characteristic variations of these species were investigated in terms of the source of these species by principal component analysis (PCA) and interelement correlation coefficients. The elements were classified into three categories: anthropogenic source (Cd, Cu, Fe, Ni, Pb, V, Zn, ${NH_4}^+$, ${NO_3}^-$, ${SO_4}^{2-}$ and $H^+$), soil and crust dust (Al, Ba, Ca, Fe, Mn) and sea salts (Mg, Na, $Cl^-$). In addition, we compared the concentrations in rainwater, which were taken on the same day in three sites (Higashi-Hiroshima, an urban-facing area and a mountain-facing area of Mt. Gokurakuji) in order to examine the regional effect against the concentrations in them. At the urban-facing area of Mt. Gokurakuji, the concentrations of chemical compositions were higher than other areas.

Effect of Recycled PET Fiber Reinforced Concrete on Chemical Environment (화학적 환경하에서 재생 PET섬유보강 콘크리트의 성능)

  • Jang, Chang-Il;Lee, Sang-Woo;Choi, Min-Jung;Kim, Joon-Mo;Won, Jong-Pil;Kim, Wan-Young
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.709-712
    • /
    • 2008
  • This study evaluated a mechanical performance of recycled polyethylene terephthalate(PET) fiber reinforced concrete on chemical environment. This study applied to three types of environmental condition including alkaline, salt, $CaCl_2$ in water solution and measured a reduction of mechanical performance of recycled PET fiber reinforced concrete for 30, 60, 90 days under chemical solutions. The mechanical performance of recycled PET fiber reinforced concrete evaluated to carried out a compressive strength test. As the result of test, it was found that the mechanical performance decreased as the exposure time to alkaline environment and indicated a excellence performance under salt, $CaCl_2$ environment conditions.

  • PDF

Statistical Optimization of Medium Components for the Production of Biosurfactant by Bacillus licheniformis K51

  • Joshi Joshi;Sanket Sanket;Yadav Sanjay;Nerurkar Anuradha;Desai Anjana J.
    • Journal of Microbiology and Biotechnology
    • /
    • v.17 no.2
    • /
    • pp.313-319
    • /
    • 2007
  • The nutritional medium requirement for biosurfactant production by Bacillus licheniformis K51 was optimized. The important medium components, identified by the initial screening method of Plackett-Burman, were $H_3PO_4,\;CaCl_2,H_3BO_3$, and Na-EDTA. Box-Behnken response surface methodology was applied to further optimize biosurfactant production. The optimal concentrations for higher production of biosurfactants were (g/l): glucose, $1.1;NaNO_3,\;4.4;MgSO_4{\cdot}7H_2O,\;0.8;KCl,\;0.4;CaCl_2,\;0.27;H_3PO_4,\;1.0ml/l;\;and\;trace elements\;(mg/l):H_3BO_3,\;0.25;CuSO_4,\;0.6;MnSO_4,\;2.2;Na_{2}MoO_4,\;0.5;ZnSO_4,\;6.0;FeSO_4,\;8.0;CoCL_2,\;1.0;$ and Na-EDTA, 30.0. Using this statistical optimization method, the relative biosurfactant yield as critical micelle dilution (CMD) was increased from $10{\times}\;to\;105{\times}$, which is ten times higher than the non-optimized rich medium.

Tribological Characteristics with Concentration ZnDTP Additives in Automotive Engine (자동차 엔진의 ZnDTP 첨가제 농도에 따른 트라이볼로지 특성)

  • Oh, Seong-Mo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.8 no.4
    • /
    • pp.697-702
    • /
    • 2007
  • The lubricational characteristics about friction and wear has an important effect on the material quality of surface. Therefore, in the case of automobile engine oil which is used under severe running condition, or therefore, the seizure and anti-scuffing is very important. We have studied the lubricational characteristics of auto engine oil with additives using Falex wear test machine. We have obtained the studied result is as fellows. In order to more improved the surface roughness characteristics adding the P(phosphate) as additives is excellent at a low temperature. Adding the ZnDTP and Ca-phenate is excellent on the anti-wear and extreme pressure properties at the high load. Moreover, when the ZnDTP and P are added, the temperature properties is excellent because the stability is maintained in a high temperature.

  • PDF

Structural and Magnetic Properties of the Brownmillerite $Ca_2Al_xFe_{2-x}O_5$ System

  • 김귀야;로권선;여철현
    • Bulletin of the Korean Chemical Society
    • /
    • v.16 no.10
    • /
    • pp.934-938
    • /
    • 1995
  • A series of solid solutions in the Ca2AlxFe2-xO5 (x=0.00, 0.50, 0.66, 1.00 and 1.34) system with brownmillerite structure has been synthesized at 1100 ℃ under an atmospheric air pressure. The solid solutions are analysed by powder x-ray diffraction analysis, Mohr salt titration, thermal analysis, and Mossbauer spectroscopic analysis. The x-ray diffraction analysis assigns the compositions of x=0.00 and 0.50 to the space group Pcmn and those of x=0.66, 1.00, and 1.34 to the Ibm2. Mo&ssbauer spectra have shown the coordination state and disordering of Al3+ and Fe3+ ions. The substituting preference of Al3+ ions for the tetrahedral site decreases with increasing x value. Magnetic susceptibility of the system has been measured in the temperature range of 5 K to 900 K. The solid solutions of the compositions of x=0.00, 0.50 and 0.66 have shown a thermal hysteresis and the thermoremanent magnetization gap decreases with increasing x value in the above systems. However the compositions of x=1.00 and 1.34 do not show the hysteresis. The exchange integral is calculated from Fe3+ ion occupancy ratio. The integral decreases with x value and thus the magnetic transition temperature decreases with the increasing x value.

Heterogeneously Catalyzed Oxidations of Cyclopentene and of 1-Pentene (시클로펜텐과 1-펜텐의 불균일 촉매 산화반응)

  • Yang, Hyun S.;Kim, Young H.
    • Applied Chemistry for Engineering
    • /
    • v.7 no.5
    • /
    • pp.888-901
    • /
    • 1996
  • Oxidations of cyclopentene and of 1-pentene with air have been studied on a V/Mo/P/Al/Ti-mixed oxide catalyst in a fixed bed integral reactor. At high levels of conversion maleic anhydride was in each case produced as the major organic product, along with minor amounts of phthalic anhydride and, only starting from 1-pentene, also of citraconic anhydride. At lower levels of conversion a total of 30 organic products have been identified, some of which may be intermediates on the way from the substrates to the three anhydrides mentioned above. Based on the dependence of selectivities of the organic products on conversion, reaction schemes for the formation of maleic anhydride, phthalic anhydride and citraconic anhydride have been proposed. Oxidation at $310^{\circ}C$ led to increasing conversions and selectivities for maleic anhydride with decreasing space velocities. The highest selectivities for maleic anhydride were obtained at conversion of ca. 100%. Oxidation at a constant space velocity of $2{\cdot}10^4h^{-1}$ led to increasing conversions with increasing temperatures in the range of $300^{\circ}C{\sim}420^{\circ}C$, while the selectivity for maleic anhydride passed through a maximum value of ca. 39% at $370^{\circ}C$ in the oxidation of cyclopentene and a maximum value of ca. 30% at $400^{\circ}C$ in the oxidation of 1-pentene.

  • PDF

Preparation and Certification of Rice Flour Reference Materials for Trace Elements Analysis (미량원소분석을 위한 쌀분말 기준물질의 제조 및 검정)

  • Cho, Kyung-Haeng;Park, Chang-Joon;Woo, Jin-Choon;Suh, Jung-Ki;Han, Myung-Sub;Lee, Jong-Hae
    • Analytical Science and Technology
    • /
    • v.11 no.4
    • /
    • pp.271-280
    • /
    • 1998
  • Rice flour reference materials were prepared from the unpolished rice grown in Korea and certified for elemental composition. The reference materials consist of two samples containing normal and high level. The reference material at elevated level was prepared by spiking to the normal rice flour six toxic elements of As, Cd, Cu, Cr, Hg, Pb with $1.0{\mu}g/g$ on a dry weight basis. Homogeneity of the prepared materials was evaluated through the determination of Ca, Cu, Fe, Mn, Zn by instrumental neutron activation analysis (INAA) and atomic absorption spectrometry (AAS). Small variance of elemental composition among interbottled samples assured homogeneity of the prepared materials. The materials were decomposed by high pressure digestion and microwave digestion method. INAA, AAS, inductively coupled plasma-atomic absorption spectrometry (ICP-AES), ICP-mass spectrometry (MS) and vapour generation techniques were employed to analyze the reference materials. From this independent analytical results, the certified or reference values are determined for As, Ca, Cd, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, P, Pb, Se, Zn.

  • PDF

Mineral Contents in Bottled Natural Water and Estimation of Their Intake by Korean Adults (일부 무기질의 생수 중 함량 분석과 생수를 통한 섭취량 평가)

  • Kim, Moo-Kyung;Sim, Jin-Ah;Eom, Hee-Jung;Kim, Myung-Hee;Choi, Mi-Kyeong
    • Journal of the Korean Dietetic Association
    • /
    • v.16 no.2
    • /
    • pp.116-121
    • /
    • 2010
  • Minerals play an important role in the body as essential nutrients. However, it is not easy to meet DRIs because food sources of minerals are limited. Recently, consumption of bottled natural water has been increasing in Korea due to water pollution and distrust of tap water. The present study was conducted to investigate mineral contents in bottled natural water and their intakes among Korean adults. We analyzed eight minerals in seven kinds of bottled natural water by ICP-spectrometry and conducted a survey on the intake status of water and bottled natural water with 400 Korean young adults. The mean contents of Ca, Mg, Fe, Zn, Cu, Mn, Se, and Mo in bottled natural water were 22.45${\pm}$22.48 mg/L, 10.59${\pm}$9.97 mg/L, 0.27${\pm}$0.18 ${\mu}g/L$, 2.06${\pm}$1.48 ${\mu}g/L$, 5.47${\pm}$0.70 ${\mu}g/L$, 1.43${\pm}$0.37 ${\mu}g/L$, 1.90${\pm}$0.96 ${\mu}g/L$, and 3.34${\pm}$0.79 ${\mu}g/L$, respectively. The mean age, height, weight, and BMI were 22.76 years, 174.94 cm, 68.64 kg, and 22.41 $kg/m^2$ for males (n=150) and 21.25 years, 162.04 cm, 51.05 kg, and 19.46 $kg/m^2$ for females (n=250), respectively. The respective daily intakes of total water and bottled natural water as water itself were 670.30 ml and 212.20 ml for males and 488.04 ml and 132.72 ml for females. The daily intakes of Ca, Mg, Fe, Zn, Cu, Mn, Se, and Mo from bottled natural water were 4.76 mg, 2.25 mg, 0.06 ${\mu}g$, 0.44 ${\mu}g$, 1.16 ${\mu}g$, 0.30 ${\mu}g$, 0.40 ${\mu}g$, and 0.71 ${\mu}g$ for males and 2.98 ${\mu}g$, 1.41 mg, 0.04 ${\mu}g$, 0.27 ${\mu}g$,0.73 ${\mu}g$, 0.19 ${\mu}g$,0.25 ${\mu}g$, and 0.44 ${\mu}g$ for females, respectively. Overall, the contents of Ca, Mg, and Se in bottled natural water were relatively high and the daily intakes of these minerals were 0.4~1.0% of the DRIs.

Quality Evaluation of Red seabream, Pagrus major by Chemoenzymatic Method (효소 화학적 방법에 의한 참돔, Pagrus major의 품질판정)

  • 배진한;김태진;정호진;여해경;심길보;조영제
    • Journal of Aquaculture
    • /
    • v.17 no.3
    • /
    • pp.167-172
    • /
    • 2004
  • Chemoenzymatic method was used in this study to evaluate the quality of cultured red seabrim. Level of ATP related compounds, ATPase and Adenylate energy charge (AEC) well reflected changes in condition of fish. ATP level in the muscle of exercised cultured red seabream was decreased significantly during cultured period. In contrast, the level of ADP in the muscle was increased during the period. Level of ATP related compounds in the muscle of cultured red seabream without exercise didn't show significant difference compared to the exercised group. AEC value in muscle of cultured red seabream without exercise was 0.89$\pm$0.02, while AEC value of the exercised group was 0.88$\pm$0.04. ATP and AEC levels among different size of fish did not show any significant difference. AEC value in all sample was higher than 0.8, indicating that the condition of cultured fish was healthy. Activity of Mg2$^{+}$ (+Ca2$^{+}$), Mg2$^{+}$ (-Ca2$^{+}$) and Ca2$^{+}$-ATPase during culture period did not change significantly, regardless of exercise. Therefore, the AEC appears to have some validity as fish health indicator.