• Journal of Mushroom
• /
• v.10 no.3
• /
• pp.120-128
• /
• 2012

Recently sawdust cultivation of Shiitake mushroom (Lentinula edodes) is increasing. It is important to make mycelia to be brown on the substrate surface. This browned surface in sawdust cultivation plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. In order to isolate genes which related to brown color formation, differential display method was used. Two cDNA fragments obtained by DD-PCR were 1.2 and 1.6kb and these were expressed in white colored mycelia from L. edodes, but not brown colored mycelia. Partial sequencing of these cDNA fragments showed that the 1.6kb cDNA had 100% identity with the microsatellites gene from Dugenia polichroa. However, the other 1.2kb cDNA fragment had poly T tail on 3' region of partial open reading frame on 5' region. The new primer designed based on the sequence of 1.2kb cDNA was constructed. RT-PCR analysis using the newly designed 0.12kb cDNA specific primer showed that the gene was only expressed in white color mycelia, but not in brown color mycelia. Sequence analysis of 5' region of this 1.2kb cDNA revealed that this gene contained partial open reading frame consisted of 110 amino acid. Homology search using DNASIS database showed that this gene had high sequence homology of 66.7% in DNA level and 69.2 % in amino acid level with dTDP-glucose 4,6-dehydratases gene from Arabidopsis thaliata. The dTDP-glucose 4,6-dehydratases gene was known to be function to have tolerance with oxidation stress. These results strongly suggest that this gene isolated from white mycelia of L. edodes might have a function of repressor against mycelia browning. Therefore I designated this gene as BCR (Brown Color Repressor) gene.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.4
• /
• pp.41-50
• /
• 2017

The design of proper agitation system is requisite in biological waste treatment and energy generation plant, which is affected by viscosity, impeller types, and power consumption. In the present work, hydrogen fermentation of food waste was conducted at various operational pHs (4.5~6.5) and substrate concentrations (10~50 g Carbo. COD/L), and the viscosity of fermented broth was analyzed. The $H_2$ yield significantly varied from 0.51 to $1.77mol\;H_2/mol\;hexose_{added}$ depending on the pH value, where the highest performance was achieved at pH 5.5. The viscosity gradually dropped with shear rate increase, indicating a shear thinning property. With the disintegration of carbohydrate, the viscosity dropped after fermentation, but it did not change depending on the operational pH. At the same pH level, the $H_2$ yield was not affected much, ranging $1.40{\sim}1.86mol\;H_2/mol\;hexose_{added}$ at 10~50 g Carbo. COD/L. The zero viscosity and infinite viscosity of fermented broth increased with substrate concentrations, from 10.4 to $346.2mPa{\cdot}s$, and from 1.7 to $5.3mPa{\cdot}s$, respectively. There was little difference in the viscosity value of fermented broth at 10 and 20 g Carbo. COD/L. As a result of designing the agitation intensity based on the experimental results, it is expected that the agitation intensity can be reduced during hydrogen fermentation. The initial and final agitation intensity of 30 g Carbo. COD/L in hydrogen fermentation were 26.0 and 10.0 rpm, respectively. As fermentation went on, the viscosity gradually decreased, indicating that the power consumption for agitation of food waste can be reduced.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.95-103
• /
• 2016

The objective of this study was to investigate feasibility of semi-dry anaerobic digestion using dairy cattle manure and to evaluate solidified fuel value of semi-dry anaerobic digestate. To evaluate semi-dry anaerobic digestion using dairy cattle manure, 950 mL bottle type anaerobic reactor was set in the constant temperature room maintained at $35^{\circ}C$. To produce anaerobic digestate for making solidified fuel, acrylic cylindrical anaerobic digester(1,000 mm width ${\times}$ 450 mm height) was set in the constant room temperature to carry out batch test of semi-dry anaerobic digestion using same dairy cattle manure. Moisture content of dairy cattle manure and inoculum solution for anaerobic digestion were 80.64% and 96.83%, respectively. The dairy cattle manure and the inoculum solution was mixed by 1:1 ratio(v/v) for anaerobic digestion. Water content and VS/TS(Volatile Solids/Total Solids) of mixture of substrate and inoculum were 89.74% and 83.35%, respectively. In case of non-inoculated anaerobic digester, the biogas was not produced. By the semi-dry anaerobic digestion, the calorific value of the digestate was reduced by 20% compare to fresh dairy cattle manure. In other hand, ash content increased from 15% to 18.4%. The contents of Cr, Pb, Cd and S of pellet produced from anaerobically digested dairy cattle manure were not against the standard regulation for livestock manure solidified fuel. Therefore, it can be used as fuel that anaerobic digestate produced after semi-dry anaerobic digestion using dairy cattle manure.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.265-274
• /
• 1998

This study was carried out to obtain the basic data for an artificial cultivation of Phellinus sp.. The optimum conditions for the mycelial growth on the different sawdusts (Quercus aliena, Morns alba and Alnus japonica) substrate of an isolated Phellinus sp. were optimized by response surface methodology. The ratio of rice bran addition to sawdust and the suitable moisture content for the mycelial growth in the all sawdust media were about 30% (w/w) and $65{\sim}70%$ (w/v), respectively. The initial pHs for the mycelial growth of Quercus aliena and Morns alba were in the range of $pH\;5{\sim}6$, whereas Alnus japonica was obtained at pH 6. The optimum temperature for the mycelial growth was about $25{\sim}30^{\circ}C$, depending on the different kinds of wood substrates. From the response surface analysis, the values of independent variables of Quercus aliena at stationary points were determined to be 31.01 % (w/w) of rice bran, pH of 5.31 and 69.03% (w/v) of moisture content, and the expected value of mycelial growth was about 8.32 cm. Both the ratio of rice bran addition to sawdust $(X_1)$ and moisture content $(X_3)$ were effective to the mycelial growth. In the case of Morns alba, the ratio of rice bran addition to sawdust, initial pH and moisture content at the stationary points were 28.77% (w/w), 5.28 and 69.8 (w/v),respectively, and the expected mycelial growth of 7.60 cm was obtained. Stationary points for the mycelial growth in the sawdust media of Alnus japonica were 28.74% (w/w) of rice bran, pH of 6. 04 and 66.96% (w/v) of moisture content, and the expected values of mycelial growth was about 5.38 cm. Based on the above results, there was correlations between the mycelial growth and independent variables, and the effect of rice bran $(X_1)$ and initial pH $(X_2)$ for the mycelial growth were higher than the moisture content $(X_3)$. The optimum species of sawdust media for the my celial growth of Phellinus sp. was in the order of Quercus aliena > Morns alba > Alnus japonica.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.

• The Korean Journal of Mycology
• /
• v.36 no.2
• /
• pp.163-171
• /
• 2008

We have surveyed the variation of physical and chemical characteristics of aerobic and anaerobic outdoor fermentation of cotton wastes using for oyster mushroom cultivation. The inner temperature of cotton wastes fermented aerobically covered with thin cloth and setting pallet at bottom was higher than that of anaerobic fermented cotton wastes covered with P.E vinyl and the maximum temperature was $75^{\circ}C$ at 5th day after fermentation. pH of cotton wastes fermented aerobically was increased up to 8.9 after fermentation of $9{\sim}12$ days, but that of anaerobically fermented was decreased up to 5.0. Total carbon content was decreased but total nitrogen content was increased when fermentation was in progress. Oxygen concentration of cotton wastes fermented aerobically was decreased until 6 days after fermentation but increased after 9 days of fermentation. Ammonia concentration of cotton wastes fermented aerobically and anaerobically was below 10 ppm and $20{\sim}85\;ppm$ respectively. In anaerobic condition the cotton wastes was contaminated with mold ($15{\sim}50%$), where no contamination was found in aerobic condition during spawn running stage. Yields of mushroom grown on cotton wastes aerobically fermented for $6{\sim}9$ days was $23.0{\sim}23.6\;kg$ per $3.3\;m^2$ area.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.441-450
• /
• 2011

This study was conducted to determine the effects of partial replacement of corn grain and soybean meal with agricultural by-product feeds on in vitro rumen fermentation characteristics and optimum levels of mixing ratio. The agricultural by-products to examine the effectiveness of the partial replacement of concentrate were wheat bran, corn gluten feed, bakery waste, soybean curd, rice bran, green kernel rice, soybean hull, distillers' grain, and mushroom substrate. In the first experiment, in vitro ruminal fermentation characteristics of feedstuffs were evaluated at 0, 3, 6, 12, 24, and 48 hours after incubation. In the second experiment, fermentation characteristics were investigated with green kernel rice and soybean curd which replaced corn grain or soybean meal. Feed were formulated with 40% corn grain + 20% soybean meal (T1), 40% corn grain + 17.5% soybean meal + 2.5% soybean curd (T2), 25% corn grain + 20% soybean meal + 15% green kernel rice (T3), and 30% corn grain + 15% soybean meal + 6% green kernel rice + 9% soybean curd (T4), respectively, with forage source of 10% alfalfa hay, 20% timothy hay, and 10% corn silage as fed-basis. In 24 and 48 hour cultivations, T4 showed significantly lower pH compared to T1, whereas in 3 and 24 hour cultivations, T4 showed significantly higher DM degradation compared to T1. In addition, the gas production of T3 was also higher than T1 (p<0.05). Overall results of the present experiments indicated that green kernel rice and soybean curd as agricultural by-products have the possibility of partial replacements of corn grain and soybean meal.

• Journal of Mushroom
• /
• v.3 no.4
• /
• pp.133-139
• /
• 2005

Fruiting bodies of Cordyceps have been regarded as popular folk and effective medicines to treat human diseases such as asthma, bronchial and lung inflammation, and kidney disease. Cordyceps pruinosa (Clavicipitaceae; Hypocreales; Ascomycotina) has received special attention for medicinal purpose due to its various physiological activites. The nucleoside derivative N6-(2-hydroxyethyl) adenosine (HEA) isolated from it showed a $Ca^{2+}$ antagonistic effect and negative inotropic response. The artificial production of fruiting body of C. pruinosa has not been tried successfully yet by using living silkworm substrate. To develop techniques for the production of C. pruinosa stromata on a large scale, the infection of Bombyx mori with C. pruinosa and the growth characteristics of stroma of C. pruinosa were investigated. Also, studied about biological activities of fruiting body formed on silkworm. Infection rate of the silkworm pupae with C. pruinosa was the highest in injection inoculation. The formation of the fruiting body of C. pruinosa was quite good in the room controlled at $21{\sim}25^{\circ}C$, over 91% of relative humidity and over 1500 lx. Glucose concentration was high in the fruiting bodies of the silkworm pupae infected with C. pruinosa on a dry weight basis. The most abundant amino acid in the fruiting bodies was arginine and phenylalanine. The fruiting bodies of silkworm pupae infected with C. pruinosa was rich in oleic acid. The high amount of citric acid was found in the fruiting bodies of silkworm pupae infected with C. pruinosa.