• 한국주조공학회지
• /
• 제20권6호
• /
• pp.386-394
• /
• 2000

In the present study, the effect of yttrium addition on the microstructure and mechanical property of rapidly solidified AZ91 alloy by melt spinning process is estimated. As yttrium was added, the microstructure of RS ribbons and extrudates became finer than those of AZ91, and RE related phases $(Al_2RE)$ were formed. In the case of the addition of 3wt%Y, the microstructure of extrude showed the finest grain size. At room temperature, the AZ91 + 3wt%Y alloy showed the highest tensile strength, 352 MPA due to precipitation of ${\beta}(Mg_{17}Al_{12})$ phase and $Al_2RE$ phase. At the elevated temperature, the mechanical property of AZ91 + 3wt%Y alloy was higher than those of other Mg alloys. The reasons were that $Al_2Y$ compound was thermally stable and suppressed the grain growth. In contrast with $Al_2Y$ compounds, ${\beta}$ phase was thermally unstable and could not suppress the grain growth at the elevated temperature. Therefore, $Al_2Y$ phase contributed to improve the thermal stability of RS AZ91 alloy.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.717-723
• /
• 2006

Lead free $(Na_{0.5}K_{0.47}Cd_x)NbO_3$ ceramics (x=0.015-0.005) were prepared by the conventional mixed oxide route. The effects of CdO addition on the sintering, dielectric and piezoelectric properties of the samples were examined. The addition of CdO greatly enhanced the sinterability of ceramics and the sample has a lower dielectric loss. The $k_p\;and\;Q_m$ of the samples with 0.02 mol CdO addition are 0.35 and 125, respectively, The $(Na,K)NbO_3$ ceramics show a large degradation of $k_p$ due to the deliquescence when exposed to humidity, while the $(Na,K,Cd)NbO_3$ ceramics have no a significant degradation of it.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.40-48
• /
• 2012

In this study, economic analysis of five desalination technologies for saline agricultural land was carried out. The analysis was comprehensively evaluated by calculating changes in crop production and benefit/cost (B/C) ratio. The analysis of crop production was in the order of tomato > cucumber > a (musk) melon > watermelon > cabbage, and economical efficiency for desalination technology was in the order of soil exchange > soil addition > electrokinetics > under-drainage > subsoil reversal. In cost benefit analysis, B/C ratio was in the order of under-drainage > soil exchange > electrokinetics > soil addition > subsoil reversal, and all desalination technologies used in this study have the ratio higher than 1, which means economical efficiency was high. Based on the net production considering B/C ratio, the general economic analysis was exactly order from that of crop production analysis. As a result, economical efficiency of soil exchange was highest, and economical efficiency of soil addition and electrokinetic was relatively higher than others.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.65-70
• /
• 2013

In joining Alumina to copper plate by Mo-Mn metallizing process, the effects of the composition of metallizing paste on the bonding strength were investigated. The bonding strength increased with increasing Mn amount in the paste up to 20% but followed by the decrease with addition of Mn. The maximum bonding strength reached 50MPa at 20%Mn when heated to $1550^{\circ}C$ for 60minute. The addition of Si to the metallizing powder increased the bonding strength of the joint by enhancing the mechanical bonding between the Alumina and the metallizing layer due to the decrease of layer viscosity with the addition of $SiO_2$. It is thought that MnO reacted with $Al_2O_3$ to yield $MnAl_2O_4$ spinel, forming a joint.

• Structural Engineering and Mechanics
• /
• 제90권2호
• /
• pp.107-116
• /
• 2024

This study examined the changes in the mechanical properties of coral concrete under different coconut fiber admixtures. To accomplish this goal, the compressive strength, splitting tensile strength, flexural strength and elastic modulus properties of coral concrete blocks reinforced with coconut fibers were measured. The results showed that the addition of coconut fiber had little effect on the cube and axial compressive strengths. With increasing coconut fiber content, the flexural strength and splitting tensile strength of the concrete changed substantially, first by increasing and then by decreasing, with maximum increases of 36.0% and 12.8%, respectively; additionally, the addition of coconut fibers resulted in a failure type with some ductility. When the coconut fiber-reinforced coral concrete was 7 days old, it reached approximately 74% of its maximum strength. The addition of coconut fiber did not affect the early strength of the coral concrete mixed with seawater. When the amount of coconut fiber was no more than 3 kg/m3, the resulting concrete elastic modulus decreased only slightly from that of a similar concrete without coconut fiber, and the maximum decrease was 5.4%. The optimal dose of coconut fiber was 3 kg/m3 in this study.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.121-129
• /
• 2008

본 논문에서는 FMM(Fast Multipole Method)을 적용하여 평면형 다층 구조인 마이크로스트립 프랙탈 안테나 구조에 대한 고속 해석을 구현하였다. 우선 FMM 알고리즘에 이용되는 적분식인 MPIE(Mixed Potential Integral Equation)을 풀기 위해서 실수축 적 분 방법(RAIM: Real-Axis Integration Method)으로부터 정확한 공간 영역 그린함수를 구한다. 구해진 그린함수를 MoM(Method of Moment)을 이용하여 계산할 경우, 연산과 메모리 요구량 $O(N^2)$이 소요되는데, 이를 거대 구조의 해석에 대해 적용할 때나 높은 정확성을 위한 셀(미지수 N) 수의 증가하는 경우 계산량이 기하급수적으로 증가하여 구조 해석에 문제가 된다. FMM은 이와 같은 연산과 메모리 요구량의 문제점을 해결하기 위하여 개발되었다. FMM은 그린함수의 가법 정리(addition theorem)를 이용하여 행렬-벡터 곱의 복잡성을 줄여 연산과 메모리 요구량을 $O(N^{1.5})$으로 줄인다. 시어핀스키(Sierpinski) 프랙탈 안테나의 구조에 대해 MoM과 FMM를 적용, 상용 툴과 계산 결과의 정확성, 계산 시 메모리 크기, 해석 시간 등을 비교하여 효율성을 보여주었다.

• 한국재료학회지
• /
• 제11권3호
• /
• pp.203-206
• /
• 2001

SrTiO$_3$첨가량 및 소결온도에 따른 YIG 소결체의 미세구조 및 자기적 특성변화에 대하여 조사하였다. 소량의 SrTiO$_3$소결재를 첨가한 결과 소결체의 격자상수는 약간 증가하였으며, 이는 소결시 $Y^{+3}$, Fe$^{+3}$이온이 이온반경이 상대적으로 큰 Sr$^{+2}$, Ti$^{+4}$이온으로 치환되었기 때문인 것으로 추정된다. SrTiO$_3$소결재를 0.2mo1% 첨가하고, 142$0^{\circ}C$에서 소결한 소결체의 밀도는 이론밀도의 98%이상의 치밀화를 얻을 수 있었다. 상온에서의 포화자화값(M$_s$)은 SrTiO$_3$소결재의 첨가량이 증가함에 따라 약간 감소하였으나 큰 변화는 없었다. 더욱이 온도에 따른 보자력 (H$_c$)의 변화는 없었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권3호
• /
• pp.354-362
• /
• 2018

Objective: Wheat is an alternative to corn silage for ruminant feeding in northern China. This study examined the effects of harvest time and added molasses on nutritional content, ensiling characteristics and in vitro degradation of whole crop wheat (WCW). Methods: Fresh WCW at the milk-ripe stage was harvested at 0700 h (i.e., in the morning [Mo]) and 1700 h (i.e., in the afternoon [Af]), and then immediately used to prepare silage and make hay. Commercial molasses was added to Af WCW at 0%, 2%, 4%, and 6% (fresh weight) proportions. The WCW treated with molasses was mixed thoroughly prior to ensiling. Results: Dry matter (DM), neutral detergent fiber, water soluble carbohydrate (WSC) content (p<0.01), accumulative gas production in 72 h ($GP_{72h}$, 77.46 mL/g vs 95.15 mL/g) and dry matter disappearance in vitro (69.15% vs 76.77%) were lower (p<0.05), while crude protein (CP) content was higher for WCW silage (WCWS) compared to WCW (p<0.01). The propionic acid and butyric acid concentrations in WCWS from Mo WCW were 1.47% and 0.26%, respectively. However, the propionic and butyric acid concentrations were negligible, while the ammonia nitrogen/total nitrogen ($NH_3-N/TN$, p<0.01) concentration was lower and the rate of gas production at 50% of the maximum (17.05 mL/h vs 13.94 mL/h, p<0.05) was higher for Af WCWS compared to Mo WCWS. The incubation fluid's $NH_3-N$ concentration was lower in WCWS and Af WCW compared to Mo WCW (p<0.05). The CP and WSC content increased with increasing molasses levels (p<0.05). Furthermore, the pH (p<0.01) and time when gas production was 50% of the maximum (2.78 h vs 3.05 h, p<0.05) were lower in silage treated with 4% molasses than silage without molasses. Conclusion: Harvesting wheat crops in the afternoon and adding molasses at 4% level to WCW optimally improved ensiling characteristics, leading to well-preserved silage.

• 한국유기농업학회지
• /
• 제23권1호
• /
• pp.123-131
• /
• 2015

2006년부터 2010년까지 국내 고추 노지재배 포장을 대상으로 경상남도와 제주도를 제외한 강원도 11개 지역 등 전국에 걸쳐 총 83개 지역을 중심으로 바이러스 이병체를 채집하여 연차별 고추 발생 바이러스의 발병률, 바이러스 종류 및 감염 형태를 조사하였다. 2006년부터 2010년까지의 고추에서의 평균 단독 감염률은 46.6%, 복합 감염률은 48.0%로 조사되어 고추 생산에 있어서 가장 큰 위해요소는 바이러스 발병으로 나타났다. 바이러스별로는 CMV가 평균 34.8% 발병률로 가장 우점 바이러스로 조사되었다. 반면 BBWV2는 낮은 발병율을 보여주었으며, TSWV는 충남과 전남지역에 국한되는 것으로 조사되었다. 따라서 고추 노지재배 시 발생하는 바이러스의 위해도를 발병률에 따라 구분하면 CMV, PMMoV, 그리고 PepMov 순으로 조사되었다. 또한 복합 감염의 발생도 모든 조사지역 시료에서 검출되었으며, 이에 대한 감염 별 바이러스 종류와 발생률을 분석하였다. 복합 감염에서 가장 빈번하게 검출된 바이러스는 CMV로, CMV+BBWV2, CMV+PepMoV, CMV+PMMoV의 복합 감염형태가 검출률이 높게 나타났다. 따라서 고추의 유기농 재배 생산에 가장 큰 위협요인으로 작용하는 바이러스의 적절한 대책마련을 위한 지속적인 바이러스 모니터링과 3종 이상의 복합 감염 위해성을 판단하기 위한 추가 연구가 필요하다고 사료된다.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.373-383
• /
• 1996

In order to compare the accuracy of impression method using addition silicone putty impression material, metal master die was fabricated with 4 cylindrical abutments that were similar in shape to mandibular arch. Among the 4 abutments, two(A, D) with 8mm width and 7mm height were formed in the 2nd molar regions and the other two(B, C) with 6mm width and 7mm height were on the canine regions. Impressions were taken using one-step putty wash impression technique and two-step putty wash impression technique by three different types of impression materials(Perfect, Express, Exaflex). Upon measuring the distance between the abutments on the model by three dimensional measuring machine, the percent of devitaion of the materials were obtained, rendering the following results. The results obtained are as follows : 1. There was no significant difference in accuracy in regard with the impression method between one-step putty wash impression technique and two-step putty wash impression technique using addition silicone putty impression material. 2. There were no difference in accuracy among with three different addition silicone putty impression materials. 3. All the distances between abutments on improved stone models increased in comparison with those on the metal master model.