• 한국자기학회지
• /
• 제7권1호
• /
• pp.44-48
• /
• 1997

약 30 nm의 미세결정립으로 구성된 ( .alpha. -Fe)-(Nd$_{2}$Fe$_{14}$B$_{1}$)형 저 Nd함유 Nd-Fe-B계 합금이 급속응고법으로 제조된 비정질상으로 부터 결정화하여 제조되었다. Nd$_{4}$Fe$_{82}$B$_{10}$Mo$_{3}$Cu$_{1}$ 조성에 Ga의 첨가는 각형성 개선효과와 함께 잔류자화를 1.29 T까지 증가시킨다. Nd의 함유량을 증가시킨 초미세결정립 Nd$_{5}$Fe$_{81}$B$_{9}$Mo$_{3}$Cu$_{1}$Ga$_{1}$ 합금의 Nd$_{2}$Fe$_{81}$B$_{9}$Mo$_{3}$Cu$_{1}$Ga$_{1}$ 합금의 잔류자화, 보자력 및 최대자기에너지적은 각각 1.24 T, 257.4 kA/m(3.23 kOe), and 100.3 kJ/m$^{3}$(12.6 MGOe)이다.다.

• Journal of Welding and Joining
• /
• 제26권3호
• /
• pp.37-44
• /
• 2008

Charpy V-Notch test is commonly used to evaluate fracture toughness. However, since the region to be evaluated is limited to bulk material due to the specimen size required, individual evaluation of micro-structures on weldment is very difficult. In this study, ASP(Advanced Small Punch) test was carried out to evaluate material degradation and fracture toughness on the B.M, W.M and each micro-structures of HAZ for X20CrMoV121 and 2.25Cr1Mo steels with artificial aging time. In addition, to evaluate fracture toughness and material degradation of B.M and W.M of X20CrMoV121 steels with aging times, CVN (Charpy V-notch) test was performed. And then the correlation between ASP and CVN test on X20CrMoV121 steels was obtained. Furthermore, through this correlation, material degradation property of each micro-region of the HAZ in weldment, which was impossible to be evaluated by the CVN test, can be estimated and determined.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.561-571
• /
• 1999

Microstructure and mechanical properties of five Cr-Mo steels for nuclear industry applications have been investigated. Transmission electron microscopy, energy dispersive spectrometer, differential scanning calorimeter, hardness, tensile, and impact test were used to evaluate the Cr and W effect on the microstructure and mechanical properties. Microstructures of Cr-Mo steels after tempering are classified into three types : bainitic 2.25Cr-lMo steel, martensitic Mod.9Cr-lMo, HT9M, and HT9W steels, and dual phase HT9 steel. The majority of the precipitates were found to be M$_{23}$C$_{6}$ carbides. As minor phases, fine needle-like V(C,N), spherical NbC, fine needle-like Cr-rich Cr$_2$N, and Cr-rich M$_{7}$C$_3$were also found. Addition of 2wt.% W in Cr-Mo steels retarded the formation of subgrain and dissolution of Cr$_2$N precipitates. Hardness and ultimate tensile strength increased with increasing Cr content. Though Cr content of HT9W steel was lower than that of HT9 steel, the hardness of HT9W was higher due to the higher W content. W added HT9W steel had the highest ultimate tensile strength above $600^{\circ}C$. But impact toughness of W added steel (HT9W) and high Cr steel (HT9) was low.w.w.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.460-463
• /
• 2002

$MoO_3$ thin films were deposited on electrode and heater screen-printed alumina substrates in $O_2$ atmosphere by RF reactive sputtering using Molybdenum metal target. The deposition was performed at $300^{\circ}C$ with 350W of a forward power in an $Ar-O_2$ atmosphere. The working pressure was maintained at $3{\times}10^{-2}mtorr$ and all deposited films were annealed at $500^{\circ}C$ for 5hours. To investigate gas sensing characteristics of the addition doped $MoO_3$ thin film, Co, Ni and Pt were used as adding dopants. The sensing properties were investigated in tenn of gas concentration under exposure of reducing gases such as $H_2$, $NH_3$ and CO at optimum working temperature. Co-doped $MoO_3$ thin film shows the maximum 46.8% of sensitivity in $NH_3$ and Ni-doped $MoO_3$ thin film exhibits 49.7% of sensitivity in $H_2$.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.555-561
• /
• 2013

The hardenability of low-carbon boron steels with different molybdenum and chromium contents was investigated using dilatometry, microstructural observations and secondary ion mass spectroscopy (SIMS), and then discussed in terms of the segregation and precipitation behaviors of boron. The hardenability was quantitatively evaluated by a critical cooling rate obtained from the hardness distribution plotted as a function of cooling rate. It was found that the molybdenum addition was more effective than the chromium addition to increase the hardenability of boron steels, in contrast to boron-free steels. The addition of 0.2 wt.% molybdenum completely suppressed the formation of eutectoid ferrite, even at the slow cooling rate of $0.2^{\circ}C/s$, while the addition of 0.5 wt.% chromium did this at cooling rates above $3^{\circ}C/s$. The SIMS analysis results to observe the boron distribution at the austenite grain boundaries confirmed that the addition of 0.2 wt.% molybdenum effectively increased the hardenability of boron steels, as the boron atoms were significantly segregated to the austenite grain boundaries without the precipitation of borocarbide, thus retarding the austenite-to-ferrite transformation compared to the addition of 0.5 wt.% chromium. On the other hand, the synergistic effect of molybdenum and boron on the hardenability of boron steels could be explained from thermodynamic and kinetic perspectives.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.260-264
• /
• 2016

In this study, fractured surface morphology and mechanical properties of Ni-Cr-Mo alloys with various contents of Mo for dental material use have been evaluated by mechanical test. The alloys used were Ni-13Cr-xMo alloys with Mo contents of 4, 6, 8, and 10 wt.%, prepared by using a vacuum arc-melting furnace. Ni-13Cr-xMo alloys were used for mechanical test without heat treatment. The phase and microstructure of alloys using an X-ray diffraction (XRD) and optical microscopy (OM) were evaluated. To examine the mechanical properties of alloys according to microstructure changes, the tensile test and the hardness test were carried out using tensile tester. To understand the mechanism of Mo addition to Ni-Cr alloy on mechanical property, the morphology and fractured surfaces of alloys were investigated by field-emission scanning electron microscope (FE-SEM). As a result, 79Ni-13Cr-8Mo alloy was verified that the tensile strength and the hardness were better than others. Varying Mo content, the changes of microstructures of alloys were identified by OM and SEM and that of 79Ni-13Cr-8Mo alloy was proved fabricated well. Microstructures of alloys were changed depending on Mo content ratio. It has been observed that 8% alloy had the most suitable mechanical property for dental alloy.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.57-68
• /
• 2018

The main objective of this study is to prepare the bionanocomposite films using mungbean starch (MBS), PVA, ZnS, and plasticizers, and to evaluate the physical properties, thermal stability, and photocatalytic activity. The bionanocomposite films were cross-linked by heat-curing process. The ZnS and bionanocomposite films were characterized by FT-IR, XRD, and SEM. The results indicated that the mechanical properties and water resistance enhanced up to 1.2-1.5 times by the addition of nano-ZnS particles, and the thermal stability was improved by the addition of nano-ZnS particles. The photocatalytic activity of the bionanocomposite films added nano-ZnS particles was examined using bisphenol A (BPA) and methyl orange (MO). In addition, the photodegradation efficiency of BPA and MO was evaluated using the pseudo-first order kinetic model (PFOK).

• 대한화학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 1982

Thiophenol이 ${\alpha}$-methylstyrene에 부과되는 반응에 대하여 CNDO/2 방법을 써서 분자궤도론적으로 고찰하였다. 전체 부가반응은 두 단계, 즉 (1)티오페놀이 분해하여 Phenylthiyl 라디칼이 되는 단계와 (2)이 라디칼이 ${\alpha}$-methylstyrene에 부가되어 새로운 단위체 라디칼이 되는 단계로 되어 있으나 부가반응속도를 결정하는데 지배적인 과정은 첫째 (1)과정임을 계산결과로 알 수 있었다. 이것이 바로 thiyl라디칼의 치환기에 대한 Hammertt관게에서 陰의 ${\rho}$값이 실험적으로 얻어진 이유이다. ${\rho}$-chlorophenylthiyl 및 m-trifluoromethyl phenylthiyl 라디칼이 ${\rho}$-methoxy-${\alpha}$-methylstyrene에 부가될 때 Hammett 직선관계로 부터 벗어나는 이유는 전체 반응속도에 미치는 부가반응단계 (2)의 기여가 증가하였기 때문이라고 설명 할 수가 있었다.

• 폴리머
• /
• 제24권2호
• /
• pp.237-244
• /
• 2000

탄화 매트릭스의 전구체로 사용된 페놀수지에 세라믹 분말인 이규화몰리브덴 (MoSi$_2$)을 0, 4, 12, 20%의 중량비로 각각 고르게 분산시켜, 여기에 PAN계 탄소섬유를 함침하여 프리프레그법을 이용하여 일방향 탄소섬유/페놀수지 복합재료를 제조하였으며, 이를 다시 탄화(110$0^{\circ}C$) 시켜서 일방향 탄소/탄소 복합재료를 제작하였다. 본 연구에서는 난소/탄소 복합재료에 산화 억제제로 사용된 MoSi$_2$의 첨가량에 따른 복합재료의 산화거동을 산화분위기 하 600-100$0^{\circ}C$의 온도범위에서 조사하였다. 그 결과, MoSi$_2$를 함유한 탄소/탄소 복합재료는 복합재료 내치 기공 감소와 산소에 대한 유동 확산 방지막의 형성으로 인하여 카본 활성종이 방해를 받아 MoSi$_2$를 함유하지 않은 것에 비해 산화속도가 감소되어 내산화성이 향상되었다. 이는 산소의 공격에 대한 보호층을 형성하는 MoSi$_2$ 고유의 특성에 따른 영향이라 사료된다.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.484-488
• /
• 2007

Mo(Ti) alloy and pure Cu thin films were subsequently deposited on $SiO_2-coated$ Si wafers, resulting in $Cu/Mo(Ti)/SiO_2$ structures. The multi-structures have been annealed in vacuum at $100-600^{\circ}C$ for 30 min to investigate the outdiffusion of Ti to Cu surface. Annealing at high temperature allowed the outdiffusion of Ti from the Mo(Ti) alloy underlayer to the Cu surface and then forming $TiO_2$ on the surface, which protected the Cu surface against $SiH_4＋NH_3$ plasma during the deposition of $Si_3N_4$ on Cu. The formation of $TiO_2$ layer on the Cu surface was a strong function of annealing temperature and Ti concentration in Mo(Ti) underlayer. Significant outdiffusion of Ti started to occur at $400^{\circ}C$ when the Ti concentration in Mo(Ti) alloy was higher than 60 at.%. This resulted in the formation of $TiO_2/Cu/Mo(Ti)\;alloy/SiO_2$ structures. We have employed the as-deposited Cu/Mo(Ti) alloy and the $500^{\circ}C-annealed$ Cu/Mo(Ti) alloy as gate electrodes to fabricate TFT devices, and then measured the electrical characteristics. The $500^{\circ}C$ annealed Cu/Mo($Ti{\geq}60at.%$) gate electrode TFT showed the excellent electrical characteristics ($mobility\;=\;0.488\;-\;0.505\;cm^2/Vs$, on/off $ratio\;=\;2{\times}10^5-1.85{\times}10^6$, subthreshold = 0.733.1.13 V/decade), indicating that the use of Ti-rich($Ti{\geq}60at.%$) alloy underlayer effectively passivated the Cu surface as a result of the formation of $TiO_2$ on the Cu grain boundaries.