• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.610-613
• /
• 1995

The effect of processing parameters such as milling, additives and sintering atmoshpere on the magnetic properties of Mn-Zn ferrite was investigated. The experiment was followed by general ceramic fabrication process and added additives were $CaCO_{3}$, $SiO_{2}$, $V_{2}O_{5}$, $ZrO_{2}$, and $Nb_{2}O_{5}$. The effects of additives could be divided into three categories which were formation ofliquid phase, substitution in lattice and inducing stress. Core loss smong the magnetic properties was dependent mainly on the additives and also correlated with processing parameters. As a result, an optimum condition of preparing process for a high quality Mn-Zn ferrite was suggested by controlling the correlation of each processing parameters.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1065-1070
• /
• 2000

TiO$_2$의 첨가가 Mn-Zn ferrites의 전자기적 물성에 미치는 효과에 대해 연구하였다. TiO$_2$의 첨가량이 증가함에 따라 밀도와 전기비저항이 증가된 반면 초기투자율은 감소하였다. TiO$_2$의 첨가에 따라 Fe$^{2+}$ ion의 증가에 기인하여 전력손실의 최소 값을 나타내는 온도가 저온으로 이동하였다. TiO$_2$를 0.12wt% 첨가한 시편의 경우, 100 kHz, 200 mT, 8$0^{\circ}C$ 측정 조건에서는 소결온도가 증가함에 따라 전력손실이 감소하였으며 125$0^{\circ}C$ 소결한 시편이 340 mW/㎤으로 가장 낮은 값을 보였다. 500 kHz, 50 mT, 8$0^{\circ}C$의 측정 조건에서는 소결 온도가 감소함에 따라 전력손실이 감소하였으며 115$0^{\circ}C$ 소결한 시편이 105 mW/㎤으로 가장 낮은 전력손실 값이 관찰되었다.

• Journal of the Korean Ceramic Society
• /
• v.28 no.7
• /
• pp.556-560
• /
• 1991

The behavior of Ni-Zn ferrite/Mn-Zn ferrite composite electromagnetic absorber was investigated. The imaginary part of complex permeability of the composite was higher than that of either ferrite alone at all frequency range (50∼1400MHz) studied. The difference, which was pronounced in low frequency range, was reached the maximum value when the composite consisted of constituent ferrites with equal amount. Since the thickness in inversely proportional to the imaginary part of complex permeability for the ferrite absorber, it was possible to reduce the thickness of electromagnetic absorber by employing a composite of two different ferrites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.905-908
• /
• 2001

The microstructure and the magnetic properties of Mn-Zn ferrite, which were power loss and saturation magnetic flux density, were investigated as the function of the process before firing. The highest initial permeability and the lowest power loss were attained to the specimen with CaO 400 ppm as a resulted from the highest solubility to SiO$_2$and the creation of liquid phase which improved sintering. The biggest grain size, the highest saturation magnetic flux density and the lowest power loss, which was resulted from that the eddy current loss increased as grain size increased but the hysteresis loss much more decreased and the hysteresis loss strongly influenced on the total power loss rather than the eddy current loss, were obtained to the Mn-Zn ferrite added 2wt% PVA. The power loss was lowest and the saturation magnetic flux density was highest in case of 1 ton/$\textrm{cm}^2$ and the grain size was not influenced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.652-655
• /
• 2001

Power transformers are increasingly becoming more significant in the advancement of electronic equipment. A high-performance, low-cost core material is necessary in order th come up with power transformers in the smallest and lightest scale possible and with low power requirements. In this study, we added V$_2$O$_{5}$ and CaCo$_3$to Mn-Zn ferrite to produce a high-performance low-cost core material. The compositions used were MnO : ZnO : Fe$_2$O$_3$= 37 : 11 : 52 mol%. The materials were sintered at 125$0^{\circ}C$ for three hours. Initial permeability was measured at 0.1MHz. At 200mT, power loss was measured by changing the temperature at 25KHz, 50KHz, 100KHz. When we added 0.lwt% and 0.1%wt% of V$_2$O$_{5}$와 CaCo$_3$, respectively we obtained 405 405KW/㎥ at 200mT, 100KHz, 6$0^{\circ}C$. We tan reduce eddy current loss as a primary loss of high frequency by adding a small amount of V$_2$O$_{5}$와 CaCo$_3$. This reduces power loss in the power transformersormers

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.05a
• /
• pp.57-58
• /
• 1991

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.31-31
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1995.11a
• /
• pp.133-133
• /
• 1995

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.140.1-140.1
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.67.2-67
• /
• 2000