• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.61-66
• /
• 2003

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores used for the blocking filter in he Power Line Communication(PLC) application were investigated as the function of additives. The highest density and permeability of 4.98 g/㎤) and 8,221 respectively were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$ 51 mol% added MnO$_3$ 400 ppm, SiO$_2$ 100 ppm and CaO 200 ppm since the uniform grains were organized and the microstructures were compacted through reduction of pores. The permeability was increased up to 13,904 as temperature of specimen increased to 11$0^{\circ}C$, however, it was decreased precipitously under 100 over 11$0^{\circ}C$. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz that the maximum temperature of specimens became 102$^{\circ}C$ at 1 MHz. In the consequence, the Mn-Zn ferrite core developed by this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93$^{\circ}C$ in the range of 10 kHz to 450 kHz bandwidth qualified for PLC.

• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.767-772
• /
• 2006

Generally, a silicone rubber and a chlorinated polyethylene(CPE) have been used as a binder for the development of high-performance composite EM(Electro Magnetic) wave absorbers. In this paper, the EM wave absorption performance of natural lacquer, which is newly proposed as a binder was investigated. The prepared MnZn ferrite EM wave absorbers are mixed with natural lacquer showed excellent EM wave absorption characteristics compared with MnZn ferrite EM wave absorbers which are mixed with the conventional binders. MnZn ferrite EM wave absorbers mixed with natural lacquer were prepared and their absorption ability was also investigated The EM wave absorbers are fabricated in different proportions of MnZn, or NiZn ferrite and natural lacquer, and their reflection coefficients are measured. The permittivity and permeability are calculated by using the measured reflection coefficients. The EM wave absorption abilities are calculated according to different thicknesses of the EM wave absorbers.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.157-161
• /
• 2006

Generally, a silicone rubber and a chlorinated polyethylene(CPE) have been used as a binder for the development of high-performance composite EM(Electro Magnetic) wave absorbers. In this paper, the EM wave absorption performance of natural lacquer, which is newly proposed as a binder was investigated. The prepared MnZn ferrite EM wave absorbers are mixed with natural lacquer showed excellent EM wave absorption characteristics compared with MnZn ferrite EM wave absorbers which are mixed with the conventional binders. MnZn ferrite EM wave absorbers mixed with natural lacquer were prepared and their absorption ability was also investigated. The EM wave absorbers are fabricated in different proportions of MnZn, or NiZn ferrite and natural lacquer, and their reflection coefficients are measured. The permittivity and permeability are calculated by using the measured reflection coefficients. The EM wave absorption abilities are calculated according to different thicknesses of the EM wave absorbers.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.40-45
• /
• 2016

Nickel substituted nano-sized ferrite powders, $Co_{1-x}Ni_xFe_2O_4$, $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$), were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently compared. The lattice constants decreased as quantity of nickel substitution increased, while the particle size decreased in $Co_{1-x}Ni_xFe_2O_4$ ferrite but increased for the $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites. For the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$) ferrite powders, the $M{\ddot{o}}ssbauer$ spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of $Mn_{0.8}Zn_{0.1}Ni_{0.1}Fe_2O_4$ consisted of two Zeeman sextets and one single quadrupole doublet due to the ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explain the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. The saturation magnetization decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. The coercivity decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. These variations could thus be explained by using the site distribution equations, particle sizes and spin magnetic moments of the substituted ions.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1999년도 추계연구발표회 논문개요집
• /
• pp.38-39
• /
• 1999

• 한국결정성장학회지
• /
• 제1권2호
• /
• pp.23-33
• /
• 1991

Mn-Zn Ferrite는 단결정을 성장하기 위하여 용융하는 동안 불균질 용융과 ZnO휘발의 고유특성을 갖는 재료이다. 그 결과로, 결정성장축을 따라 양이온의 분포가 불균일 하게 된고 또한 기존의 Bridgman법에서는 도가니내에서 용융대가 장시간 유지됨으로써 백금입자가 결정안으로 침입하게된다. 이들은 훼라이트의 자기적 성질을 저하시키는 성질을 갖고 있다. 그러나 새로운 성장법에서는 이러한 단점들을 극복하고 양질의 단결정을 얻기 위하여 결정성장 인자들의 관계를 고찰하였으며 그 인자들은 다음과 같다 : 도가니내의 melt 높이, melt의 표면장력과 밀도, 계면에서의 melt거동, 도가니와 고액계면의 형상, 원료공급속도, 결정성장속도. 아울러, 성장된 결정의 조성을 분석하였을 때 초기조성과 비교하여 $\textrm{Fe}_2\textrm{O}_3$ 1.5 mol%, MnO, Zn 2.0 mol% 이내로 조성 변동은 각각 억제되었고 성장결정면 (110)에서 화확적인 etching 법을 이용하여 광학현미경을 통해 결정내부등을 관찰하였으며, 자기적 특성등을 측정하였다.

• 한국세라믹학회지
• /
• 제16권2호
• /
• pp.69-76
• /
• 1979

This study attempted to characterize the powder and sintered specimen of Mn-Zn ferrite that was prepared by Hot Petroleum Drying Method. The results of the experiment were as follows: 1. The mixed sulfate powder prepared by Hot Petroleum Drying Method was homogeneous and very reactive. The ferrite formation of this powder occurred at lower temperature than the one prepared by Sulfate Dry Mixing Method. 2. The calcined oxide powder prepared by Hot Petroleum Drying Method was found to be agglomerated, and therefore it was very difficult to compact this powder. 3. The sintered density was 4.95g/㎤, 97% of the theoretical density, when the specimen was prepared by Hot Petroleum Drying method, calcined at 90$0^{\circ}C$ in air for 3h, sintered at 1,30$0^{\circ}C$ in air for 3h, and then cooled in nitrogen. 4. The discontinuous grain growth occurred at lower temperature in the specimen prepared by Hot Petroleum Dyring Method than in the one prepared by Sulfate Dry Mixing Method. The discontinuous grain growth was considered to be due to the presence of liquid formed by addition of CaO and $SiO_2$.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.652-660
• /
• 1990

Oxidation of Mn-Zn ferrite was made in air at various temperatures ranging from 400$^{\circ}C$ to 1150$^{\circ}C$. Subsequent reduction fo these oxidized samples was also made in air at 1300-1350$^{\circ}C$ where the spinel phase of Mn-Zn ferrite is stable. Morphological observation revealed that the shape of precipitated hematite was plate or lath type on the close-packed habit plane of {111} ferrite which has a definite orientation relationship. The growth of precipitates showed the behavior fo parabolic dependence of the oxidating time. An apparent activation energy for the growth was found to be 125${\pm}$3Kcal/mol. The fact that pores are observed along the precipitates illustrates the oxidation to occur dominantly by the counterdiffusion of cations and ction vacancies. For the reductio reaction pores are found to form at the site once occupied by the precipitates and at the surface. This observation illustrates that the oxygen volitalization from interior region to the surface is the dominant process for the reduction reaction.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.622-629
• /
• 2003

고성능 복합형 전자파 흡수체를 개발하기 위해 종래에는 지지재로서 주로 Silicone 고무나 CPE가 사용되어 왔다. 본 연구에서는 전통 공예에서 사용되어 오던 옻에 대한 전자파 흡수능을 조사하고 이를 지지재로 사용하여 MnZn 페라이트와 배합하여 전자파 흡수체를 제작한 경우의 전자파 흡수능을 조사하고, 흡수체의 두께에 따른 흡수능을 조사하였다. 옻을 지지재로 한 MnZn 페라이트 복합형 전자파 흡수체는 CPE나 Silicone 고무를 지지재로 한 전자파 흡수체에 비하여 우수한 전파흡수특성 나타내었으며, 옻의 두께 변화에 따라 정합주파수와 전파흡수능이 변화함을 알았다.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1224-1230
• /
• 2007

최근, 실내 무선 LAN은 편리함과 용도의 다양성으로 인해 가정이나 사무실 등에서 사용이 증대되고 있으며, IEEE 802.11a와 IEEE 802.11b에 명시되어 있는 바와 같이 5.2 GHz와 2.4 GHz의 주파수 대역을 사용하고 있다. 그러나 실내 공간에서 무선 LAN 기기들을 사용할 경우, 벽 천정 바닥 책상 등에 의해서 반사파가 발생하고, 이들 반사파의 다중 반사는 통신 속도 저하와 데이터 손실과 같은 문제점을 발생시킨다. 이러한 문제점은 전파 흡수체를 사용하여 해결하는 것이 가장 효과적이다. 따라서 본 논문에서는 MnZn-ferrite, sendust, carbon을 이용하여 전파 흡수체를 제작하였으며, 지지 재로는 CPE(Chlorinated Polyethylene)를 이용하였다. 제작된 전파 흡수체 측정 결과, 조성비가 MnZn-ferrite : sendust : CPE=64 : 16 : 20 wt.%일 때, 두께가 3.7 mm인 전파 흡수체가 2.4 GHz에서 17 dB의 전파 흡수 특성을 보였고, 조성비가 MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.%일 때, 두께가 3.8 mm인 전파 흡수체가 5.2 GHz에서 23 dB의 전파 흡수 특성을 보였다.