• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.575-578
• /
• 2004

The charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor surface was modified in order to improve discharging characteristic of green cell in an ac-plasma display panel (ac-PDP). The Zinc-silicate ($Zn_2SiO_4:Mn^{2+}$) green-emitting phosphor was coated with magnesium oxide(MgO), which is viable to have positive charge on the surface. After fabricating the green cell with MgO-coated $Zn_2SiO_4:Mn^{2+}$, the electrical and optical properties in the cell were examined. It was found that the dynamic voltage margin could be increased while the address time was reduced. It may be ascribed to the change of charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor by MgO coating, which makes it possible to stable wall-charge accumulation. When $Zn_2SiO_4:Mn^{2+}$ phosphor was coated with 1.3wt%-MgO, the address time was reduced 1.2 ${\mu}s$ and the address voltage lowered 25 V without any misfiring problem, compared to those of typical $Zn_2SiO_4:Mn^{2+}$ phosphor layer. The luminescence intensity of green cell using MgO-coated phosphor layer was also improved by 10%.

• 한국재료학회지
• /
• 제14권8호
• /
• pp.600-606
• /
• 2004

$Zn_{2}SiO_{4}:Mn$ phosphor particles were prepared by a flame spray pyrolysis method. It has been generally known that the high-temperature flame enables fast drying and decomposition of droplets. In the present investigation, the morphology and luminescent property of $Zn_{2}SiO_{4}:Mn$ phosphor were controlled in a severe flame preparation condition. The particle formation in the flame spray pyrolysis process was achieved by the droplet-to-particle conversion without any evaporation of precursors, which made it possible to obtain spherical $Zn_{2}SiO_{4}:Mn$ particles of a pure phase from a droplet. Using colloidal solutions wherein dispersed nano-sized silica particles were adopted as a silicon precursor. $Zn_{2}SiO_{4}:Mn$ particles with spherical shape and filled morphology were prepared and the spherical morphology was maintained even after the high-temperature heat treatment, which is necessary to increase the photoluminescence intensity. The $Zn_{2}SiO_{4}:Mn$ particles with spherical shape, which were prepared by the flame spray pyrolysis and posttreated at $1150^{\circ}C$, showed good luminescent characteristics under vacuum ultraviolet (VUV) excitation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.293-293
• /
• 2007

현재 활발하게 진행되고 있는 이차전지 양극 물질 중 저렴한 가격과 친환경성으로 각광받고 있는 $LiMn_2O_4$ spinel 산화물은 여러 장점에도 불구하고 용량 값이 기존 알려져 있던 Co-계 산화물에 비해 떨어지고 cycle 특성 역시 현저하게 이어진다. 이는 Mn이 전해액과의 반응에 있어 구조적인 안정성을 지니지 못하여 용출되어 나타나는 특성이다. 이번 연구에서는 Mn의 용출을 저지하고 용량의 향상을 이룰 수 있는 전이금속 중 Fe산화물을 치환하여 구조적 안정성을 갖도록 하였다. Fe산화물 치환을 통해 기본적 물성의 변화와 전기적 특성 변화를 측정하였고 공정에서의 온도 및 입도에 따른 영향도 확인하였다. Fe산화물은 Mn 자리의 3+와 4+의 자리에 치환되어 용량을 증대시키고 사이클 특성을 10회 기준으로 20%가량 향상시키는 효과를 가져왔다.

• 전기화학회지
• /
• 제3권3호
• /
• pp.131-135
• /
• 2000

[ $LiMn_2O_4$ ]박막전지의 충방전 사이클에 따른 용량 감소의 원인을 파악하기 위하여, $LiMn_2O_4/1M\;LiClO_4-PC/Li$전지를 구성하여 충방전 사이클에 따른 AC impedance분석을 수행하였다. 적절한 등가회로를 이용하여 비선형 최소자승 맞춤에서 얻은 값이 Impedance측정 결과와 잘 일치하였다. 충방전에 따른 정전용량은 초기의 급격한 감소를 보인 이후 완만한 감소를 보였다. 충방전 사이클이 초기 70-100사이클까지는 저항 성분 중 양극전해질 계면의 전하 전달저항 성분이 급격히 증가하다가 이후 안정된 값을 보임으로 초기 급격한 용량변화의 원인으로 파악되었다. 전하전달 저항이 안정된 이후에는 Warburg저항이 충방전에 따라 조금씩 증가하였으며, LiMn2O4박막의 화학확산 계수가 사이클에 따라 초기 $5.15\times10^{-11}cm^2/sec$에서 800사이클이 지난 후 $6.3\times10^{-12}cm^2/sec$로 점차 감소하는 것이 관찰되어 100사이클이 후의 용량감소의 지배적 원인으로 파악하였다. Warburg저항의 증가는 Jahn-Teller변형 또는 Mn용해에 의한 것으로 추정하였다.

• Corrosion Science and Technology
• /
• 제16권1호
• /
• pp.15-22
• /
• 2017

An oxidation-reduction scheme is an alternative approach for improving the galvanizability of advanced high-strength steel in the continuous hot-dip galvanizing process. Here, we investigated the effect of oxygen partial pressure ($P_{O_2}$) on the oxidation behavior of a transformation-induced plasticity steel containing 1.5 wt% Si and 1.6 wt% Mn during heating to and holding for 60 s at $700^{\circ}C$ under atmospheres with various $P_{O_2}$ values. Irrespective of $P_{O_2}$, a thin amorphous Si-rich layer of Si-Mn-O was formed underneath the Fe oxide scale (a $Fe_2O_3/Fe_3O_4$ bilayer) in the heating stage. In contrast to Si, Mn tended to segregate at the scale surface as $(Fe,Mn)_2O_3$. The multilayered structure of $(Fe,Mn)_2O_3/Fe_2O_3/Fe_3O_4$/amorphous Si-Mn-O remained even after extended oxidizing at $700^{\circ}C$ for 60 s. $Fe_2O_3$ was the dominantly growing oxide phase in the scale. The enhanced growth rate of $Fe_2O_3$ with increasing $P_{O_2}$ resulted in the formation of more Kirkendall voids in the amorphous Si-rich layer and a less Mn segregation at the scale surface. The mechanisms underlying the absence of FeO and the formation of Kirkendall voids are discussed.

• Transactions on Electrical and Electronic Materials
• /
• 제4권2호
• /
• pp.35-39
• /
• 2003

This paper is contents on the orthorhombic crystalline calcined by the solid phase method with LiMnO$_2$ thin film structured as the result which an average pore diameter of power was 132.3${\AA}$ in porosity analysis. Voltage ranges are able to get the properties of charge and discharge for experimental results of LiMnO$_2$ thin film were 2.2V 4.3V. The current density and scan speed were 0. 1㎃/$\textrm{cm}^2$ and 0.2㎷/sec respectively. Properties of the charge and discharge are obtained by optimum experiment condition parameters. Li dense ratio of the LiMnO$_2$ thin film that discharged capacities were 87㎃h/g have been 96.9［ppm］ at 670.784［nm］ wavelength. The dense ratio of Mn analyzed to 837［ppm］ at 257.610［nm］ wavelength. It can be estimated the quality of the LiMnO$_2$ thin film as that the wrong LiMnO$_2$ thin film pulled up from cell of electrolyte and became dry it at 800$^{\circ}C$. The results of SEM and XRD were the same as that of original researchers.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2683-2688
• /
• 2011

Silica-manganese oxides with a core-shell structure were synthesized via precipitation of manganese oxides on the $SiO_2$ core while varying the concentration of a precipitation agent. Elemental analysis, crystalline property investigation, and morphology observations using low- and high-resolution electron microscopes were applied to the synthesized silica-manganese oxides with the core-shell structure. As the concentration of the precipitating agent increased, the manganese oxide shells around the $SiO_2$ core sequentially appeared as $Mn_3O_4$ particles, $Mn_2O_3+Mn_3O_4$ thin layers, and ${\alpha}-MnO_2$ urchin-like phases. The prepared samples were assembled as electrodes in a supercapacitor with 0.1 M $Na_2SO_4$ electrolyte, and their electrochemical properties were examined using cyclic voltammetry and charge-discharge cycling. The maximum specific capacitance obtained was 197 F $g^{-1}$ for the $SiO_2-MnO_2$ electrode due to the higher electronic conductivity of the $MnO_2$ shell compared to those of the $Mn_2O_3$ and $Mn_3O_4$ phases.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.774-780
• /
• 2000

In order to improve luminescence prperty of phosphors, we have synthesized Zn2SiO4:Mn phosphors by a new chemical synthetic route, i.e., the homogeneous precipitation method. This method has featured that the formation of phosphoris completed at relatively low temperature of 105$0^{\circ}C$ and the particle morphology exhibits spherical shape to be well-dispersed and uniform size. At all the Mn concentration explored, phosphors prepared by this method have exhibited the improved emission intensities. In particular, the emission intensities of phosphors with Mn doping contents between 1 at% and 3.5 at% were higher about 40% than that of commercial phosphor. On the other hand, the decay time has been decreased from 23 ms to 11 ms with increasing Mn concentration. In addition, the phosphor composition containing 3 at% Mn has displayed the most saturated color.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.735-741
• /
• 2004

단순화한 연소법에 의해 합성한 $LiMn_{1.92}Co_{0.08}O_4$와 $LiNi_{0.7}Co_{0.3}O_2$의 혼합물의 전기화학적 성질을 알아보기 위하여, 30분 동안 milling하여 $LiMn_{1.92}Co_{0.08}O_4$-x wt$\%$ $LiNi_{0.7}Co_{0.3}O_2$ (x=9, 23, 33, 41, and 47) 조성의 혼합물을 제조하였다. x=9 조성의 전극이 비교적 큰 초기방전용량(109.9mAh/g at 0.1C)과 좋은 싸이클 성능을 가지고 있었다. 싸이클링에 따른 혼합물 전극의 방전용량 감소는 주로 $LiNi_{0.7}Co_{0.3}O_2$의 퇴화에 기인한다고 생각된다. $LiNi_{0.7}Co_{0.3}O_2$의 퇴화는 $LiMn_{1.92}Co_{0.08}O_4$로부터 용해된 Mn이 $LiNi_{0.7}Co_{0.3}O_2$ 입자를 둘러싸서(coating) 일어나는 것으로 판단된다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2000년도 추계총회 및 학술발표회
• /
• pp.37-37
• /
• 2000