• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.122-122
• /
• 2010

백색 유기발광소자를 제작하기 위한 여러 가지 유기물층을 사용할 때 제작공정이 어려워지고 유기발광소자의 발광 효율이 저하되고 색안정성이 나빠지는 문제점이 있다. 본 논문에서는 Zn2SiO4:Mn 무기물 형광체를 사용한 유무기 혼성 유기발광소자를 제작하고 발광 메카니즘을 조사하였다. 색변환층으로 사용되는 Zn2SiO4:Mn 형광체는 졸겔 방법을 사용하여 형성하고 비이클용액 및 열처리 공정을 사용하여 유리기판 위에 도포하였다. 형성된 Zn2SiO4:Mn 형광체 층에 대하여 X선 회절측정한 결과는 형광체내의 Zn 이온이 도핑된 Mn 이온에 대체되었음을 보여준다. 제작된 진청색 OLED의 전계발광 스펙트럼은 461 nm 에서 peak 을 나타내고 Zn2SiO4:Mn 무기물 형광체는 470 nm에서 여기 되어 Mn 이온의 4T1-6A1 전이에 의하여 527 nm에서 발광을 한다. Zn2SiO4:Mn 무기물 형광체를 사용한 유기발광소자의 전계발광스펙트럼에서 나타나는 527nm peak 은 Zn2SiO4:Mn 무기물의 색변환에 의해 나타난 결과로서 제작된 유기발광소자에서 발광된 빛을 청색에서 녹색으로 변환한 결과이다. Zn2SiO4:Mn 무기물 색변환층을 사용하여 제작된 무기물/유기물 유기발광소자의 발광 메카니즘은 전계발광스펙트럼 및 광루미네센스 스펙트럼 결과를 기초로 설명하였다. 이 결과는 녹색 무기물 형광체를 진청색 유기발광소자와 결합하여 제작된 유기발광소자의 발광색을 조절할 수 있음을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1740-1742
• /
• 2004

산소 과전압이 낮은 $MnO_2$를 촉매로 사용하여 반도체 산화물계의 산소선택성 전극을 제조하고 산화물 코팅층의 미세구조와 전기화학적 특성을 분석하였다. Ti 기판에 열분해 법을 이용하여 $MnO_2$ 피막을 형성하였고, 또한 binder를 이용한 코팅 방법을 이용하여 Ti, Fb 기판에 $MnO_2$ 피막층을 형성하였다. 450$^{\circ}C$에서 1시간 열분해하여 약 1 ${\mu}m$의 $MnO_2$ 피막층을 형성 시켰으나 Ti 기판과의 접착력이 약하여 피막자체에 대한 전기화학적 특성은 관찰할 수 없었다. PVDF : $MnO_2$의 함량비가 1:1에서 1:6 까지는 DMF의 함량에 무관하게 전극 특성이 나타나지 않았지만 20:1 이상의 조성에서는 균일한 C-V 특성을 나타냈고, 산소 발생 과전압도 약 1.4V 정도로 감소되었다. 그러나 Ti 기판의 경우 열분해법을 이용하여 제조된 전극과 같이 낮은 기판과의 접착력 때문에 $MnO_2$ 피막층의 촉매효과가 현저하게 감소하였다.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.406-410
• /
• 2020

Despite a simple preparation of manganese oxide (MnO₂) nanowires by electrodeposition, the improvement in specific capacitance (C_sp) and voltammetric response of the MnO₂ nanowire-based electrodes has been quite limited. This is attributed to the poor electrical conductivity of MnO₂ and its dense bulk morphology due to the aggregation of the nanowires. This study investigated the capacitive performance of MnO₂ nanowires electrodeposited on agarose thin films. The good ionic conductivity and porous network of the agarose film provided favorable growth conditions for the MnO₂ nanowires with suppressed aggregation. A maximum C_sp value of 686 F/g measured at a scan rate of 10 mV/s was obtained, which was significantly larger than that of 314 F/g for the agarose-free MnO₂ electrode at the same scan rate. The rate capability was also improved. The C_sp measured at a high scan rate of 100 mV/s retained 74.0% of the value measured at 10 mV/s, superior to the retention of 71.1% for the agarose-free MnO₂ electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.236-239
• /
• 2003

In this study, to develop the low temperature sintering ceramics for piezoelectric transformer, PSN-PNN-PZT system ceramics were manufactured as a function of $MnO_2$ addition. Its dielectric and piezoelectric characteristics were investigated. With increasing the amount of $MnO_2$ addition, electromechanical coupling factor(kp) were increased until 0.3wt% $MnO_2$ and that after decreased. mechanical quality factor(Qm) showed the maxinum value at 0.5wt% $MnO_2$. For piezoelectric transformer application, the 0.5wt% $MnO_2$ added specimen sintered at $1,000^{\circ}C$ showed the proper value of ${\varepsilon}r$= 1,646, kp=0.55 and Qm=439.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.595-596
• /
• 2005

This research which it sees adds $LiMn_2O_4$ in the activated carbon electrode the test against the effect which it follows is. Test cells, which were $LiMn_2O_4$fabricated with active mass composite consisted of (100-X)% of MSP-20 and (X)% of $LiMn_2O_4$ (X=20,40,60,80,100), exhibits the better specific capacitance than those of the cells fabricated with single active mass that is MSP-20. The enhanced properties of composite active mass could be caused by capability of $LiMn_2O_4$ powders. But the resistance was increase by proportionate in $LiMn_2O_4$ addition and when mixture ratio of the activated carbon and the $LiMn_2O_4$ being similar, to be low rather to the after where had become the maximum it came.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.161-164
• /
• 2001

In this paper, we investigated the dielectric and piezoelectric properties of Pb(Sb, Nb)O$_3$-Pb(Zr, Ti)O$_3$ ceramic(PSN) for piezoelectric transformer and actuator etc. Effect of MnO$_2$ addition on the PSN ceramic was investigated. Anisotropic properties of electromechanical coupling factor and piezoelectric properties proved to be varied with amount of MnO$_2$ impurity and sintering temperature. The electromechanical coupling factor k$_{p}$ of 0.38 and the mechanical quality factor Q$_{m}$ of 1944 were obtained from the specimen with 0.4 wt% MnO$_2$ sintered at 115$0^{\circ}C$ addition. Experimental results indicated that the PSN ceramic with MnO$_2$ impurity can be effectively used for piezoelectric transformer and actuator.tor.

• 대한전기학회논문지
• /
• 제44권11호
• /
• pp.1488-1493
• /
• 1995

In this study, the structural, electrical and dielectric properties were investigated in (P $b_{0.76}$ $Ca_{0.24}$)[( $Co_{1}$2/ $W_{1}$2/)$_{0.04}$ $Ti_{0.96}$) $O_{3}$ system ceramics which were manufactured with the addition of Mn $O_{2}$. According to the increment of Mn $O_{2}$ addition, tetragonality was decreased. The specimen added with 1.5 mol% Mn $O_{2}$ and sintered at 1150.deg. C showed the highest density of 7.06[g/c $m^{3}$]. The variations of grain xize as a function of Mn $O_{2}$ addition were negligibly small. But grain was grown until 7.88[.mu.m] with increasing sintering temperature. Electromechamical coupling factor planar mode $K_{p}$ was decreased to a small value of $K_{p}$ = 0 in all the specimens added with Mn $O_{2}$ and sintered at 1150.deg. C & 1200.deg. C.& 1200.deg. C.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.588-593
• /
• 2006

Spinel phase $LiMn_2O_4$ is of great interest as cathode materials for lithium-ion batteries. In this study, SHS (Self propagating High-temperature Synthesis) method to synthesize spinel $LiMn_2O_4$ directly from lithium nitrate, manganese oxide, manganese and sodium chloride were investigated. The influence of Li/Mn ratio, the heat-treated condition of product have been explored. The resultant $LiMn_2O_4$ synthesized under the optimum synthesis conditions shows perfect spinel structure, uniform particle size and excellent electrochemical performances.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.392-393
• /
• 2007

PDP용 녹색 $Zn_2SiO_4$:Mn 형광체의 발광특성과 결정성을 향상시키기 위해 co-dopant로 Mg를 첨가한 $(Zn_{1-x}Mg_x)_2SiO_4$:Mn 형광체를 합성하였다. 합성된 형광체의 발광특성을 PL로 조사한 결과, $Zn_2SiO_4$:Mn 형광체는 Mg의 농도에 관계없이 530nm에서 녹색 발광을 하였고, Mg의 농도가 0.5 mol%일 때 가장 높은 발광세기가 나타났다. 이것은 Zn과 이온반경이 비슷한 Mg가 치환되어 모체에서의 Mn으로의 에너지 전이가 증가하여 발광세기가 증가한 것으로 생각된다.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.378-384
• /
• 1995

Effects of $La_2O_3$, $MnO_2$ on the dielectric and piezoelectric properties of $0.02Pb(Y_{2/3}W_{1/3}O_3-0.98Pb(Zr_{0.52}Ti_{0.48})O_3$ system were investigated. The addition of La2O3 to the system enhanced electromechanical coupling factor (kp), piezoelectric constant (d33), but hardly changed mechanical quality factor (Qm). On the other hand, the addition of $MnO_2$ increased Qm significantly, but did not degrade kp and d33 so much. The piezoelectric properties of $0.02Pb(Y_{2/3}W_{1/3}O_3-0.98Pb(Zr_{0.52}Ti_{0.48})O_3$ containing 0.1wt% $La_2O_3$, 0.4wt% $MnO_2$ were very good and kp, d33, Qm were 55%, 350$\times$10-12C/N, 780, respectively. The size of the grains was proportional to the change of c/a (tetragonality) ratio caused by the addition of $La_2O_3$ and $MnO_2$, and dielectric, piezoelectric properties were sensitive to the amountof pyrochrole phase.