• 제목/요약/키워드: MnAl

검색결과 1,114건 처리시간 0.026초

La3+ doped (Ba1-x Cax) TiO3의 PTCR 특성에 미치는 첨가제의 영향 (Effect of Additives on the PTCR Characteristics of La3+ Doped(Ba1-xCax)TiO4 Ceramics)

  • 강원호;오봉인;김재현;이경희
    • 한국세라믹학회지
    • /
    • 제25권1호
    • /
    • pp.42-48
    • /
    • 1988
  • Commercially available PTCR (Postive Temperature Coefficient of Resistivity) ceramics which have low room temperature resistance, high PTC effect and temperature coefficient were prepared by La3+ doped semiconducting barium calcium titanate soild solutions. PTCR characteristics were remarkably improved by addition of AST (1/3 Al2O3$.$3/4SiO2$.$1/4TiO2) and MnCl2. That can be explained by formation of liquid phase during sintering and acceptor level on the intergranular layer. Resistivity anormaly increased with decreasing cooling rate. Optimum manufacturing conditions were cooling rate below 100$.$C/hr, Ca and Mn content of 4 mol% &, 0.09-0.12mol% respectively.

  • PDF

백색광을 발하는 면발광소자의 휘도 및 표면특성 (Luminance and Surface Properties of P-ELD Emitted White Light)

  • 박수길;조성렬;손원근;박대희;이주성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.403-406
    • /
    • 1998
  • Electroluminescence(EL) come from the light emission obtained by electrical excitation energy passing through a phosphor layer under applied high electrical field. The preparation and characterizations of light emitting ACPEL(alternating-current powder electroluminescent) cell based on two kinds of phosphor mixed ZnS:Mn, Cu and ZnS:Cu phosphor. Basic structure is ITO/Mixed Phosphor/insulator/Al sheet, each layer was mixed by binder, which concentration 11p for phosphor, 8p for insulator. Dielectric properties was investigated first and emission properties of P-LED based on ZnS:Mn,Cu/ZnS:Cu,Br mixture. Emission spectra exhibits two kinds of main peaks at 100V, 1kHz sinusoidal excitation.

  • PDF

촉매습식산화에 의한 Ethylene Glycol의 분해 (Decomposition of Ethylene Glycol by Catalytic Wet Air Oxidation)

  • 안상준;최장승;이동근
    • 한국염색가공학회지
    • /
    • 제13권4호
    • /
    • pp.264-271
    • /
    • 2001
  • Catalytic wet oxidation of ethylene glycol as refractory compound was studied in a batch slurry reactor using lwt% $Pt/A1_2O_3$, lwt% $Pt/TiO_2,\;Mn/CeO_2$(1:1) and 5wt% $Mn/Al_2O_3$. Experiments were conducted to investigate theeffects of temperature, initial ethylene glycol concentration, catalyst dosage and PH on the ethylene glycol decomposition. When compared with the uncatalyzed reaction, the use of catalysts could increase the rate of ethylene glycol decomposition. The lwt% $Pt/A1_2O_3$ catalyst was preferable to the other catalysts for the destructive oxidation of ethylene glycol. The reaction rate was first order with respect to initial concentration of ethylene glycol. In acidic condition the removal efficiency of ethylene glycol was good, but there was a significant leaching of platinum. Small amount of acetic acid, oxalic acid, masonic acid and formic acid as intermediates were detected during catalytic wet air oxidation of ethylene glycol.

  • PDF

석회 시용이 Burley종 담배의 수량과 화학성분에 미치는 영향 (Effect of Lime application on Yield and Chemical composition of Burley tobacco (Nicotiana tabacum L.) in pot experiment.)

  • 김용옥;최정
    • 한국연초학회지
    • /
    • 제10권2호
    • /
    • pp.99-107
    • /
    • 1988
  • Pot experiment was conducted to find out the effect of lime application on yield and chemical composition of burley tobacco in 1986, Lime increased exchangeable calcium and pH of soil, but decreased Al, Fe and Mn concentrations. Yield was increased by lime application, however lime could not be caused to yield increasing in the soil with high calcium contents. Cored leaves of limed Plot contained higher Mg. K, total nitrogen, NO3-nitrogen, water soluble and insoluble ash, alkalinity number of water soluble and insoluble ash, citric and malic acid, but lower Fe, Mn, protein-nitrogen, NH3-nitrogen, nicotine petroleum ether extract, palmitic and linolenic acid concentrations than those of unlined plot. The linoleic acid and volatile neutral constituents of cured leaves were not affected by liming. Lime increased yield, however it did not affect leaf duality in respect to chemical characteristics, suggesting that liming should be necessary for tobacco cultivation.

  • PDF

울산(蔚山) 공단주변(工團周邊) 산림토양(山林土壤)의 산성화(酸性化)가 산림생태계(山林生態系)의 양료(養料)와 중금속(重金屬) 분포(分布)에 미치는 영향(影響) (The Effect of Soil Acidification on the Distribution of Nutrients and Heavy metals in Forest Ecosystem near Ulsan Industrial Estate)

  • 이승우;이수욱
    • 한국산림과학회지
    • /
    • 제84권3호
    • /
    • pp.286-298
    • /
    • 1995
  • 본 연구는 산림토양(山林土壤)의 산성화(酸性化)가 토양내 치환성 양이온($Ca^{2+}$, $Mg^{2+}$, $Al^{3+}$) 및 중금속(Cu, Zn, Mn, Pb, Cd) 분포(分布)에 미치는 영향을 평가하고, 이러한 토양내 화학적 특성과 임목의 세근과 엽내 양료 및 중금속 분포와의 관계(關係)를 파악하기 위하여 수행되었다. 이를 위하여 울산(蔚山)과 온산공단(溫山工團) 주변의 6개 조사구와 개발제한지역내(開發制限地域內) 2개 조사구를 대상으로 토양 pH의 장기적(長期的) 변화(變化)와 토양(土壤), 세근(細根) 및 엽(葉)내 양료(養料)와 중금속(重金屬) 함량(含量)을 조사한 결과는 다음과 같다. 1. 울산지역 산림의 토양 pH(A층)는 1987년에 활엽수림(闊葉樹林)과 침엽수림(針葉樹林)에서 각각 4.45와 4.78이었던 것이 1994년에는 각각 3.73과 3.86으로 감소하여 토양산성화(土壤酸性化)의 정도가 심화되었다. 1994 년 현재 개발제한지역내 침엽수림인 동천이 4.57로 가장 높은 반면 온산공단에 인접한 당월의 활엽수림이 3.19로 가장 낮았다. 2. 공단지역(工團地域)에 비해 토양 pH가 높았던 개발제한지역 산림의 토양내 치환성(置換性) $Ca^{2+}$함량은 공단지역보다 활엽수림에서 3.5배, 침엽수림에서 11배나 높았고, 치환성(置換性) $Mg^{2+}$ 함량 또한 각각 4.5배와 5배나 높았다. 그러나 공단지역에서 높을 것으로 예상되었던 치환성(置換性) $Al^{3+}$함량은 오히려 개발제한지역에서 높게 나타났다. 3. 세근내(細根內) Ca과 Mg 함량은 개발제한지역이 공단지역보다 활엽수(물오리나무, 상수리나무)의 경우 각각 3.6배와 1.7배 높았고 침엽수(리기다소나무, 곰솔)에서는 각각 4.6배와 1.5배 높았다. 엽(葉)에 있어서도 개발제한지역 산림의 활엽수가 공단지역보다 각각 1.1배와 2.2배 높았고, 침엽수는 각각 1.8배와 2.3배나 높았다. 그리고 세근과 엽내 Al 함량 역시 토양에서와 같은 경향을 보였다. 4. 토양산성화도(土壤酸性化度)와 임목(林木)에 대한 Al 독성(毒性)을 평가하기 위한 토양과 세근내 Ca/Al 몰비가 동천을 제외한 오든 조사구의 토양과 세근에서 1 이하로써 토양산성화에 민감할 뿐만 아니라 양료흡수(養料吸收) 및 근계발달(根系發達)의 피해(被害)가 예상되었다. 침엽수림(針藥樹林)의 경우 토양 pH와 토양 및 세근내 Ca/Al 몰비간에 서로 고도(高度)의 상관(相關)을 보였다. 5. 토양, 세근 및 엽내 Cu, Zn, Pb 함량은 활 침엽수림 모두에서 공단지역(工團地域)이 개발제한지역(開發制限地域)보다 전체적으로 높았지만, 토양중 Mn과 Cd 함량은 반대로 개발제한지역이 더 높았다.

  • PDF

알루미늄 합금의 레이저 용접시 유기하는 플라즈마의 스펙트럼 분석 (Spectral Analyses of Plasma Induced by Laser Welding of Aluminum Alloys)

  • 김종도;최영국;김영식
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2001년도 추계학술대회 논문집
    • /
    • pp.292-300
    • /
    • 2001
  • The paper describes spectroscopic characteristics of plasma induces in the pulsed YAG laser welding of alloys containing a large amount of volatile elements. The authors have conducted the spectroscopic analyses of laser induced Al-Mg alloys plasma in the air and argon atmosphere. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg lines, as well as the intense molecular spectra of A10 and Mg0 formed by chemical reactions of evaporated Al and Mg atoms from the pool surface with oxygen in the air. In argon atmosphere, Mg0 and AI0 spectra vanished, but AIH spectrum was detected. The hydrogen source was presumably hydrogen dissolved in the base metals, water absorbed on the surface oxide layer, or $H_2$ and $H_2O$ in the shielding gas. The resonant 1ines of Al and Mg were strongly self-absorbed, in particular, self-absorption of the Mg 1ine was predominant. These results show that the laser induced plasma was made of metal1ic vapor with relatively low temperature and high density.

  • PDF

BaTiO$_3$ 세라믹스의 전기저항에 미치는 첨가제와 냉각속도의 영향(I) - TiO$_2$, SiO$_2$ 및 Al2O$_3$ 단미첨가 - (Effect of Additives and Cooling Rates on the Electrical Resistivity of BaTiO3 Ceramics (I))

  • 염희남;하명수;이재춘;정윤중
    • 한국세라믹학회지
    • /
    • 제28권9호
    • /
    • pp.661-666
    • /
    • 1991
  • Microstructure, room temperature resistivity and temperature coefficient of resistance of BaTiO3 ceramics were studied by varying cooling rates and additives such as TiO2, SiO2 and Al2O3. The basic composition of the BaTiO3 ceramics was formed by adding 0.25 mol% Dy2O3 and 0.07 mol% MnO2 to the BaTiO3 composition. Unlike the additives of SiO2 and Al2O3, an addition of 2 mol% TiO2 to the basic composition was effective to control the grain size of the fired specimens. The room temperature resistivity and the temperature coefficient of resistance for the specimen of this particular compostion were measured as about 102 ohm.cm and 16.5%/$^{\circ}C$, respectively. The observed grain boundary phase of the sample with Al2O3 additive was BaTi3O7, while that of the samples with SiO2 additive was confirmed as BaTiSiO5.

  • PDF

재활용 산화철 및 알루미늄 분말을 활용한 철도레일 이음용 테르밋 분말 개발 (Development of Thermite Powder for Rail Joining with Recycled Iron Oxide and Aluminium Powder)

  • 최상규;박성상;백응률
    • Journal of Welding and Joining
    • /
    • 제30권5호
    • /
    • pp.40-45
    • /
    • 2012
  • Nowadays in Republic of Korea, whole amount of the thermite welding powder for rail joinning is dependent on import. However the demand of the thermite welding powder would be enlarge because some constructing high-speed train and city metro projects are currently in progress. In addition this is the main reason why we should develop the thermite welding powder, domestically. This study is focused on utilizing the recyclable materials like Al powders from cans and iron oxide scales from wire rods as the main components of the thermite welding powder. By minimizing Al content in weld zone by controlling the mixing ratio of the Al powder in the thermite welding powder, the excessive dissolution of the Si and Mn components came from the Al powders could be controled. The tensile strength of welding zone in welded rail was 740 MPa, with that the developed thermite welding powder.

The corrosion of aluminium alloy and release of intermetallic particles in nuclear reactor emergency core coolant: Implications for clogging of sump strainers

  • Huang, Junlin;Lister, Derek;Uchida, Shunsuke;Liu, Lihui
    • Nuclear Engineering and Technology
    • /
    • 제51권5호
    • /
    • pp.1345-1354
    • /
    • 2019
  • Clogging of sump strainers that filter the recirculation water in containment after a loss-of-coolant accident (LOCA) seriously impedes the continued cooling of nuclear reactor cores. In experiments examining the corrosion of aluminium alloy 6061, a common material in containment equipment, in borated solutions simulating the water chemistry of sump water after a LOCA, we found that Fe-bearing intermetallic particles, which were initially buried in the Al matrix, were progressively exposed as corrosion continued. Their cathodic nature $vis-{\grave{a}}-vis$ the Al matrix provoked continuous trenching around them until they were finally released into the test solution. Such particles released from Al alloy components in a reactor containment after a LOCA will be transported to the sump entrance with the recirculation flow and trapped by the debris bed that typically forms on the strainer surface, potentially aggravating strainer clogging. These Fe-bearing intermetallic particles, many of which had a rod or thin strip-like geometry, were identified to be mainly the cubic phase ${\alpha}_c-Al(Fe,Mn)Si$ with an average size of about $2.15{\mu}m$; 11.5 g of particles with a volume of about $3.2cm^3$ would be released with the dissolution of every 1 kg 6061 aluminium alloy.

Synthesis, characterization, and biological significance of mixed ligand Schiff base and alizarin dye-metal complexes

  • Laith Jumaah Al-Gburi;Taghreed H. Al-Noor
    • 분석과학
    • /
    • 제37권4호
    • /
    • pp.239-250
    • /
    • 2024
  • This study reports the synthesis of a bi-dentate Schiff base ligand (L), 7-(2-((2-formylbenzylidene) amino)-2-phenylacetamido)-3-methyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, prepared from phthalaldehyde and cephalexin antibiotic. The synthesized Schiff base ligand (L) and the secondary ligand alizarin (Az) are used to prepare the new complexes [M(Az)2(L)] and [Cr(Az)2(L)]Cl, where M = Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The mode of bonding of the Schiff base has been characterized by UV-Visible, FT-IR, Mass, 1H-, and 13C-NMR spectroscopic techniques, and micro elemental analysis (CHNS). The complexes were characterized using UV-Vis, FT-IR, molar conductance, magnetic moment, and thermal analysis (TG/DTG). The molar conductance data revealed that the complexes are non-electrolytes except for [Cr(L)(Az)2]Cl, which is an electrolytic type 1:1. The Schiff base and its complexes have been tested for their biological activity against two strains of bacteria and one fungus. When screened against gram-positive and gram-negative pathogens, the Az and L ligands and their complexes showed potential antimicrobial activity.