• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.11a
• /
• pp.17-17
• /
• 2016

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.2
• /
• pp.59-64
• /
• 2014

Cu-Al-Mn shape memory alloys of a variety of composition were characterized in terms of shape memory properties and cold workability. Cold workability tested by cold rolling indicated that the alloys solution treated in the ${\alpha}+{\beta}$ region have a higher ductility than those solution treated in the ${\beta}$ region. Also it is known that cold workability increased with the decrease in Al content in the ${\beta}$ region. This seems to be resulted from the fact that Mn addition causes to expand ${\beta}$ region toward lower Al content and lower order-disorder transition temperature, consequently, ${\beta}$ of excellent workability being frozen even at room temperature. Experimental results regarding shape memory showed that the properties were better with a higher Al contents at a given Mn content, which is closely related with martensitic transformation. It is also shown that super elasticity limit was enhanced with decrease in the yield strength of alloys because a lower yield strength seems to initiates slip at the lower applied stress.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.231-243
• /
• 2004

Sequential extraction was carried out on twenty two subsamples of three ferromanganese crusts from three seamounts (Lemkein, Lomilik, and Litakpooki) near the Marshall Islands in the western Pacific. The extraction was designed to fractionate Fe-Mn crust forming elements into low defined groups: (1) exchangeable and carbornate, (2) Mn-oxide, (3) Fe-oxyhyd.oxide, and (4) residual fraction. X-ray diffraction result shows that target material were well removed by each extraction step except for CFA in phosphatized crusts generation. According to chemical analysis of each leachate, most of elements in the Fe-Mn crusts are bound with two major phases. Mn, Ba, Co, Ni, Zn, (Fe, Sr, Cu, and V) are strongly bounded with Mn-oxide $({\delta}-MnO_2)$ phase, whereas Fe, Ti, Zr, Mo, Pb, Al, Cu,(V, P, and Zn) show chemical affinity with Fe-oxyhydroxide phase. This result indicates that significant amount of Al, Ti, and Zr can not be explained by detrital origin. Ca, Mg, K, and Sr mainly occur as exchangeable elements and/or carbonate phase. Outermost layer 1 and inner layer 2 which are both young crusts generations are similar in chemical speciations of elements. However, some of Fe-oxyhydroxide bounded elements (Pb, Y, Mo, Ba, Al, and V) in phosphatized innermost layer 3 are released during phosphatization and incorporated into phosphate (Pb, Y, Mo, and Ba) or Mn-oxide phase (Al and V). Our sequential extraction results reveal that chemical speciations of elements in the hydrogenetic crusts are more or less different from interelemental relationship calculated by statistical method based on bulk chemistry.

• Resources Recycling
• /
• v.21 no.3
• /
• pp.21-27
• /
• 2012

In order to make high-purity ferro-manganese from $Mn_3O_4$ dust, the application of aluminothermy process to the reduction of $Mn_3O_4$ dust was investigated in previous work. The result showed the fact that can be obtained high purity ferro-manganese which have over about 93% of manganese content and lower impurities such as C, P, S than those of KS D3712 specification. The addition of silicon powder instead of aluminum powder was investigated as reductant in the thermite reaction process of $Mn_3O_4$ dust in this work because its production cost is lower than that of aluminum powder. In case of addition of silicon powder only as reductant, the experimental result showed the unstable ignition and no thermite reaction of mixture, but in case of simultaneous addition of silicon and aluminum powders as reductant, showed the fact that can be obtained high purity ferro-manganese which have much low content of impurities such as C, P, S component.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.71-76
• /
• 1992

Piezoceramic filters were fabricated by adding $MnO_2 and FeZ0_3$ to the $0.05Pb(Al_{2/3}W_{1/3})O_3-0.95Pb(Zr_{0.52}Ti0.48)O_3$ system using photolithography method. As the amounts of $MnO_2$ increased, the electro-mechanical coupling factor(Kp) decresed. On the other hand, for $Fe_2O_3$ added samples, Kp was 57%, but mechanical quality factor(Qm) showed relatively low value. The passband widths were 155kHz for 0.3wt % $MnO_2$ addition and 260kHz for 0.1 wt % $Fe_2O_3$ addition, and were inversely propotional to Qm values. Group delay time characteristics showed Gausian for $MnO_2$ additions and Butterworth for$Fe_2O_3$ additions.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.431-437
• /
• 2019

This work was carried out ozone generation and TCE decomposition characteristics using dielectric ball materials filled barrier discharge reactor and catalyst's reactor for ozone decomposition. Ozone concentration generated from $Al_2O_3$ or $TiO_2$ filled barrier discharge reactor was so high compared with non-filled discharge reactor. This reactor is good discharge structure for generating the high ozone concentration. In addition, TCE decomposition rate and COx conversion rate increased using $MnO_2$ filled discharge reactor, because ozone was decomposed at the same discharge space on the surface of $MnO_2$ catalysts. To identify the $MnO_2$ catalytic effects, TCE decomposition rate reached to 100[%] by the decomposition of ozone at $MnO_2$ catalyst's reactor by the arrangement of $Al_2O_3$ filled discharge reactor and $MnO_2$ catalyst reactor. Finally, $MnO_2$ catalyst is good materials for the decomposition of ozone and this process will be useful for decomposing VOCs such as TCE.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.85-92
• /
• 2008

This study was carried out to estimate heavy metal loads at plain area of the rural watersheds during farming season in 2006. The experimental area was belonging to Geum River watershed. That was located at the center of South Korea. Water samples were corrected at two kinds of aspects. One is regular sampling(every two month) and the other is irregular sampling(every rainfall event). The result showed that heavy metal properties of regular samples were highest at May and June with lively agricultural activities. Heavy metal concentration of irregular samples was lower than that of regular samples. But the heavy metal loads of irregular samples were high. The correlation between each heavy metals of regular samples was following as Mn-Cd > Mn-Fe > Mn-Al > Fe-Al > Al-Cd. The correlation of irregular samples was following as Fe-AI > Zn-Mn > Fe-Cd > Cd-Al. Loading rates of daily discharge the plain area of designed rural watershed during farming season were Al 3.070 kg/day, Cu 0.526 kg/day, Fe 0.745 kg/day, Zn 0.314 kg/day, Cd 0.010 kg/day, Cr 0.055 kg/day, Mn 0.140 kg/day and Pb 0.098 kg/day. Loading rate of discharge with heavy metals during the survey period was Al(577.23 kg) > Fe(140.08 kg) > Cu(98.93 kg) > Zn(58.99 kg) > Mn(26.34 kg) > Pb(18.51 kg) > Cr(10.34 kg) > Cd(1.93 kg).

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.125-134
• /
• 2007

This study has been carried out in order to examine the precipitation characteristics of Fe, Mn and Al ions in coal mine drainage before removing heavy metals by using the froth flotation method. The removal rate of Fe(III), Mn(II) and Al(III) within 1 h accounted for over 99% in pH 5.0, 10.0, and $6.0{\sim}9.0$ respectively, and residual concentrations of which were under $1mgL^{-1}$. When sodium oleate as a collector was added to the solution of Fe, Mn, and Al ions, insoluble salts was not formed by the reaction of heavy metal and sodium oleate. So, we must remove the metals from coal mine drainage by using not the ion flotation method, but the precipitation flotation method

• Applied Microscopy
• /
• v.45 no.1
• /
• pp.9-15
• /
• 2015

In the present study, microstructural evolution in CuCrFeNi, CuCrFeNiMn, and CuCrFeNiMnAl alloys has been investigated. The as-cast CuCrFeNi alloy consists of a single fcc phase with the lattice parameter of 0.358 nm, while the as-cast CuCrFeNiMn alloy consists of (bcc+fcc1+fcc2) phases with lattice parameters of 0.287 nm, 0.366 nm, and 0.361 nm. The heat treatment of the cast CuCrFeNiMn alloy results in the different type of microstructure depending on the heat treatment temperature. At $900^{\circ}C$ a new thermodynamically stable phase appears instead of the bcc solid solution phase, while at $1,000^{\circ}C$, the heat treated microstructure is almost same as that in the as-cast state. The addition of Al in CuCrFeNiMn alloy changes the constituent phases from (fcc1+fcc2+bcc) to (bcc1+bcc2).

• Journal of Magnetics
• /
• v.10 no.3
• /
• pp.99-102
• /
• 2005

Modification in exchange bias of a NiFe/FeMn/NiFe trilayer, on introduction of a nonmagnetic Al layer at the top FeMn/NiFe interface, is investigated in multilayers prepared by rf magnetron sputtering. The introduction of Al layer leads to vanishing of bias of the top NiFe layer. But the bias for the bottom NiFe layer increases steadily with increasing Al layer thickness and attains bias (230 Oe) which is greater than that of the trilayer without the Al layer (150 Oe). When the top NiFe layer thickness is varied, exchange bias has highest value at 12 nm thickness for 1 nm thicknes of Al layer. Ion beam etching of the top NiFe layer also leads to an enhancement in bias for the bottom NiFe layer.