• 한국재료학회지
• /
• 제13권7호
• /
• pp.447-452
• /
• 2003

Effects of annealing and thickness of Co layer in Co/IrMn bilayers on the magnetic properties have been investigated. The highest interfacial exchange coupling energy($J_{K}$ = 0.12 erg/$\textrm{cm}^2$) was obtained for 10 nm Co layer thickness. Exchange bias field is inversely proportional to the magnetization, the thickness of the pinned layer, and the grain size of antiferromagnetic layer. Also it is related to the interfacial exchange energy difference, which is expected to depend on the surface roughness. These results almost agree with the random-field model of exchange anisotropy proposed by Malozemoff. Exchange bias field decreased slowly with increasing annealing temperature up to X$300^{\circ}C$. However, exchange bias field increased above $300^{\circ}C$.

• 한국환경과학회지
• /
• 제10권1호
• /
• pp.79-84
• /
• 2001

To assess resistance of transgenic tobacco plants which overexpress superoxide dismutase (SOD) and ascorbate peroxidase (APX) in chloroplasts to water stress, changes in leaf water potential, turgor potential, stomatal conductance and transpiration rate were measured. Leaf water potential in all plants remained high up to day 4 after withholding water but thereafter decreased markedly. In spite of a remarkable decrease in leaf water potential, some of transgenic plants maintained higher turgor potential compared with control plant on day 12. In particular, the transgenic plant expressing MnSOD showed an outstanding maintenance in turgor pressure by osmotic adjustment throughout the experiment, resulting in high stomatal conductance and transpiration rate. However, among transgenic plants, osmotic potential was reduced more effectively in multiple transformants such as the double transformant expressing both MnSOD and APX, and the triple transformant expressing CuznSOD, MnSOD and APX than single transformants. Consequently, further research is needed to get general agreement on the tolerance of transgenic plants to water stress at different growth stages for each transgenic plant.

• 한국수소및신에너지학회논문집
• /
• 제8권1호
• /
• pp.11-21
• /
• 1997

$ZrV_{0.7}Mn_{0.5}Ni_{1.2}$ alloy is attractive for anode material in Ni/MH secondary battery because of its large hydrogen storage capacity in gas-solid reaction and long cycling durability in KOH electrolyte. In this work, in order to further improve the discharge performance of this alloy electrode, the alloy was annealed by optimal condition which is for 12 hours at $1000^{\circ}C$. The alloy annealed under optimal condition had higher rate capability and discharge capacity than as-cast one. The microstructure of the as-cast and annealed alloy was investigated by scanning electron microscopy and energy dispersive spectroscopy. Ni content in the matrix was increased, being this homogenized after annealing. Additionally, The measurement of the surface area by B.E.T. analysis showed that there was little difference as-cast and annealed alloy. Therefore, improvement in the rate capability of the annealed alloy is due to increase of Ni content in the matrix.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.15-20
• /
• 1986

Formation of powders and electromechanical coupling factor of $Pb(Mn_{1/3} Sb_{2/3})_{0.08} Ti_{0.495}Zr_{0.425}O_3$ by hydro-thermal synthesis are described. The hydrothermal reactions each were accomplished at 12$0^{\circ}C$~25$0^{\circ}C$ for 5hours and sintering was accomplished at 1, .20$0^{\circ}C$ for 1hours. The PZT powders by hydrothermal synthesis were formed above 16$0^{\circ}C$ and the forms were cubic types. The ratio of grain size of sintered sample to powder was slowly decreased with the rising of hydrothermal reactino temperature but decreased rapidly above 22$0^{\circ}C$ Sintering density was decreased with the rising of hydrothermal reaction temperature above 16$0^{\circ}C$ but dielectric constant was increased. Electromechanical coupling factor $K_P$ was almost constant at 16$0^{\circ}C$~24$0^{\circ}C$ range and the value of $K_P$ was about 0.43-0.45.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.60-66
• /
• 1986

The effect of composition size of sintered body and electrode on resonant characteristics of the system $Pb(Mn_{1/3}Nb_{2/3})O_3 PbTiO_3-PbZrO_3$ has been decribed. Composition ranged from X=40 to X=55 diameter of sintered body ranged from D=6.5 to D=12.5(mm) and diameter of electrode ranged from De=5.5 to De=11 (mm) In the composition of morphotropic phase boundary antiresonant frequency (fa) dcreased slowly whereas resonant frequency (fr) decreased rapidly on the ground of this Δf(fa-fr) and electromechanical coupling fractor Kp increased and Qm showed low value. On the contrary in toward the composition of tetragonal and rhombo-hedral fa increased slowly whereas fr increased rapidly on the ground of this Δf and Kp decreased and Qm increased abruptly. Substance of the above statements have no concern with size of sintered body and ele-ctrode. The other side as the size of electrode decreased Qm fr, fa and Δf increased. Cm and Co dominantly affect the resonant frequency and antiresonant frequency.

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.717-723
• /
• 1998

The concentrations and wet deposition flux into the sea of heavy metals of precipitation in Pusan area were measured and estimated. The samples were collected by polyethylene bottle(30ι) from January to November in 1996, and heavy metals were analyzed by atomic absorption spectrometer. The concentration order of heavy metals was Al ＞Fe ＞Zn ＞Pb ＞Mn ＞Cu ＞Ni ＞Cd ＞Co, and they were high at inland sites and low at coastal sites. The enrichment factors for some metals(Zn, Cu, Pb, Cd), based on crustal Al, were significantly greater than unity, and the order was Cd ＞ Pb ＞ Zn ＞ Cu. This evidence suggests Cd and Pb are derived predominantly from non-crustal sources. Al, Fe and Mn contents showed good correlation with each other. Therefore this enrichment factor indicates similar geochemical behavior of these elements. The annual wet depositional flux(mg/ $m^2$ /yr) from Pl site was as follows: Al(121.1). Fe,(177.2), Zn(12.9), Mn(6.19), Pb(14.4), Cu(0.64), Ni(1.03), Cd(1.02) and Co(1.01).

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2006년도 추계 학술발표회 발표논문집
• /
• pp.323-327
• /
• 2006

전류밀도를 $1.0\;A/dm^2{\ell}$로 고정시키고, 촉매로 사용된 소금의 농도를 전체 폐수량의 약 15%로 조절하여 접촉시간을 $0\;{\sim}\;120$ 분으로 조절하여 각각의 시간에서 $COD_{Mn}$ 농도 약 70mg/L의 합성폐수를 전기분해 처리하여 접촉시간 약 30분에서 약 25 mg/L로 제거 되었으며, 60분이 지난 후부터 약 12 mg/L로 제거되는 것을 확인 할 수 있었다. 접촉시간을 1 시간으로 고정시키고, 촉매로 사용된 소금의 농도를 전체 폐수량의 약 15%로 조절하여 전류밀도를 $0\;{\sim}\;2.0\;A/dm^2{\ell}$로 조절하여 각각의 전류밀도에서 $COD_{Mn}$의 농도변화 실험결과 전류밀도 약 1.0 $A/dm^2{\ell}$에서 약 9 mg/L로 제거가 가능한 것으로 조사 되었다. 접촉시간을 1 시간, 전류밀도를 $1.0A/dm^2{\ell}$로 고정시키고 사용된 소금의 농도를 전체 폐수량의 $0\;{\sim}\;30\;%$로 조절하여 각각의 촉매 첨가율에서 $COD_{Mn}$의 농도변화를 조사결과 촉매 첨가율 30 %에서 가장 높은 처리효율을 나타내었으며, 촉매의 첨가에 의한 전기분해 효율뿐만이 아니라 직류전원공급기에 전기적 부하 또한 감소되는 것을 확인 할 수 있었다.

• Nutrition Research and Practice
• /
• 제8권4호
• /
• pp.439-444
• /
• 2014

BACKGROUND/OBJECTIVES: Korean ordinary diets are referred to be good for human health in worldwide. However it is uncertain whether they provide microminerals enough for growth and health of teenagers. A main purpose of this study was to identify micromineral contents in school meals. MATERIALS/METHODS: The fifty cuisines were collected from elementary schools and middle schools in Gyeongnam area. The contents of Fe, Zn, Cu and Mn among microminerals were analyzed by using ICP-OES method. Data were expressed as mean, standard deviation and range value and linear regression analysis performed. RESULTS: Fe level of Pangibuseotpaprika-salad was the highest among side-dishes (average $346.6{\mu}g$) and Zn level of Sullung-tang was highest among soups (average $229.1{\mu}g$). Cu level of Buchu-kimchi was the highest among kimchies (average $217.5{\mu}g$) and Mn level of Gumeunkongyangnyum-gui was highest among side-dishes (average $198.4{\mu}g$). Generally cooked-rices as main dish had relative smaller amounts of microminerals than the other cuisines. The results showed that the ratio of Cu : Fe : Zn was approximately 12 : 4 : 1 and the relationship between Fe versus Zn or Fe versus Cu was significantly positive. CONCLUSION: Comparing to Korean Dietary Recommended Intakes (KDRI) level, school meals provided not sufficient amount (<25% DRI) of Fe, Zn or Mn, while they did excessive amount (>125% DRI) of Cu.

• 열처리공학회지
• /
• 제12권2호
• /
• pp.99-107
• /
• 1999

The graphitization is affected by the addition of small amount of the elements(such as Si, Al, Ni, B, Cr and Mn etc.) and the pre-treatment(such as cold rolling). Boron is well known element to accelerate the graphitization of cementite in high carbon steels. Also, cold rolling is known to accelerate the graphitization. But the graphitization nucleation mechanism by cold rolling is few reported. Therefore the effect of cold rolling in Fe-0.5%C-1.0%Si-0.47%Mn-0.005%B steel on the graphitization is investigated quantitatively using hardness test, optical microscope and scanning electron microscope, neutron induced microscopic radiography. The nucleation of graphite in cold-rolled Fe-0.5%C-1.0%Si-0.47%Mn-0.005%B steel is formed at void which is formed at pearlite/pearlite boundary by cold rolling. But the effect of cold rolling on graphitization in boron addition steel is more effective than that of no boron addition steel due to segregation of BN at void in boron addition steel.

• 한국주조공학회지
• /
• 제30권6호
• /
• pp.235-240
• /
• 2010

The evolution of microstructure and phases of Mg-10Al-Mn alloy by cooling plate method during homogenization treatment have been investigated with metallographic analysis, scanning electron microscopy and energy dispersive spectroscopy. The ingots used for this experiment were prepared by cooling plate and homogenization heat treatment was performed at 300 and $400^{\circ}C$ for various holding times (0, 1, 4, 8 and 12h). The casting ingots were consisted of the fine grains and eutectic phases. And, these eutectic phases were dissolved into the matrix during homogenization treatment at $400^{\circ}C$ but the lower temperature (at $300^{\circ}C$) did not be.