• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.52-53
• /
• 1991

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.42-42
• /
• 1999

• Korean Journal of Crystallography
• /
• v.1 no.2
• /
• pp.126-131
• /
• 1990

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.34-34
• /
• 1994

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.25-33
• /
• 1993

Formation reaction of Mn-Zn ferrite depending on various synthetic conditions of wet process was investigated using FeCl2.nH2O(n≒4), MnCl2.4H2O, ZnCl2 as starting materials. A stable intermediate precipitate was formed by the addition of H2O2. And the precipitate was hard to transform to spinel phase of Mn-Zn Fe2O4. Single phase of Mn-Zn Fe2O4 spinel was obtained above 8$0^{\circ}C$ reaction temperature. The powder had spherical particle shape and 0.02~0.05${\mu}{\textrm}{m}$ particle size. Fe(OH)2 solid solution, -FeO(OH) solid solution, -FeOOH, Mn-Zn Fe2O4 spinel were formed with air flow rate 180$\ell$/hr. However, single phase of Mn-Zn Fe2O4 spinel with cubic particle shape and 0.1~0.2${\mu}{\textrm}{m}$ particle size was formed with synthetic conditions of 8$0^{\circ}C$ and 90 munutes. The particle shape of the -FeOOH was needle-like.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.290-295
• /
• 2003

In this study, we investigated the effect of particle size of Mn-Zn ferrite which is used as a material of electromagnetic wave absorber on electromagnetic wave properties. With increasing the particle size, the matching frequency is shifted toward lower frequency and the absorption ability of electromagnetic wave is decreased. We suggest that a sheet-type ferrite absorber composed of Mn-Zn ferrite with large particle is useful to compare with it composed of small particle size for mobile phone.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.226-231
• /
• 2001

The effect of interface reaction between Mn-Zn ferrite single crystal and 61 SiO$_2$-23Pbo-6ZnO-8Na$_2$O-2K$_2$O (mol%) glass on the magnetic properties of the ferrite was investigated. After the reaction, the hump of Zn concentration appeared at the ferrite adjacent to the interface. The initial permeability of the ferrite bonded with the glass at 700 $^{\circ}C$ was 1766 at 100 KHz and reduced to 907 after reaction at 1000$^{\circ}C$. The permeability degradation with increasing reaction temperature was considered to be attributed not only to the sixe diminution of the ferrite due to the its dissolution into the glass but also to the residual stress due to the difference in expansion coefficient between the ferrite and the diffusion layer-the region of the hump of Zn concentration-adjacent to the interface.

• Journal of the Korean Ceramic Society
• /
• v.30 no.6
• /
• pp.478-484
• /
• 1993

The influence of reaction conditions on the MnZn ferrite coprecipitation process were investigated using mixed metla sulfate solution and ammonium oxalate. In order to minimize the metallic ion losses and to control the particle size, the optimum reaction conditions were as follows; reaction temperature $25^{\circ}C$, metal sulfate concentration 0.3M, molar ratio of ammonium oxalate/mixed metal sulfate 1.1:1. The production yield was as high as 97.6% of theoretical yield at optimum reaction condition.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.126-132
• /
• 1992

Experiment has been performed to investigate the thermal and magnetic properties of Mn-ferrite by electrolysis. Using the 0.2%C mild steel as soluble anode and SUS 304 stainless steel as cathode, Mn-ferrite could be made from the sulfuric acid leaching of the wasted manganese dry cell and $MnSO_4$reagent by electrolysis. As the result of X-ray diffraction, thermal analysis and magnetic measurement, Mn-ferrite was the spinel type in $Mn_{x}Fe_{3-x}O_4$ (X=1), the weight loss rate of $Mn_{x}Fe_{3-x}O_4$ were linearly increased up to the $200^{\circ}C$. Ms, Mr and Hc values were decreased with increasing Mn content and heating temperature. When Mn-ferrite was formed by $MnCl_2$reagent electrolysis, Ms values were higher than those formed from the sulfuric acid leaching of the wasted manganese dry cell and $MnSO_4$reagent by electrolysis. In Mn-ferrite, which was formed from the sulfuric acid leaching of the wasted manganese dry cell by electrolysis, Ms and Mr values were higher, Hc values were lower than which was formed by $MnSO_4$ reagent electrolysis at $200^{\circ}C\;and\;300^{\circ}C, while the same values at $100^{\circ}C$. The shape of particles was spherical type, the sizes of them were about $0.1{\mu}m$ sub-micron in $MnSO_4$reagent electrolysis, $0.5{\mu}m$ in the sulfuric acid leaching of the wasted manganese dry cell by electrolysis.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.146-152
• /
• 2003

The waste ferrites from magnetic core manufacturing process were used to $CO_2$gas decomposition to avoid the greenhouse effects. The waste ferrites are the mixed powder of Ni-Zn and Mn-Zn ferrites core. In the reduction of ferrites by 5% $H_2/Ar$ mixed gas, the weight loss of ferrites was about 14~16wt%. After the$CO_2$gas decomposition reaction, the weight of the reduced ferrites was increased up to 11wt%.$CO_2$gas was decomposed by oxidation of Fe and FeO in reduced compound and the phase of the waste ferrite was changed to spinel structure. A new technique capable of$CO_2$decomposition as low cost process through utilizing waste ferrite was development.