• 제목/요약/키워드: Mn-PC

검색결과 36건 처리시간 0.023초

VOCs 연소용 Mn-PC 촉매 특성 (Catalytic Characteristics of Mn-PC for VOCs Combustion)

  • 서성규;마충곤;류의;윤형선;김상채
    • 대한환경공학회지
    • /
    • 제33권4호
    • /
    • pp.237-242
    • /
    • 2011
  • 본 연구에서는 Mn-PC 촉매와 상압유통식 반응장치를 이용하여 $200{\sim}380^{\circ}C$ 범위에서 VOCs(아세트알데히드, 프로피온알데히드, 톨루엔) 연소반응을 수행하였다. 촉매 전처리(air, $450^{\circ}C$, 1 hr, 60 cc/min) 전 후의 물리화학적 특성변화 조사는 TGA (Thermogravimetric Analyzer), BET (Brunauer Emmett Teller), EA (Elemental Analyzer), XRD (X-ray Diffractometer) 및 SEM (Scanning Electronic Microscope)을 이용하여 파악하였다. TGA 분석결과 Mn-PC의 열중량(공기 분위기) 감소는 $419^{\circ}C$에서 88 wt.%를 나타내었으며, 전처리 후 비표면적은 크게 증가하는 것으로 확인되었다. EA 분석결과 전처리를 통해서 유기물 성분은 분해 또는 연소되어 거의 관찰되지 않는 것으로 파악되었다. 또한 XRD분석을 통해 Mn-PC 촉매가 전처리 후 새로운 형태의 산화물인 $Mn_3O_4$로 전이됨을 확인하였다. 그리고 SEM 분석결과 전처리 과정에서 많은 micropore가 생성된 것으로 관찰되었다. 프로피온알데히드 연소의 경우 전처리한 Mn-PC는 $Mn_3O_4$와 fresh한 Mn-PC 보다 우수한 촉매활성을 나타내었다. 전처리된 Mn-PC상에서 VOCs 연소 효과는 톨루엔 < 아세트알데히드 < 프로피온알데히드 순서로 나타났다.

새로운 거대분자 MR 조영제의 합성 및 MR 특성에 관한 연구 (The Synthesis and MR Properties of New Macromolecular MR Contrast Agent)

  • 장용민;장영환;황문정;박현정;전경녀;이종민;배경수;강봉석
    • Investigative Magnetic Resonance Imaging
    • /
    • 제6권1호
    • /
    • pp.35-40
    • /
    • 2002
  • 목적 : 새로운 개념의 macromolecular MR 조영제를 개발하여 자기이완적 특성 및 조직특이성 조영제로서의 가능성을 탐색해 보고자 하였다. 대상 및 방법 : Phthalocyanine (PC)을 상자성 원소의 배위자로 선택하였다. 2.01g (5.2 mmol)의 Phthalocyanine을 0.37 g(1.4mmo1)의 Mn chloride와 $310^{\circ}C$에서 36시간동안 반응시킨 후 혼합물을 크로마토그래피(CHC13/CH3OH 98/2 v/v, Rf, 0.76)로 정제하여 1.04 g (46%)의 MnPC (분자량 2000)를 얻었다. 0.1 mM로 희석시킨 MnPC를 1.5T(64MHz) MR 장비를 이용하여 T1/T2 자기이완율을 측정하였다. MnPC의 MR 영상 특성을 알아보기위해 1.5T MRI에서 스핀반향 기법(TR/TE= 500/14 msec)과 경사에코 기법중 FLASH 기법(TR/TE=80/4 msec, flip angle=60)을 사용하여 매 10분 간격으로 최고 4시간까지 연속적으로 토끼의 간에서 영상을 획득하였다. 농도별 차이를 알아보기위해 MnPC를 20 mM, 50 mM, 100 mM로 희석하여 사용하였다. 결과 : MnPC의 1.5 T(64 MHz)에서의 자기이완율은 Rl : 7.28 $mM^{-1}S^{-1}$, R2=55.56 $mM^{-1}S^{-1}$으로 small molecular weight 조영제인 Gd-DTPA의 Rl(=4.8 $mM^{-1}S^{-1}$), R2(=5.2 $mM^{-1}S^{-1}$) 값과 비교할 때 T1/T2 자기이완율이 매우 컸다. 스핀반향과 FlASH 기법 모두에서 조영증강은 조영제 주사후 약 10분 정도에 최고치에 달한 후 약 2시간 정도까지 유지하였다. MnPC는 small molecular weight의 간특이성 조영제들인 Gd-EOB-DTPA, Gd-BOPTA 및 MnDPDP과 비교할 때 조명증강을 유지하는 시간이 훨씬 더 긴 특성을 보였다. MnPC는 시간 경과에 따라 담도로 배출되었다. 결론 : 새로운 종류의 macromolecular MR agent인 MnPC를 자체 개발하였고 자기이완율을 측정한 결과 T1/T2 효과가 기존의 small molecular Gd-chelate에 비해 매우 큼을 알 수 있었다. MnPC는 간세포에 흡수된 후 담도계로 배출되는 간특이성 조영제임을 확인하였다.

  • PDF

실험적으로 유발시킨 VX2 동물모델에서의 Mn-phthalocyanine과 Mangafodipir trisodium의 비교영상 (The Comparative Imaging Study on Mn-phthalocyanine and Mangafodipir trisodium in Experimental VX2 Animal Model)

  • 박현정;고성민;김용선;장용민
    • Investigative Magnetic Resonance Imaging
    • /
    • 제8권1호
    • /
    • pp.32-41
    • /
    • 2004
  • 목적 : MnPC의 자기이완성질을 살펴보고, 토끼의 간에 이식한 VX2 암종을 이용해 자기공명영상에서 간의 조영증강형태를 관찰하고자하였다. 또한 간세포 특이성 조영제 사용 시와 비교하여 MnPC의 조직특이성 조영제로서의 가능성을 탐색해 보고자 하였다. 대상 및 방법 : 조영제 합성시 상자성 원소의 배위자로 phthalocyanine(PC)를 선택하였다. 2.01 g (5.2 mmol)의 phthalocyanine을 0.37g(1.4 mmol)의 manganese chloride와 $310^{\circ}C$에서 36시간동안 반응시킨 후 혼합물을 크로마토그래피 (CHC13: CH3OH=98:2, volume ratio)로 정제하여 2000 달톤의 분자량을 갖는 1.04 g $(46\%)$의 MnPC를 얻었다. 자기이완율은 MnPC를 0.1 mmol로 희석시켜 1.5 T (64 MHz)에서 측정하였다. VX2 암종은 토끼의 간실질 내에 종양세포 부유액을 주입해 실험적으로 유발시켰다. 모든 영상은 1.5 T MR장비에서 무릎관절코일을 사용하여 획득하였다. 본 연구에서 새로 개발된 거대분자 자기공명영상 조영제인 MnPC (4m-mol/kg)와 간세포 특이성 조영제인 Mn-DPDP (0.01 mmol/kg)가 사용되었으며 이들 조영제는 토끼의 이정맥을 통해 주입되었다. T1 강조영상은 스핀에코 (TR/TE=516/14 msec)와 고속다면회손경사회복 (TR/TE=80/4 m-sec, flip angle $60^{\circ}$)을 사용하여 얻었고, T2 강조영상의 획득을 위해서는 고속스핀에코 (TR/TE=1200/85 m-sec)를 사용하였다. 결과 MnPC의 1.5T (64MHz)에서의 자기이완율은 $R1=7.28\;mM^{-1}S^{-1}$, $R2=55.56\;mM^{-1}S^{-1}$ 이었고, MnPC의 높은 T2 자기이완율은 T2 강조영상에서의 정상 간실질의 신호강도를 감소시켜 간실질과 VX2 암종의 구분을 쉽게 하였다. MnPC 주입시 T1 강조영상에서는 간세포 특이성 조영제의 주입시보다 종양의 경계가 명확하였고, 조영증강은 주입후 최소한시간 이상 높게 유지되었다. 결론 : MnPC가 간세포로 흡수되어 담관으로 배설된다는 사실은 Mn-DPDP와 유사한 특성이며 이는 MnPC가 새로운 간특이성 조영제임을 확인시켜 준다. 또한 MnPC의 R2값이 기존의 조영제에 비해 매우 크다는 사실은 T1 조영제로서 뿐만 아니라 T2 조영제로서의 사용 가능성을 보여준다. 이러한 사실들을 좀더 정확하게 뒷받침하기 위해서는 임상적으로 사용되기 이전에 생체 내 그리고 시험관내 연구가 더 필요하며 다른 동물모델에서의 추가적인 연구가 요구된다.

  • PDF

인삼 유묘 뿌리썩음병 진전에 따른 토양군별 특성 (Characteristics of Soil Groups Basd on the Development of Root Rot of Ginseng Seedlings)

  • 박규진;정후섭
    • 한국식물병리학회지
    • /
    • 제13권1호
    • /
    • pp.46-56
    • /
    • 1997
  • Based on the principal component analysis (PCA) of Richards' parameter estimates, ginseng field soils were grouped as the principal component 1 (PC1) and the principal component 2 (PC2). The microflora and physico-chemical characteristics of each soil group were compared to elucidate soil environmental factors affecting the disease development of root rot of ginseng seedling. Among 3 soil groups by PC1, there were differences in the populations of total fungi (TF) and Cylindrocarpon plus Fusarium (C+F), and the population ratio of Cylindrocarpon plus Fusarium to total fungi or total bacteria (C+F/TF, C+F/TB) in rhizoplane of ginseng seedlings, the population of total actinomycetes (TA) and the population ratio of total Fusarium to total actinomycetes (Fus/TA) in soil, and soil chemical properties (EC, NO3-N, K, Mn, ect.). Among 4 soil groups by PC2, there were differences in TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane, Trichoderma plus Gliocladium (T+G) in soil, and P2O5 content in soil. Especially, EC, NO3-N, K, K/Mg and Mn were positively correlated to PC1, and TA was negatively to PC1; however, TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane were significantly correlated to PC2 positively. On the other hand, microbes in the rhizoplane were not significantly correlated to the stand-missing rate (SMR), although TA and Fe/Mn were negatively correlated, and pH and Ca were positively correlated to SMR.

  • PDF

R.F. Magnetron Sputtering을 이용한 리튬이차전지 정극용 ${LiMn_2}{O_4}$의 제조 및 특성 (Fabrication and Characterization of ${LiMn_2}{O_4}$ Cathode for Lithium Rechargeable Battery by R.F.Magnetron Sputtering)

  • 우태욱;손영국
    • 한국세라믹학회지
    • /
    • 제37권6호
    • /
    • pp.552-558
    • /
    • 2000
  • LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.

  • PDF

The Characteristics of Liver Enhancement Pattern using a New Macromolecular MR Contrast Agent in VX2 Tumor Model of Rabbits

  • 박현정;황문정;이영주;장용민
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
    • /
    • pp.130-130
    • /
    • 2002
  • Purpose: To evaluate the liver enhancement pattern of MR images obtained after administration of manganese phthalocyanine (MnPC), which is a newly developed macromolecular MR contrast agent, In experimentally implanted VX2 tumor of rabbits and compare with G4-DTPA and Mn-DPDP.

  • PDF

Sol-Gel 법에 의한 LiMn$_2$O$_4$의 합성 및 리튬이차전지용 전극물질로의 특성 (The Synthesis of LiMn$_2$O$_4$by sol-gel method and properties as electrode materials for lithium secondary battery)

  • 이진식;박용성;우제완
    • 한국결정성장학회지
    • /
    • 제10권3호
    • /
    • pp.219-225
    • /
    • 2000
  • 스피넬형의 $LiMn_2$O$_4$는 출발물질로 LiOH와 Mn($CH_3$COO)$_2$.$4H_2$O를 사용하여 졸-겔법으로 합성한 xerogel을 $150^{\circ}C$로 1차 열처리한 후 $350^{\circ}C$로 2차 열처리하여 합성하였다. 그러나 $350^{\circ}C$ 이상으로 열처리할 경우 $Mn_2O_3$가 생겼으며, 이로 인해서 Li/lM $LiClO_4$(in PC)$LiMn_2O_4$cell을 구성하여 0.25 mA/$\textrm{cm}^2$의 전류밀도로 충.방전 실험을 한 결과 $350^{\circ}C$에서 열처리한 것은 15 cycle후에 88 mAh/g에서 56 mAh/g으로 35.7%의 용량감소가 나타났으나 $500^{\circ}C$에서 열처리한 것은 89 mAh/g에 51 mAh/g으로 42.5%의 용량감소가 나타났으며 이는 $Mn^{3+}$ 의 증가로 인한 Jahn-Teller distortion의 결과로 볼 수 있다.

  • PDF

재충전이 가능한 박막전자용 $LiMn_2O_4$ 박막 전지의 전기화학 특성 분석 (Analysis of Electrochemical Characteristics of the Rechargeable $LiMn_2O_4$ Thin Film Battery)

  • 김주석;정헌준;김찬수;주승기
    • 전기화학회지
    • /
    • 제3권3호
    • /
    • pp.131-135
    • /
    • 2000
  • [ $LiMn_2O_4$ ]박막전지의 충방전 사이클에 따른 용량 감소의 원인을 파악하기 위하여, $LiMn_2O_4/1M\;LiClO_4-PC/Li$전지를 구성하여 충방전 사이클에 따른 AC impedance분석을 수행하였다. 적절한 등가회로를 이용하여 비선형 최소자승 맞춤에서 얻은 값이 Impedance측정 결과와 잘 일치하였다. 충방전에 따른 정전용량은 초기의 급격한 감소를 보인 이후 완만한 감소를 보였다. 충방전 사이클이 초기 70-100사이클까지는 저항 성분 중 양극전해질 계면의 전하 전달저항 성분이 급격히 증가하다가 이후 안정된 값을 보임으로 초기 급격한 용량변화의 원인으로 파악되었다. 전하전달 저항이 안정된 이후에는 Warburg저항이 충방전에 따라 조금씩 증가하였으며, LiMn2O4박막의 화학확산 계수가 사이클에 따라 초기 $5.15\times10^{-11}cm^2/sec$에서 800사이클이 지난 후 $6.3\times10^{-12}cm^2/sec$로 점차 감소하는 것이 관찰되어 100사이클이 후의 용량감소의 지배적 원인으로 파악하였다. Warburg저항의 증가는 Jahn-Teller변형 또는 Mn용해에 의한 것으로 추정하였다.

Solvent Extraction Separation of Co, Mn and Zn from leaching solution from Ni-Cd battery by Na-PC88A

  • Ahn Jong-Gwan;Park Kyoung-Ho;Sohn Jeong-Soo;Kim Dong-Jin;Lee Jaereyeong;Jeong HunSaeong
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.618-623
    • /
    • 2003
  • Solvent extraction experiments for separation of impurities from Ni-rich solution were carried out for manufacturing of high purity Ni compounds from acid leaching solution of spent Ni-Cd secondary battery. Artificial and leaching solutions were used as aqueous phases and PC88A saponified by sodium in kerosene were used as organic phase. The extraction order is Zn>Mn>Co>Ni and extraction percentage of metal ions was increased with increase of the concentration of extractant, initial pH of aqueous phase and ratio of O/A. The separation of cobalt, zinc and manganese from nickel was effectively accomplished at the condition of extraction stage=l, O/A=1 and initial pH 5.0 with 1.0 $mol/dm^3$ PC88A saponified to $50\%$ with NaOH.

  • PDF

리튬 이온 폴리머 전지용 고용량 LiMnO2-organic Composite 정극의 전기화학적 특성 (Electrochemical Properties of LiMnO2-organic Composite Cathodes with High Capacity for Lithium Ion Polymer Battery)

  • 김종욱;조영재;구할본
    • 한국전기전자재료학회논문지
    • /
    • 제15권2호
    • /
    • pp.162-168
    • /
    • 2002
  • The purpose of this study is to research and develop LiMnO$_2$-organic and Li$_{0.3}$MnO$_{2}$-organic composite with high energy density for Lithium ion polymer battery. This paper describes cyclic voltammetry, impedance sepctroscopy, electrochemical properties of LiMnO$_2$-organic and Li$_{0.3}$MnO$_{2}$-organic composite with polymer electrolyte as a function of a mixed ratio. The first discharge capacity of LiMnO$_2$-PAn with 3 wt.% PAn was 83mHA/g, while that of Li$_{0.3}$MnO$_{2}$-PPy composite was 136 mAh/g. The Ah efficiency was above 98% after the 2nd cycle. The LiMnO$_2$-PAn with DMcT 2 wt.% and Li$_{0.3}$MnO$_{2}$-PPy composites cathode with 5wt. PPy in PVDF-PC-EC-LiClO$_4$ electrolyte showed good capaity with cycling. The discharge capacity of LiMnO$_2$-PAn with wt.% DMcT was 80 and 130 mAh/g at 1st and 12th cycle, respectively. The capacity of LiMnO$_2$-PAn composite with 2 wt.% DMcT was higher than that of LiMnO$_2$-PAn composite.mposite.