• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.363-372
• /
• 2002

PM$_{10}$ aerosols were collected using low volume air sampler every month intervals from September 1992 to August 1991 in Seoul. These samples were analyzed for 20 trace elements (Al, As, Ba, Br, Ca, Cl, Co, Cr, Fe, K, Mn, Na, Ni, Pb, Sc, Se, Si, Ti, V and Zn) by INAA (instrumental neutron activation analysis), XRF (x-ray fuorescence spectrometer), and ICP (inductively coupled plasma). PM$_{10}$ mass concentrations higher than 70 $\mu$g/m$^3$ were 32% of 60 samples and had significantly higher concentrations in spring and winter than in summer and fall (p-value<0.001). The elements of As, Br, Cl, Ni, Pb, Se, V, and Zn are enriched by factors of 20 to 2,000 relative to their natural abundance in crustal soil. To further identify common sources of pollution-related trace elements, factor analysis was applied to the trace elements concentration data. Major sources that contribute to the atmospheric loading of these elements were found to include fossil fuel combustion, automobile and waste incineration (33.2%), metal processing industry (18.2%), and soil(29.8%).8%).

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.252-258
• /
• 2004

This study was performed to evaluate characteristic of acid mine drainages (AMD) from abandoned mines in Kangwon-Do. Youngdong abandoned mine, and Soo and Hambaek abandoned mines in Hamtae were selected for this study. Average pHs of the mine drainages were 3-6.5, and those of Youngdong and Hambaek drainages were very acidic as 3-4. $SO_4^{-2}$ of Youngdong and Hambaek drainages were over 1,600 mg/L, which higher than average value (845 mg/L) of acid mine drainages in nationwide. Cu, Mn, and As concentrations of the drainages were lower than ‘Pollutant Discharge Permission'. Fe concentrations of Youngdong and Hambaek drainages were approximately 96 mg/L, which were two times higher than average value in nationwide. From correlation analysis using SPSS, significant correlation was not discovered between 'contaminants' analyzed in three acid mine drainages.

• 한국주조공학회지
• /
• 제32권2호
• /
• pp.65-74
• /
• 2012

In this paper, we present the results of our studies on optimal die design towards development of a vacuum die casting process to fabricate fuel cell bipolar plate with micro-channel array. Cavity and overflow shape is designed by computational filling analysis of MAGMA soft. Optimal die design consists of seven overflows at the end of cavity and three overflows at each side wall of cavity. The molten metal that passed the gate and reached the side wall flowed into the side overflow, no turbulent flow occurred, and the filling behavior and velocity distribution were uniform. In addition, partially solidified molten metal passing through the channel was perfectly eliminated by overflow without back-flow. When vacuum pressure, injection speed of low and high region was 300 mbar, 0.3 m/s and 2.5 m/s respectively with Silafont 36 die casting alloy, sound sample without casting defects was obtained. The experimental results are nearly consistent with simulation results.

• 대한환경공학회지
• /
• 제27권6호
• /
• pp.670-674
• /
• 2005

The respiratory quinone profile was used as a tool for the study on microbial community structure in the mine tailings of abandoned mines over the depth. For the study, the area of Jingok mine located in Bongwha, Korea has been selected. The distributions of Cd, Cu, Pb, Al, Fe and Mn showed the following common patterns; the highest values in the upper part of mine failings (0-20 cm), rapid decrease with increasing depth. The dominant quinone species of the mine tailings were UQ-9 followed by UQ-10, suggesting that microbes had contributed to heavy metal degradation. The quinone contents in mine tailings ranged from 5.0 to 24.9 nmol/kg. The microbial diversity in the upper part of mine tailings (0-40 cm) was higher than that of lower part of mine tailings (100-120 cm).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.201-201
• /
• 2006

영구자석은 크게 Hard ferrite와 희토류계 자석, 그리고 Alnico 주조자석으로 구별되어진다. 그동안 Hard ferrite는 산업적으로 전자기 응용제품 또는 각종 구동 모터에 응용되어 왔지만, 최근 Nd계 희토류 자것이 고성능 모터의 소재로 급격히 대체되고 있다. 하지만, 희토류계 원료에 비해 동일 중량 대비 40~60배 가량 저렴한 Hard ferrite의 사용은 현재까지도 꾸준히 유지되고 있으며, 최근 자동차 고성능 모터용 Sr ferrite의 개발이 연구 중이다.[2] 본 연구에서는 제일원리 전산모사를 통하여 HCP 구조의 기본 Unit Cell 64개 원자를 가진 Sr-ferrite의 격자상수를 계산하여 기존 연구결과와 비교하였으며, 자화에너지와 자기모멘트를 계산하였다. 또한 향후 각종 첨가물의 영향에 대한 연구를 위해 기본 구조 및 치환 구조에 대해 고찰하였다. 그 결과 가장 안정한 에너지를 갖는 격자상수는 a=5.88, b=23.03으로 계산되어 Kimura et al의 측정 결과와 유사한 결과를 얻을 수 있었으며, $E_F$가 3.9171, $M_B$는 46.6481로 계산되었다. 항후 Sr-ferrite의 구조에서 Fe atom의 일부를 동일주기 원소인 Cr, Mn, Co, Ni, Cu로 치환하여 자기적 특성을 계산하여 본 연구결과와 비교하고자 한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1179-1180
• /
• 2005

To immobilize the pollutants from wastewater in situ, two phosphatic clays collected from different areas in Egypt (eastern and western Sebaia, Aswan-Isna, Upper Egypt) used to remove contaminant ions from industrial wastewater. Obtained results confirmed the strong relationship between phosphatic clay and Pb elimination from wastewater. The sensitivity classification of phosphatic clay toward ions retained as described in three categories: highly sensitive to retain Pb , Al and Cr ; moderately sensitive for Mn; and weakly sensitive for Band Zn. Data suggested that large fraction of Pb removed by phosphatic clays stayed intact under a wide variation in extracting solution pH (3-11). In situ immobilization is considered a promising technique that has the potential to remove contaminant ions from wastewater. Two important factors need to be considered when applying this technique: The first, is the clay must be effective and selective under different composition of wastewater. The second, is the immobilized ions should be stable and non-leacheable under varying water conditions. Phosphatic clays with $Pb^{2+}$ were suitable to achieve these two factors. Possible mechanism for removal $Pb^{2+}$ by phosphatic clays is the formation of fluoropyromorphite through the dissolution of fluoro and hydroxyl apatite by its precipitation from solution, beside, Pb complexation at phosphatic clay surface at P-OH sites.

• The Korean Journal of Ecology
• /
• 제26권6호
• /
• pp.327-333
• /
• 2003

A mixed forest of pines (Pines densiflora and Pinus rigida) and an oak forest (Quercus mongolica) in Mt. Kwanak in Seoul were limed with 1.5 t/ha and 3 t/ha of dolomite in 1993 and investigated the effects of liming on the chemical changes in the 0-5 cm and 5∼10 cm layers of soil from 1994 to 1995. Soil pH values were greater in the limed plots than in the control plot by the unit of 0.1-0.6 in the pine forest and 0.1∼0.2 in the oak forest. Ca concentrations in the limed plots were greater than those in the control plots in both the pine and oak forests. A considerable increase in Mg concentrations in soil was observed in the limed plots. K and Na concentrations in the limed plots appeared to decrease in both the pine and oak forests two years after liming. Although Al concentrations were greater in the limed plots than in the control plot in the pine forest in 1994, there was a tendency of a decrease in the concentration of this metal in the limed plots in 1995. Mn concentrations also tended to decrease in the limed plots in both the pine and oak forests.

• 한국환경과학회지
• /
• 제10권3호
• /
• pp.209-216
• /
• 2001

Dustfall particles were collected by the modified American dust jar (wide inlet bottle type) at 6 sampling sites in Pusan area from March, 1999 to February, 2000. Thirteen chemical species (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, Si, and Zn) were analyzed by AAS and ICP. The purposes of this study were to estimate qualitatively various bulk deposition flux of dustfall and insoluble components by applying regional and seasonal distribution. Dustfall amount of regional variations were found in order of coastal zone, industrial zone, commercial zone, agricultural zone and residential zone, and seasonal total dustfall had higher concentrations during spring for 6.741 ton/${km}^2$/season, lower concentrations during summer for 1.989 ton/${km}^2$/season, and annual total concentration was 17.742 ton/${km}^2$/year. The regional distributions of enrichment factor show well-defined anthropogenic metals (Cd, Cu, Pb, and Zn) at industrial and agricultural zone, and contribution rate of soil particles were found in order of summer, fall, winter and spring. Factor loading effects of chemical composition of dustfall were found in order of road traffic emission source and combustion processed source, industrial activity source, soil source and marine source.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.9-22
• /
• 2017

Many new functional materials have been studied for efficient production and storage of energy. Many new materials such as sodium-based and sulfide-based materials have been proposed for energy storage, but research on Li batteries is still dominant. Due to the influence of environmental concerns regarding nuclear energy, interest in and research on fusion power are steadily increasing. For the commercialization of nuclear fusion, a design standard based on a considerable level of physical analysis and modeling is proposed. Nevertheless, limitations of existing materials in nuclear fusion environments limit practical applications. Tritium propagation material for continuous fusion reaction is one of the core materials, and therefore research on this material is being carried out intermittently. The key material for Li-based energy storage and tritium generation is the functional material Li-M-O. In this review, a structural description of functional Li-M-O system materials and technical trends for its applications are introduced.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.376-380
• /
• 1998

The chemical copositions in rice hulls of twenty six varieties which are one of the largest agricultural by-products in Korea were analyzed. The chemical compositions were 8.56~9.70% moisture, 10.01~17.16% ash, 44.02~55.50% crude fiber, 0.26~2.90% crude protein, 9.20~14.50% starch, and 0.28~0.69% lipid. There were no significantly difference in chemical compositions among twenty six varities. The mineral contents(mg/100g) were 14.3~392.4mg K, 59.4~389.1mg Ca, 31.78~377.8mg Zn, 19.4~104.4mg Na, 12.9~47.6mg Mg, 12.8~37.0mg Si, 8.3~30.5mg Fe, 7.9~26.1mg Al, 7.6~23.5mg Mn, and 6.3~40.3mg P. The contents of IDF (insoluble detergent fiber), SDF(soluble detergent were 70%, 1~2%, 67~73%, 51~60%, 11~17% and 0.3~2%, respectively. The lignin content was higher in Hwa-Young and Mankum than in others. The amounts of ethanol extracts of rice hulls were 1.01~1.52%. In conclusion, the chemical compositions were not significantly difference among twenty six rice hulls varieties.