• 한국토양비료학회지
• /
• 제47권3호
• /
• pp.191-198
• /
• 2014

Absorption and accumulation of heavy metals in plants were determined by phytoavailable contents rather than total contents of heavy metals. Therefore, phytoavailability-based management protocol should be prepared for safe food crop production in contaminated agricultural lands. This study was conducted to understand the distribution and phytoavailability of heavy metal in the Korean agricultural soils affected by abandoned mining sites along with investigation of soil properties (soil pH, OM, DOC, clay content, Al/Fe/Mn content) influencing on the metal phytoavailability. For this, 142 agricultural soils located nearby 39 abandoned mining sites distributed in five province in Korea, were analyzed. Among the four different heavy metals, cadmium (Cd) and zinc (Zn) appeared to exist in more phytoavailable form than cupper (Cu) and lead (Pb). Soil pH was the main factor governing phytoavailable Cd, Pb, and Zn showing positive relationship with partitioning coefficients of the corresponding metals; Cd (r = 0.66, P < 0.001), Pb (r = 0.70, P < 0.001), and Zn (r = 0.62, P < 0.001). This implied higher phytoavailability of the corresponding metals with higher soil pH. In contrast, phytoavailability of Cu (r = 0.41, p < 0.01) was only negatively related with soil DOC (dissolved organic carbon).

• 동굴
• /
• 제45권46호
• /
• pp.9-31
• /
• 1996

The Mt. Peakdu is situated in north of the main peninsula, commanding geographically coordinated between longitude W($127^{\circ}$ 15' - $128^{\circ}$ 00') to E($128^{\circ}$ 15'- $129^{\circ}$ 00'), between latitude from S($41^{\circ}$ 15'- $42^{\circ}$ 00') to N($42^{\circ}$ 10'- $42^{\circ}$ 40'). The Manjyang-Gul in Cheju volcanic island is situated in the south of the main peninsula, commanding the Korean Strait, geographically coordinated longitude N($33^{\circ}$ 32' 26") and E($126^{\circ}$ 46' 48"). The quantitative analysis using XRF of volcanic rock samples for the north of Lu- Ming- Feng in Mt. Peakdu Group and the Manjang-Gul in Cheju island was Performed. The major chemical components by group analysis are as follows; Peakdu-Mt. Cheju Peakdu-Mt. Cheju (1) $Na_2O$(3.29Wt% and 3.27Wt%) (2) MgO (3.95Wt% and 6.l5Wt%) (3) $Al_2O_3$((17.64Wt% and 15.l7Wt%) (4) $SiO_2$((50.62Wt% and 50.99Wt%) (5) $P_2O_5$ (0.36Wt% and 0.30Wt%) (6) $K_2O$ (1.37Wt% and 1.04Wt%) (7) CaO (8.56Wt% and 8.06Wt%) (8) $TiO_2$ (2.37Wt% and 2.l5Wt%) (9) MnO (0.llWt% and 0.l6Wt%) (10) $Fe_2O_3$(9.l2Wt% and 12.56Wt%) The Group analysis data were compared in the relation within the age of formation for $0.16{\pm}0.08Ma$ in Mt. Peakdu Group, and $0.42{\pm}42Ma$ or $0.42{\pm}42Ma$ in Cheju island for K-Ar age. The crystal structure are mixed crystal of monoclinic, hexagonal and triclinic system in Mt. Peakdu Group and mixed structure of triclinic and cubic system in Cheju volcanic island.ic island.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 춘계 학술발표대회
• /
• pp.142-142
• /
• 2003

본 연구에서는 kiwifruit 과육 속에 들어 있는 단백질분해효소의 gelatin분해활성을 조사하고 그 산업적 방안을 검토하였다. Kiwifruit 과육에서 3개의 단백질분해효소의 활성 밴드(PI, PII, PIII)가 관찰되었다. 단백질분해효소 PI은 220 kD, PII는 51 kD, PIII는 26 kD에 해당하는 것으로 추정할 수 있었다. 이들 단백질분해효소 PI, PII, PIII는 모두 pH 2.0~5.0 범위에서 높은 활성을 보였으며 pH 4.0에서 가장 높게 나타났다. 이들 단백질분해효소 PI, PII, PIII는 모두 cysteine proteinase 저해제인 E-64와 iodoacetate에 의해서 저해되었으며, cysteine proteinase를 촉진하는 DTT, cysteine 및 $\beta$-mercaptoethanol에 의해서 활성이 증가하였다. 그 중 단백질분해효소 PIII는 분자량과 효소의 특성으로 보아 actinidin (EC 3.4.22.14)과 동일한 것으로 판단되었다. 단백질분해효소 PI, PII, PIII는 모두 $Ca^{2+}$, $Mg^{2+}$과 $Mn^{2+}$에 의해 촉진되었으며, $Zn^{2+}$과 Hg$^{2+}$에 의해 완전히 저해되는 것으로 나타났다. 하지만, Co$^{2+}$, Cu$^{2+}$, $Al^{3+}$ , Fe$^{3+}$ 등 금속이온의 영향은 다소 다르게 나타났다. Kiwifruit 과육의 단백질분해효소 PI, PII, PIII 중에서 PI과 PII는 온도가 증가함에 따라 활성이 점차 낮아졌으나 PIII는 비교적 안정한 것으로 조사되었다. 특히, PIII는 5$0^{\circ}C$ 이내의 범위에서 48시간 경과시에도 75% 이상의 활성을 보여 이 범위의 온도에서는 상당 시간 동안 안정한 것으로 나타났다. 단백질분해효소의 산업적 가치를 고려해 볼 때 우선적으로 넓은 기질특이성과 열안정성이 높아야 한다. Kiwifruit에서 추출한 단백질분해효소는 4$0^{\circ}C$ 전후에서 최대의 활성을 보이고, 고온에서도 상당 시간 비교적 안정한 특성을 보여 식품제조, 식육연화 등 식품산업 분야에서의 활용가능성이 높을 것으로 보이며, 나아가 단백질이 갖는 식품학적 기능성을 높이는 데에도 사용할 수 있을 것으로 판단된다.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.625-631
• /
• 1999

This study was performed to determine the optimum coagulant dosing for effective treatment of raw water in Chinyang lake. Removal rates of algae and characteristics of the water according to coagulants dosage were investigated by treatment with Microcystis aeruginosa, which is a kind of blue-green algae, to the raw water below 5NTU. The coagulants dosage for maximum removal rate of algae were 30 mg/$\ell$ of Alum, 30 mg/$\ell$ of PAC and 10 mg/$\ell$ of PACS, respectively. The removal rate of algae in 30 mg/$\ell$ of PAC was highest as 85% compared with the other treatments. At the point of maximum removal rate of algae, the removal rates of turbidity were 34%, 66% and 22% in Alum, PAC and PACS, respectively. Residual Al was decreased depend upon decreasing turtidity in water by treatment of Alum or PAC, but decreased depend upon increasing turbidity in water by treatment of PACS. The removal rate of ${Mn}_{2+}$ in water was high in the order of Alum, PAC and PACS treatment. And ${Fe}_{2+}$ in water was not changed by treatemnt of these coagulants. Particle numbers distributions according to the particle size of suspended solids that were not precipitated at 8 min. of settling time after treatment of coagulants dosage for the maximum removal rate of algae were investigated. Most of the particle sizes were below 30 $\mu$m and particle numbers distributions below 10 $\mu$m were 64%, 56% and 66% by treatment of Alum, PAC and PACS, respectively. Zeta potential was in the range of -6.1~-9.7 mV at optimum coagulants dosage for algae removal.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.593-600
• /
• 1999

In order to determine the changes of sediment facies and metal levels in surface sediments after the construction of Shiwha Lake, surface sediments were sampled at 8 sites located on the main channel monthly from June, 1995 to August, 1996 and analysed for 12 metals (Al, Fe, Mn, V, Cr, Co, Ni, Cu, Zn, Cd, As and Pb) by ICP/AES and ICP/MS. Two groups of sampling sites(the inner lake with 3 sites and the outer lake with 5 sites) are subdivided by the surface morphology ; the inner lake is a shallow channel area with a gentle slope, while the outer lake is relatively deep and wide channel with a steep slope which has many small distributaries. After the construction of dam, fine terrestrial materials were deposited near the outer lake, which resulted in the change of major sediment facies from sandy silt to mud. With the deposition of fine sediments in the outer lake, anoxic water column induced the formation of sulfide compounds with Cu, Cd, Zn and part of Pb. Metal (Cr, Ni, Cu, Zn and Cd) contents in sediments increased up to twice within 2 years after the construction of dam. This is due to the direct input of industrial and municipal wastes into the lake and the accumulation of metals within the lake. In addition, frequent resuspension of contaminated sediments in a shallow part of the lake may make metal-enriched materials transport near the outer lake with fine terrestrial materials. As the enrichment of Cu, Zn, Cd and part of Pb in the Shiwha Lake may be related to the formation of unstable sulfide compounds by sulfate reduction in anoxic water or sediment column, the effect of mixing with open coastal seawater is discussed.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.512-521
• /
• 2017

This paper reports development process of a university-based sounding rocket using simplified hybrid rocket propulsion system for low-altitude flight application. A hybrid propulsion system was tried to be designed with as few components as possible for more economical, simpler and safer propulsion system, which is essential for the small scale sounding rocket operation as a CanSat carrier. Using blow-down feeding system and catalytic ignition as combustion starter, 250 N class hybrid rocket system was composed of three components: a composite tank, valves, and a thruster. With a composite tank filled with both hydrogen peroxide($H_2O_2$) as an oxidizer and nitrogen gas($N_2$) as a pressurant, the feeding pressure was operated in blowdown mode during thruster operation. The $MnO_2/Al_2O_3$ catalyst was fabricated for propellant decomposition, and ground test of propulsion system showed the almost theoretical temperature of decomposed $H_2O_2$ at the catalyst reactor, indicating sufficient catalyst efficiency for propellant decomposition. Auto-ignition of the high density polyethylene(HDPE) fuel grain successfully occurred by the decomposed $H_2O_2$ product without additional installation of any ignition devices. Performance test result was well matched with numerical internal ballistics conducted prior to the experimental propulsion system ground test. A sounding rocket using the developed hybrid rocket was designed, fabricated, flight simulated and launch tested. Six degree-of-freedom trajectory estimation code was developed and the comparison result between expected and experimental trajectory validated the accuracy of the developed trajectory estimation code. The fabricated sounding rocket was successfully launched showing the effectiveness of the simplified hybrid rocket propulsion system.

• 자원리싸이클링
• /
• 제19권6호
• /
• pp.11-26
• /
• 2010

일본의 도시광산자원과 금속재자원화산업을 파악하기 위하여, 일본(日本)의 금속소비량, 금속리싸이클리률을 논하고, 철스크랩, 사용이 끝난 자동차, 폐가전제품 및 폐전자정보기지 등의 대표적인 재자원화산업의 개요를 조사하였다. 일본은 금속자원 소비대국이고 각종 금속 축적량 대국이기도 하다. 도시광산자원의 리싸이클링률은 자급률로 계산할 때 Pb 50%, Fe 33%, Al 25%이고, Hg, Au, Cd, Mn, Mo, Ag 등이 이어지고 있다. 그러나 기능재료에 첨가되는 레어메탈 및 REE 등은 리싸이클링 기술개발 단계라고 할 수 있다. 자동차, 가전제품 PC 등 사용이 끝난 제품의 리싸이클링산업은 활발하고, 리사이클링률은 법정기준치를 상회하고 있다.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.305-312
• /
• 2009

The effects of Quenching and Partitioning (Q&P) and Annealed Martensite (AM) heat treatment on the microstructure and tensile properties were investigated for 0.24C-0.5Si-1.5Mn-1Al steels. The Q&P steels were annealed at a single phase ($\gamma$) or a dual phase (${\gamma}+{\alpha}$), followed by quenching to a temperature between $M_s$ and $M_f$. Then, enriching carbon was conducted to stabilize the austenite through the partitioning, followed by water quenching. The AM steels were intercritically annealed at a dual phase (${\gamma}+{\alpha}$) temperature and austempered at $M_s$ and $M_s{\pm}50^{\circ}C$, followed by cooling in oil quenching. The dual phase Q&P steels showed lower tensile strength and yieldyield strength than those of the single phase Q&P steels, and tThe elongation for the dual phase Q&P steel was partitioning 100s higher than that of that for the single phase Q&P steels as the partitioning time was less than 100s up to partitioning 100s. For AM steels, the tensile/yield strength decreased and the total elongation increased as the austempering temperature increased. The stability of the retained austenite controlled the elongation for Q&P steels and the volume fraction of the retained austenite controlled the elongation for AM steels.

• 생태와환경
• /
• 제48권2호
• /
• pp.86-94
• /
• 2015

Chironomous is aquatic insect belonging to order Diptera, family Chironomidae. Their larval stage can be found mainly in aquatic benthic environment, hence good model organism to study environmental toxicology assessments and consider as useful bio indicators of contamination of the aquatic environment. In this study, Chironomus Heat Shock Proteins, Cytochrome 450, Glutathione S-transferase, Serine-type endopeptidase gene expressions were compared between polluted field areas (Chironomus plumosus) and under laboratory conditions (Chironomus riparious) to investigate molecular indicators for environmental contaminant stress assessment. Heavy metal (Al, Fe, Mn, Cu, Cr, Zn, Se, Pb, As, Cd) concentrations in sediments collected from three study areas exceeded the reference values. Moreover, HSPs, CYP450 and GST gene expression except SP for C. plumosus showed higher expression than C. riparious gene expression. Similar gene expression pattern was observed in C. riparious that exposed environment waters up to 96 h when compared to C. plumosus exposed to waters that grown in lab conditions. In summary, this comparative gene expression analysis in Chironomous between field and laboratory condition gave useful information to select candidate molecular indicators in heavy metal contaminations in the environment.

• 대한금속재료학회지
• /
• 제56권11호
• /
• pp.805-812
• /
• 2018

High pressure die casting is one of the precision casting methods. It is highly productivity and suitable for manufacturing components with complex shapes and accurate dimensions. Recently, there has been increasing demand for efficient heat dissipation components, to control the heat generated by devices, which directly affects the efficiency and life of the product. Die cast aluminum alloys with high thermal conductivity are especially needed for this application. In this study, the influence of elements added to the die cast aluminum alloy on its thermal conductivity was evaluated. The results showed that Mn remarkably deteriorated the thermal conductivity of the aluminum alloy. When Cu content was increased, the tensile strength of cast aluminum alloy increased, showing 1 wt% of Cu ensured the minimum mechanical properties of the cast aluminum. As Si content increased, the flow length of the alloy proportionally increased. The flow length of aluminum alloy containing 2 wt% Si was about 85% of that of the ALDC12 alloy. A heat dissipation component was successfully fabricated using an optimized composition of Al-1 wt%Cu-0.6 wt%Fe-2 wt%Si die casting alloy without surface cracks, which were turned out as intergranular cracking originated from the solidification contraction of the alloy with Si composition lower than 2 wt%.