• 한국환경보건학회지
• /
• 제13권1호
• /
• pp.67-71
• /
• 1987

This study was intended to investigate the content of Cu, Mn, Zn in the dried milk powders except infant formula milkpowder from January to March, 1986. The content of the trace metals was determined by Atomic Absorption Spectrophotometry. The results were as follows: 1. Averages of Cu, Mn, Zn in the total samples were Cu, 0.3043 ppm Mn, 0.5101 ppm Zn, 26.006 ppm. 2. Averages and ranges of Cu, Mn, Zu in the whole milk powder were Cu, 0.2483, 0.216 - 0.48 Mn, 0.552 ppm, 0.336 - 0.732 ppm Zn, 28.961 ppm, 7.5 - 51.9 ppm. 3. Averages and ranges of Cu, Mn, Zn in the skim milk powder were Cu, 0.4095 ppm, 0.3 - 0.54 ppm Mn, 0.6907 ppm, 0.348 - 0.84 ppm Zn, 38.381 ppm, 30.6 - 55.2 ppm. 4. Averages and ranges of Cu, Mn, Zn in the modified milk powder were Cu, 0.3459 ppm, 0.12 0.948 ppm Mn, 0.2414 ppm, 0.096 - 0.348 ppm Zn, 7.752 ppm, 1.2 - 17.002 ppm. 5. It showed the highest amount of Cu, Mn, Zu in the skim milk powder group than in the other group and the lowest amount of Cu in the whole milk powder group and Mn, Zn in the modified milk group.

• 한국주조공학회지
• /
• 제5권4호
• /
• pp.271-282
• /
• 1985

In order to investigate the mold reaction characteristics of Mn steel and Cr steel castings individually, the mold reaction products were examined by scanning electron microscopy, electron prove microanalyzer and X-ray diffractometer. From this experiment, the results were summarized as follows: 1) The mold reaction depth increased with increase of Mn content, while it decreased with increase of Cr content. 2) Mold reaction depth decreased with Mn content at $1200^{\circ}C$. 3) Mn, among the reaction products, forms a low fusion silicate, Mn $O.SiO_2$ while Cr forms a stable oxide, $CrO_3$ which hindering the reaction between FeO and $SiO_2$ thus the formation of $FeO.SiO_2$ was depressed.

• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.271-276
• /
• 2018

강의 부식을 방지하기 위해서 희생양극의 원리를 이용한 아연도금이 사용된다. 순수아연도금은 몇가지 문제점을 가지고 있어 얇으면서 내식성을 증가시키기 위한 방안의 하나로 Zn-Mn 합금도금이 연구되어지고 있다. Zn-Mn 합금도금은 도금 단가가 높음에도 불구하고 고내식성을 요구하는 자동차 부품 등에 적용이 가능하다. 본 연구에서는 산성 염화용액에서 Zn-Mn 합금도금을 전착하였다. 이때 염화욕에서 합금도금의 조성에 미치는 전해조건의 영향을 조사하였다. 전류밀도가 증가함에 따라 Zn함량이 감소하고 Mn함량은 증가하였다. 전해액의 온도가 증가함에 따라 Zn함량이 감소하고 Mn함량은 증가하였으며, 음극 분극곡선을 가지고 결과를 설명하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권1호
• /
• pp.24-27
• /
• 2011

Effect of substitution of Mn for Ni on transformation behavior, shape memory characteristics and superelasticity of Ti45Ni-5Cu alloy has been investigated by means of electrical resistivity measurements, X-ray diffraction, thermal cycling tests under constant load and tensile tests. The one-stage B2-B19' transformation occurred when Mn content was 0.5 at%, above which the two-stage B2-B19-B19' transformation occurred. A temperature range where the B19 martensite exists was expanded with increasing Mn content because decreasing rate of Ms (60 K / % Mn) was larger than that of Ms' (40 K / % Mn). Ti-(45-x)Ni-5Cu-xMn alloys were deformed in plastic manner with a fracture strain of 60 % ~ 32 % depending on Mn content. Clear superelasticity was found in fully annealed Ti-(45-x)Ni-5Cu-xMn alloys with Mn content more than 1.0 at%, which was ascribe to a solid solution hardening by substitution of Mn for Ni.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.27-39
• /
• 1990

The effect of silicon and manganese, in the ranges of 0.3% to 1.0wt% Si and 0.7 to 2.6wt%Mn, on the microstructure and mechanical properties of flux cored arc welded deposits have been investigated for the purpose of improving mechanical properties. Microstructure of weld metals was mainly influenced by manganese content, and manganese increased the volum fraction of acicular ferrite and refined the microstructure. Also, tensile properties were governed by manganese content, ultimate tensile strength and yield strength were increased by approximately 82MPa and 58MPa per 1% Mn addition to the deposit. Toughness was improved by increasing Mn content and lowering Si content. Optimal impact properties were obtained at above 1.8wt% Mn and below 0.5wt% Si. Acicular ferrite was predominant factor in improving mechanical properties. Formation of acicular ferrite was promoted by manganese and no direct relationship between AF(acicular ferrite) proportion and oxygen in weld metal was found.

• 한국자기학회지
• /
• 제2권3호
• /
• pp.222-227
• /
• 1992

소량의 $V_2O_5$ 첨가가 Mn-Zn 훼라이트의 치밀화, 미세조직 및 자기적 성질에 미치는 영향에 대하여 연구하였다. 최대밀도는 0.1 wt% $V_2O_5$ 첨가시 관측되며, $V_2O_5$ 첨가는 불균일입자성장을 억제하는 것으로 확인되었다. 초투자율은 0.1 wt% $V_2O_5$ 첨가시 최대값을 나타내었고, 손실은 0.03 wt% $V_2O_5$ 첨가시 최소값을 나타내었다. 소량의 $V_2O_5$ 는 Mn-Zn 훼라이트에 고용되지만, 일정량 이상이 되면 2차상을 형성하여 입계에 편석하였다.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.539-545
• /
• 2016

Alumina added with Mn3O4 up to 7.5 cat% of Mn was prepared by conventional ceramic processing, and the sintering behavior and the optical properties of which were studied as functions of Mn content. Densification and grain growth of alumina were enhanced by Mn addition up to 0.75 cat% but was leveled off at higher concentrations. XRD revealed that $Al_2MnO_4$(galaxite) was formed as a second phase in the specimens with more than 0.75 cat% of Mn. Thus it is believed that either the solid solution effect of Mn or the Zener effect of $Al_2MnO_4$ becomes predominant in the sintering of Mn-added $Al_2O_3$ according to the additive concentration. UV-VIS reflectivity(SCI) spectra of Mn-added $Al_2O_3$ consisted of smooth bottoms in 300~550 nm wavelength range and plateaus at wavelengths longer than 650 nm. The reflectivity spectrum continuously moved downward, and the specimen color became darker and thicker with increasing Mn content. The CIELAB color change with respect to standard white was also dependent on the amount of Mn added: ${\Delta}L^*$(D65) negatively increased and ${\Delta}E_{ab}^*$(D65) positively increased with increasing Mn content, probably due to Mn substitution to Al and/or the mixing effect of black $Al_2MnO_4$ as a second phase.

• 열처리공학회지
• /
• 제8권2호
• /
• pp.113-119
• /
• 1995

We have reported that an Fe-17wt%Mn alloy exhibits the highest damping capacity in the Fe-Mn binary system. In the present work, the effects of copper content on the damping capacity, atmospheric corrosion and mechanical properties were studied. The damping capacities were measured at room temperature for the air cooled Fe-17wt%Mn alloy having copper content from 0.1wt% to 1.1wt%. The damping capacity of the Fe-17wt %Mn alloy was decreased with increasing copper content. However, the addition of Copper was found to improve mechanical properties and atmospheric corrosion resistance. These mechanical properties were attributed to the formation of stress-induced martensite during tensile test.

• 열처리공학회지
• /
• 제10권3호
• /
• pp.209-217
• /
• 1997

Effect of Co content on the microstructure and damping capacity of Fe-23%Mn-X%Co alloy was studied. The volume fraction of ${\varepsilon}$ martensite of the alloy was increased with increasing Co content. The hardness was increased with lowering cooling temperature and increasing Co content in Fe-23%Mn-X%Co alloy, which is ascribed to the increase in ${\varepsilon}$ martensite content. The damping capacity of Fe-23%Mn-X%Co alloy was linearly increased with increasing the strain amplitude, and was constant regardless of Co content at the same volume fractions of ${\varepsilon}$ martensite when the low strain amplitudes ($1{\sim}3{\times}10^{-4}$) were applied, while the damping capacity with large strain amplitudes ($4{\sim}6{\times}10^{-4}$) became higher with increasing Co content at all valume fractions of ${\varepsilon}$.

• 한국초지조사료학회지
• /
• 제24권4호
• /
• pp.271-280
• /
• 2004

Orchardgrass 및 white clover에서 미량요소 Fe, Mn, Cu 및 Zn의 systematic variation 시비가 목초의 생육, 개화, 수량, 양분 함량 등에 미치는 영향 등을 구명하였다. 다량요소 양분을 동일량 시비한 조건에서 Fe/Cu(시험군-1), Mn/ Zn(시험군-2) 및 Fe+Cu/Mn+Zn(시험군-3) 시험에서는 systematic variation 방법으로 각 시험군 처리별 총 시비량을 0/100, 25/75, 50/50, 75/25, $100/0\% 비율로 나누어 시비처리 하였고, Fe/ Mn/Cu/Zn(시험군-4) 시험에서는 각 주성분의 처리 $70\%$, 기타 성분의 처리는 각각 $10\%$ (합계 $100\%$) 비율로 시비처리 하였다. 1. 처리별 목초 중 미량요소 함량은 일반적으로 white clover가 orchardgrass 보다 더 영향을 받았다 목초 중 Mn과 Cu-함량은 각 처리에 따라 뚜렷한 차이를 보였지만 Fe과 Zn-함량은 경미한 차이를 보였다. 2. Fe/cu 시험에서 white clover는 orchard-grass에 비해서 Cu-함량이 낮을 뿐만 아니라, 낮은 Cu 비율의 처리에서 Cu-함량과 수량이 심한 감소를 보였다. Mn/Zn 시험에서 $0/100\%$ 처리는 두 초종 공히 Mn-함량이 크게 감소되있고, 예취 회수가 갈수록 더 심해졌다. 특히 white clover는 본 1과 2보에서 언급한 Mn-결집 증상과 더불어 생육, 개화 및 수량이 불량한 것과 연관되었다. 3. Fe+Cu/Mn+Zn 시험에서는 처리별 Mn과 Cu-함량만 상대적으로 크게 차이를 보였다. 0/100과 100/0 처리에서 Cu와 Mn-함량이 각각 크게 낮아졌고, 이와 연관하여 특히 white clover는 생육, 개화 및 수량이 불량하였다. 낮은 Cu 및 Mn 시비의 부정적인 영향은 white clover가 orchardgrass보다 더 크게 나타났다. 4. Fe/Mn/Cu/Zn 시험에서는 처리된 각 주성분의 함량이 증가하였으며 특히 Mn-함량이 크게 증가하였다. 또한 각 주성분 처리($70\%$)에 따른 이들 함량의 증가는 다른 부성분($10\%$ 처리)들의 함량에 다소 부정적인 영향을 준 것으로 보였다.