• Journal of Welding and Joining
• /
• v.7 no.2
• /
• pp.49-59
• /
• 1989

The effect of non-metallic inclusions on the HAZ hydrogen induced cracking was investigated. Quench and temper high tensile strength steels containing various sulphur contents were employed. The sulphur contents range between 0.007% and 0.040%. Non-metallic inclusions were mainly MnS type sylphide and Mn-Al-Si type. The sensitivity of HAZ delayed cracking was evaluated by implant testing. Diffusible hydrogen content was varied by controlling the moisture absorbing condition of manual arc welding electrodes. The one was asreceived condition, the other was dipping the electrodes in the water for ten minutes. The main results obtained were as follows; 1) The results of implant test showed that critical stress increased with increasing S content up to 0.013%. But steel containing 0.040%S showed lower critical stress than that of 0.013% S. These result suggest that there will be optimum S content to prevent HAZ delayed cracking of high strength steels. 2) Under the lower D.H.C. level, critical stress was increased with rolling reduction, but higher D.H.C. level, effect of rolling reduction was not recognized.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.183-192
• /
• 2004

This pot experiment was conducted to investigate the effects of systematic variation application of Fe, Mn, Cu, and Zn on forage performance of orchardgrass and white clover. The treatments of systematic variation were 0/100, 25/75, 50/50. 75/25, and $100/0\%$ in the Fe/Cu(trial-1). Mn/Zn(trial-2), and Fe+Cu/Mn+Zn(trial-3), respectively The treatments of Fe/Mn/Cu/Zn(trial-4) were composed of $70\%$ for main element and $10\%$ for other 3 elements, respectively. 1. The contents of N-compounds in forages tended to be in inverse proportion to the yields. In the Mn/Zn trial, the 0/l00 to white clover resulted in the relatively high contents of soluble N-compounds and low ratio of pure protein/soluble N-compounds in company with a severe yield decrease. 2. In the Fe+Cu/Mn+Zn trial, the 0/100 and 100/0 resulted in the somewhat high contents of N-compounds in white clover. It was likely to be caused by the concentration effect derived from yield decrease. In addition, the 100/0 resulted in the relatively high content of soluble N-compounds and low ratio of pure protein/soluble N-compounds. The protein synthesis in white clover was likely to be negatively influenced by the 100/0. 3. In the Fe/Mn/Cu/Zn trial, white clover showed the low contents of crude and pure protein at the 1st cut. It was likely to be caused by the unbalanced mutual ratios derived from the high application levels of each single element. 4. In white clover at the 5th cut, the 0/100 of Mn/Zn and 100/0 of Fe+Cu/Mn+Zn resulted in the relatively high content of K. It was likely to be caused by the concentration effect derived from yield decrease.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.141-145
• /
• 2001

The Mn$\_$80/Ir$\_$18.1/Pt$\_$1.9/ exchange bias layers (EBLs), which have a small amounts of Pt, exhibit a high value of H$\_$ex/. The Si/Ni-Fe/Mn$\_$80/Ir$\_$18.1/Pt$\_$1.9/ EBL shows the largest H$\_$ex/ of 187 Oe, which is equivalent to a exchange energy (J$\_$ex/) of 0.146 erg/cm$^2$. Mn$\_$80/Ir$\_$18.1/Pt$\_$1.9/ EBLS are estimated to have blocking temperature of about 250 $\^{C}$, which is higher than those of Mn-Ir EBLs and Mn-Ir-Pt EBLs with higher Pt contents. This result implies that a little addition of Pt element promotes thermal stability in the Mn-Ir-Pt EBLs. The chemical stability of Mn-Ir-Pt EBLs was characterized by potentiodynamic test, which was performed in 0.001 M NaCl solution. The current density of Mn-Ir-Pt films was gradually reduced with increasing Pt content. The present results indicate that the Mn-Ir-Pt with a small amount of Pt is suitable for an antiferromagnetic material for a reliable spin valve giant magnetoresistance device.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.30-35
• /
• 2006

A thorough study about the influences of Mn substitution for Fe on the microstructure and magnetic characteristics of $Fe_{73.5-x}Mn-{x}Si_{13.5}B_{9}Nb_{3}Cu_1$ (x = 1, 3, 5) alloys prepared by the melt-spinning technique has been performed. Nanocomposites composed of nanoscale $(Fe,Mn)_{3}Si$ magnetic phase embedded in an amorphous matrix were obtained by annealing their amorphous alloys at $535^{\circ}C$ for 1 hour. The addition of Mn causes a slight increase in the mean grain size. The Curie temperatures of the initial amorphous phase and of the nanocrystals phase decreased, while the Curie temperature of the remaining amorphous phase remained nearly constant with increasing Mn content. Soft magnetic properties of the crystallized samples have been significantly improved by a proper thermal treatment. Accordingly, the giant magnetoimpedance effect is observed and ascribed to the increase of the magnetic permeability, and the decrease of the coercivity of the samples. The increased magnetic permeability is resulted from a decrease in the magnetocrystalline anisotropy and saturation magnetostriction.

• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.537-542
• /
• 2004

$V_{2}O_{5}/TiO_{2}$ catalysts promoted with Mn were prepared and tested for selective catalytic reduction of NOx in $NH_3.$ The effects of promoter content, degree of catalyst loading were investigated for NOx activity while changing temperatures, mole ratio, space velocity and $O_2$ concentration. Among the various $V-{2}O_{5}$ catalysts having different metal loadings, $V-{2}O_{5}$(1 wt.%) catalyst showed the highest activity(98%) under wide temperature range of $200-250^{\circ}C.$ When the $V-{2}O_{5}$ catalyst was further modified with 5 wt.% Mn as a promoter, the highest activity(90-47%) was obtained over the low temperature windows of $100-200^{\circ}C.$ From Mn-$V_{2}O_{5}/TiO_{2}$, it was found that by addition of 5 wt.% Mn on $V_{2}O_{5}/TiO_{2}$ catalyst, reduction activity of catalyst was improved, which resulted in the increase of catalytic activity and NOx reduction. According to the results, NOx removal decreased for 10%, but the reaction temperature down to $100^{\circ}C.$

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.300-304
• /
• 2001

Effect of Cd addition on the fatigue properties of Al-Cu-Mn cast alloy was investigated by low and high cycle fatigue tests. With increasing Cd content, fatigue life and tensile strength were increased. It was found that the fatigue strength was 115MPa and the fatigue ratio was 0.31. Metallographic observation revealed that the fatigue crack initiated at the surface and propagated along the grain boundary. This propagation path was attributed to the presence of PFZ along the grain boundary. The tensile strength increased from 330MPa in the Cd-free Al-Cu- Mn cast alloy to 401MPa in the 0.15%Cd-containing alloy.

• Nutrition Research and Practice
• /
• v.5 no.6
• /
• pp.548-552
• /
• 2011

The purpose of this study was to estimate the daily manganese (Mn) intake of Korean children. This study was done using a three-day dietary intake survey of 257 Korean children (boys 123; girls 134). The Mn intake values were calculated based on a database that provides the Mn content of the frequently consumed Korean foods, alongside the food composition table provided by the Korean National Rural Living Science Institute. The average age, height, weight and body mass index of our subjects were 11.9 years, 155.4 cm, 48.9 kg and 20.2 kg/$m^2$ in boys and 11.9 years, 154.1 cm, 43.5 kg and 18.3 kg/$m^2$ in girls. The average daily energy intakes were 2,249.2 kcal in boys and 2,044.5 kcal in girls. Boys consumed significantly more Mn than girls, based on intake estimates of $4,585.3{\mu}g$ (117.6% of adequate intake) and $4,029.3{\mu}g$ (117.1% of adequate intake), respectively (P < 0.001). Boys had a Mn intake of $2,041.1{\mu}g$ per 1,000 kcal of energy consumption, whereas for girls this was at $1,983.9{\mu}g$ per 1,000 kcal. Neither group exceeded the tolerable upper intake level for Mn. The major food groups which contributed to Mn intake in our subjects were cereals (50.8%), vegetables (21.0%), seasonings (8.9%), and pulses (7.7%). Notably, boys derived a higher Mn intake through cereals and vegetable than did girls (P < 0.001, P < 0.05). The key food sources of Mn, in descending order, were rice, soybean curd, kimchi, black rice and cereals. We propose that the results of our study may be used as a basis for follow-up studies that examine the Mn intake of children.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.840-844
• /
• 2003

The main objective of this investigation is to improve the photoluminescent of $Zn_{2}SiO_{4}:Mn$ phosphors prepared by the sol-gel technique. We try to use adding a new co-dopan such as Cr and Ti. The calcination temperature of sol-gel technique(1100 $^{\circ}C$) was lower than that of the solid state reaction (1300 $^{\circ}C$). Under 147nm excitation, the maximum emission intensity was obtained when the concentration of Cr and Ti was 0.1mol% with respect to $Zn_{2}SiO_{4}:Mn$. In order to study the effect of co-dopant, the content of Mn and the ratio of water to TEOS were fixed at 2mol% and 36:1, respectively.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.117-122
• /
• 1997

Soils collected from pusan metropolitan city were analysed for Cu, Pb, Zn, Cd, Mn to determine their dispersion patterns, mode of occurrences and to investigate the pollution level of heavy metals by urbanization. Element couples of Zn-Cu and Pb-Cd showed good correlation respectively and pollution sources of Zn-Cu, and Pb-Cd were similar. Pb was highly enhanced in dense traffic areas. Soil chemistry around mineralized areas originating from basic host rocks are characterized by high content of Pb, Zn, Cu, Cd, Mn and As.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.836-842
• /
• 1998

In this experiment well-know additives for Mn-Zn ferrites CaO and {{{{ { SiO}_{2 } }} were added at various content and their effects on microstructures and magnetic properties with sintering atmosphere were examined. By adding up to 0.04wt% {{{{ { SiO}_{2 } }} and and 0.06wt% CaO the sintered density was increased and then decreased gra-dually. Higher sintered density and initial permeability were observed by adding both CaO and {{{{ { SiO}_{2 } }} than by adding CaO or {{{{ { SiO}_{2 } }} alone. Without any additives initial permeability and tan$\delta$/${\mu}$ decreased at 1000kHz as oxidation degree(${\gamma}$) increased.