• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.899-904
• /
• 1998

Interface reaction between LSMC and YSZ is discussed with chemical composition of LSMC. The reac-tivity between LSMC and YSZ increased with increasing Co amount and A-site deficient perovskite is very effective on reducing reactivity. The (La0.8Sr0.2)xMn0.8Co0.2O3 (X=0.9-1) composition is not reactive with YSZ in experimental range. The electrode reaction reaction resistance increases due to reaction product.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.29-32
• /
• 2007

Zinc gallate, $ZnGa_2O_4:Mn^{2+}$ co-doped with different concentrations of $Mg^{2+}$ (0.001- 0.5 mol%) was prepared by solid state synthesis method. These compositions were investigated for their photoluminescence and cathodoluminescence properties. The optimized composition $Zn_{0.990}Mg_{0.005}Ga_2O_4:Mn_{0.005}$ shows higher luminescence intensity compared to the parent phosphor. The intense green emission peak was found at 504 nm. The $Mg^{2+}$ doping does not affect much the decay time. It remains <10 ms for these compositions which make them potential candidate for application in TV screens.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.110-114
• /
• 2003

LiAl/sub 0.24/Mn/sub 1.76/O/sub 4-y/S/sub y/ (y=0, 0.02) were synthesized by the sol-gel method. Both structures were refined by Rietveld method, its structure refined as a cubic spinel, space group Fd-3m, a=8.17937(30) Å and 8.18331(19) Å respectively. Though it has been made a charge/discharge experiment above 20 times, there was no change of 3 V/4 V capacity degradation. It was considered that the volume change of MnO/sub 6/ octahedron induced by sulfur substitution plays a key role in keeping the 3 V/4 V capacity. The refined composition of the compound could be confirmed with the ICP analysis.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.506-508
• /
• 2001

The ferrite plating with applying power ultrasound waves of 19.5 kHz and 600W enabled us to encapsulate entirely MnZn ferrite cores for transformers with Ni$\sub$x/Zn$\sub$y/Fe$\sub$3-x-y/O$_4$coating. Supplying a NH$_4$OH solution during the plating broke the limit of the solubility of Ni ions to ferrite-plated films. The electrical resistivity of the NiZn ferrite coating increased with increasing the Ni and Zn content, reaching 2.3${\times}$10$\^$5/Ωcm at the composition of Ni$\sub$0.24/Zn$\sub$0.30/Fe$\sub$2.46/O$_4$. The saturation magnetization was 540 emu/㎤. As a result, the MnZn ferrite cores were successfully encapsulated with the NiZn ferrite coatings for an insulation layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1297-1299
• /
• 2009

A series of $Eu^{2+}/Mn^{2+}$ co-activated $Ba_{1.98-x}Sr_xZnS_3$ red emission phosphors was synthesized using the polymerizable complex method. The excitation spectra of the materials contain two wide bands centered at 345nm and 445nm, implicating their possible use for white LED lighting applications. In addition, substitution of Sr for Ba by 20% (x=0.4) improved drastically the emission intensity as well as the internal quantum efficiency compared to those for Sr-free $Ba_2ZnS_3:Eu^{2+}/Mn^{2+}$ phosphor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.374-378
• /
• 1999

Thin Films of BaYTiO system were Prepared by frequency (rf)/dc magnetron sputtering method. The preparation of target were accomplished by the mixed oxide method, and their composition consisted of the $Ba_{0.997}$ $Y_{0.003}$Ti $O_3$+0.5 $SiO_2$+x $M_{n}$O(x=0, 0.073, 0.1, 0.127, 0.154). The average particle size of (Ba,Y)Ti $O_2$ system ceramics with Mn $O_2$ additives increases as the amount of MnO additives increase and reaches the maximum grain growth when the amount of MnO is 0.127(mol%).).).).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.260-264
• /
• 1999

In this paper, the structural, dielectrial and piezoelectrical properties of 0.03Pb(Sb$\sub$1/2/Ti$\sub$0.495/)O$_3$+Xwt% MnO(x= 0, 0.3, 0.4, 0.5, 0.7) system ceramics were investigated as a function of the addition of MnO. As a result, the samples of 0.3wt% MnO content showed the highest mechanical quality factor(Qm) of 1487, and its dielectric constant and electro mechanical coupling factor(Kp) 1357, 54.3%, respectively. Therefore, the dielectrial and piezoelectrical properties of the composition ceramics were indicated as the materials suitable for piezoelectric transformer.

• Journal of Surface Science and Engineering
• /
• v.21 no.1
• /
• pp.3-9
• /
• 1988

An electroless plating both for normal orientation of HCP-structure of Co-P to the film plane was developed. An ammonical succinate-citrate bath containg MnSo4, NiSO4 was studied Ni was codeposited into the films in order to decrease the saturation magentization (MS) since low Ms is necessary to decrease the magentizing fild. Mn was also codeposited to increase perpendicular orentaon of Co-P film. Effects on film composition and magnetic properties were studid in connection with follwing four factors such as concentration of NiSo4 and MnSo4, bath temp and pH.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.912-918
• /
• 2002

Ni-Mn-Co-Fe oxide thick films were coated on an alumina substrate by screening printing technique. The microstructure and electrical properties of the thick films, as a function of composition and sintering temperature, were investigated. The components of the NTC thick films sintered at 1150${\circ}C$ were distributed homogeneously. On the other hand, in the case of the NTC thick films sintered at 1200 and 1250${\circ}C$, Co element was distributed homogeneously, but Ni, Mn and Fe elements were distributed heterogeneously, resulting in the formation of Ni rich and Mn-Fe rich regions. All the thick film NTC thermistors prepared showed a linear relationship between log resistance (log R) and the reciprocal of absolute temperature (1/T), indicative of NTC characteristics. At a given NiO and $Mn_3O_4$ content, the resistance, B constant and activation energy of $(Ni_{1.0}Mn_{1.0}Co_{1-x}Fe_x)O_4$ (0.25${\le}$x${\le}$0.75) and $(Ni_{0.75}Mn_{1.25}Co_{1-x}Fe_x)O_4$ (0.25${\le}$x${\le}$0.75) thermistors increased with increasing $Fe_2O_3$ content.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.219-227
• /
• 2017

Manganese (Mn) nodules in the Arctic Sea have been founded in the Kara Sea and Barents Sea, but mineral and chemical compositions have been rarely investigated. In this study, mineralogical and geochemical characteristics of Mn nodules obtained during the Arctic Expedition ARA07C in northern East Siberian Sea were identified, and then genesis of Mn nodules were estimated by using these characteristics. Main manganese oxide minerals constituting the manganese nodule were buserite, birnessite, and vernadite. The Mn nodules generally represent radiated and massive texture, and the layered texture was developed restrictively. The radiated texture, main feature of the manganese nodule in the East Siberian Sea, is mainly composed of cuspate-globular microstructure. Compared with the Mn nodules in Pacific and Indian Oceans, Mn nodules of the East Siberian Sea are abundant in Mn, but Fe is too scarce. There was no difference in the chemical composition and microstructures between outer and inner part of nodule. Therefore, nodules are most likely to have only one genesis during their growth, and all of nodules indicate the diagenetic in $Mn-Fe-(Cu+Ni+Co){\times}10$ ternary diagram. It is considered that the manganese nodules in the East Siberian Sea are characterized by high Mn contents because manganese contents in the Arctic Ocean were mainly resulted from river or coastal erosion and most of them are trapped in the Arctic Ocean.