• Asian-Australasian Journal of Animal Sciences
• /
• 제10권5호
• /
• pp.460-470
• /
• 1997

On an absolute straw diet, the effect of graded levels of green grass supplementation on intake, nutrient digestibility, rumen fermentation pattern and microbial N yield has been studied in cattle. Of the two trials conducted, 16 intact growing bulls of 304 kg weight and 32 months old, randomly allocated to four treatments in a completely randomized design in the 1st trial. While, in the, 2nd trial, four rumen cannulated local bulls of about 60 months old and 400 kg weight were used in a $4{\times}4$ Latin square design with four treatments in four periods. In both the trials, in addition to a mineral mixture, animals were supplemented with graded levels of naturally grown green grass of 0 kg (T1), 2 kg (T2), 4 kg (T3) or 6 kg (T4) to an ad libitum rice straw diet In the 1st trial, measurements were made on intake digestibility, growth rate, N balance and microbial N yield. While in the 2nd trial, in addition to the above parameters (except growth rate), rumen parameters were also studied. All levels of grass supplementation decreased the straw DM intake and increased the substitution rate. The rumen $NH_3-N$ concentration increased with the increase in grass level and ranges from 8-46 mg/l. The rumen pH and the rate and extent of DM degradability of straw were not affeceted by different rumen environments created by different levels of grass inclusion. At 48 h, straw DM degradability were 42, 44, 44 and 43% respectively for 0, 2, 4 and 6 kg grass supplementation daily. The whole gut digestibilities of DM, OM and ADF increased significantly (p < 0.05) only at 6 kg level daily. The microbial N yield was not affected by the levels of grass supplemented. The mean microbial N yield was 10 (SD 3.7) g/kg DOM apparently fermented in the rumen. The estimated minimum N loss and thus the maintenance requirement of tissue protein was 303 mg/kg $W^{0.75}/d$. All the animals lost live weight but 6 kg grass supplementation gave positive energy and N balances. Small amount of green grass supplementation is often recommended for optimization of rumen environment of a straw diet However, under the present experimental condition, no such beneficiary effect observed up to 6 kg (26% of DM intake) level of supplementation.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.321-327
• /
• 2006

This interlaboratory study was designed to evaluate protozoan test methods in water and to predict the major causes of deviation of the methods. Each of four laboratories with previous experience of protozoa analysis in water participated, and met the initial performance criteria of EPA 1623 method provided. The protozoan analysis procedure consists of filtrations, concentration, immunomagnetic separation, dyeing (staining) and counting with observation. We tested three different filtration equipments: capsule filter for 10 L of surface water, and high volume (HV) capsule filter and membrane filter for 100 L of finished water. When the recovery of each step of the procedure was evaluated with EasySeed, the commercial stock of each 100 Cryptosporidium and Giardia, immunomagnetic separation and filtration step were the most crucial steps affecting the stability of the recovery, especially for Cryptosporidium. There was no significant difference of recovery among the filtration methods. Recovery of protozoa from source water were evaluated with spiked EasySeed as matrix tests. The recoveries of Giardia increased significantly in the matrix tests compared those in the deionized water. We also applied red stained mixture stocks of Cryptosporidium and Giardia called ColorSeed as internal standards of water sample tests. The recoveries of both EasySeed and ColorSeed in samples tested were within the range of the criteria, however, the Giardia recoveries using ColorSeed decreased significantly. Further optimization study with ColorSeed will be necessary, considering the convenience of using the internal standard without additional sample analysis. The significant factors of the recovery variation were identified as the differences of laboratories as well as water quality and type of the stock for spiking. The results of this study emphasize the importance of the quality assurance program for protozoan analysis lab in water.

• 한국식품영양학회지
• /
• 제26권1호
• /
• pp.22-28
• /
• 2013

죽의 기능성 향상을 위하여 2:1:1:1의 배합으로 혼합한 한약재료(가시오가피, 숙지황, 산약, 백복령)와 닭가슴살 등의 재료를 사용해 한방 영양죽을 제조하였다. 한방 닭죽의 DPPH radical 소거능, SOD 유사활성, 맛의 선호도, cost는 수학적인 canonical model과 trace plot을 이용하여 분석한 결과, SOD 유사활성 이외에는 각 성분들이 독립적으로 작용하여 상호작용이 없는 선형 모델을 보여주었다. DPPH radical 소거능, SOD 유사활성, 맛의 선호도를 최대로, cost를 최소로 목적 범위를 설정하고, 각각의 canonical 계수를 이용하여 수적 최적화를 통하여 최적 배합비를 구한 결과, 한약 혼합물 101 g, 닭가슴살 38.66 g, 찹쌀 비율 41.34 g의 최적 배합비를 구하였으며, 이 배합비에 따른 맛의 선호도는 6.39, DPPH radical 소거능은 17.25 mgVCE/${\ell}$, SOD 유사활성은 2.25%, cost는 1,382.39 won으로 나타났으며, 여러 결과들 사이에 최적화된 한 값에 수렴하는 desirability는 0.714로 나타났다. 이는 한약혼합물이 많을수록 기능성 면에서는 높게 나타나지만 맛의 선호도면에서는 낮게 나타냈고, 닭가슴살의 경우에도 그 함량이 많을수록 맛의 선호도는 올라갔지만 그에 반해 cost가 높게 올라간 것을 반영한 결과로 사료된다.

• 한국식품영양과학회지
• /
• 제31권3호
• /
• pp.438-444
• /
• 2002

본 연구는 저지방 세절소시지의 제조원리를 이해하기 위하여 돈육의 후지로 부터 염용성 단백질을 추출하여 친수성 콜로이드와 상호결합의 최적조건을 설정하고 이를 저지방 육제품 제조기술에 응용하기 위하여 실시하였다. 모델 연구에서 사용된 요인 중에서 추출한 염용성 단백질과 친수성 콜로이드 혼합물의 pH에 따른 가열 겔의 특성을 조사한 결과, pH가 6.0이상이 되었을 때 탄력성이 있는 가열 겔을 생성할 수 있었고 친수성 콜로이드의 첨가량이 증가함에 따라 겔 강도가 증진되었다. pH가 높아짐에 따라 염용성 단백질과 친수성콜로이드와의 반응에 의한 가열 겔의 강도가 증진되어 pH 6.5에서는 친수성 콜로이드 첨가량이 증가할수록 겔 강도가 높았다. 친수성 콜로이드 중에서 kappa-CN이 겔 생성능력이 현저히 높은 반면 KF와 LBG은 겔 생성능력이 상대적으로 낮았다. 친수성 콜로이드의 첨가량에 따른 가열 겔의 강도는 pH에 상관없이 첨가량이 증가할수록 증가하였으나 pH가 6.0인 경우 1.0% 이상 첨가할 경우 유의차를 보이지 않았다. 가열온도에 따른 겔 특성은 pH와 상관관계가 있어서 pH가 6.0일 경우 가열온도의 증가에 따라 겔 강도의 차이를 보이지 않았으나, pH가 5.5 혹은 6.5일 경우 가열온도가 높아짐에 따라 겔 강도가 높은 경향이었다.

• 농약과학회지
• /
• 제5권2호
• /
• pp.1-12
• /
• 2001

다클론항체를 이용하여 환경 시료중 유기인계 살충제 acephate를 분석할 수 있는 경합적 간접효소면역측정법(competitive indirect ELISA)을 개발하기 위하여 분석물과 화학구조가 유사하며 hexanoic acid를 지닌 3종의 hapten을 합성하였다. 이들 hapten을 active ester 방법으로 담체단백질인 keyhole limpet hemocyanin과 접합시켜 면역원으로 사용하있고, bovine serum albumin과 접합시켜 homologous 혹은 heterologous ELISA를 위한 코팅항원으로 사용하였다. 생산된 항체들과 코팅항원을 최종선발하여 acephate 잔류분석을 위한 ELISA를 위하여 최적화하였다. 단백질의 농도가 $1{\mu}g/mL$인 코팅항원 (hapten-3-BSA)과 다클론항체 #8377를 16000배로 희석한 heterologous ELISA에서 최적화된 acephate의 $IC_{50}$ 값은 110 ng/mL이었고, 분석범위와 최소검출한계는 각각 $10{\sim}1000$과 4 ng/mL 이었다. Acephate의 주분해산물이고 살충제로 사용되는 methamidophos을 위시한 몇몇 유기인계 살충제의 항체에 대한 교차반응은 모두 0.02%이하였다. 이와 같은 결과는 본 ELISA가 농산물 및 환경시료중의 acephate 잔류분석을 위하여 편리한 방법이 될 수 있음을 시사한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.220-220
• /
• 2013

Surface-normal transmission electro-absorption modulator (EAM) are attractive for high-definition (HD) three-dimensional (3D) imaging application due to its features such as small system volume and simple epitaxial structure [1,2]. However, EAM in order to be used for HD 3D imaging system requires uniform modulation performance over large area. To achieve highly uniform modulation performance of EAM at the operating wavelength of 850 nm, it is extremely important to remove the GaAs substrate over large area since GaAs material has high absorption coefficient below 870 nm which corresponds to band-edge energy of GaAs (1.424 eV). In this study, we propose and experimentally demonstrate a transmission EAM in which highly selective backside etching methods which include lapping, dry etching and wet etching is carried out to remove the GaAs substrate for achieving highly uniform modulation performance. First, lapping process on GaAs substrate was carried out for different lapping speeds (5 rpm, 7 rpm, 10 rpm) and the thickness was measured over different areas of surface. For a lapping speed of 5 rpm, a highly uniform surface over a large area ($2{\times}1\;mm^2$) was obtained. Second, optimization of inductive coupled plasma-reactive ion etching (ICP-RIE) was carried out to achieve anisotropy and high etch rate. The dry etching carried out using a gas mixture of SiCl4 and Ar, each having a flow rate of 10 sccm and 40 sccm, respectively with an RF power of 50 W, ICP power of 400 W and chamber pressure of 2 mTorr was the optimum etching condition. Last, the rest of GaAs substrate was successfully removed by highly selective backside wet etching with pH adjusted solution of citric acid and hydrogen peroxide. Citric acid/hydrogen peroxide etching solution having a volume ratio of 5:1 was the best etching condition which provides not only high selectivity of 235:1 between GaAs and AlAs but also good etching profile [3]. The fabricated transmission EAM array have an amplitude modulation of more than 50% at the bias voltage of -9 V and maintains high uniformity of >90% over large area ($2{\times}1\;mm^2$). These results show that the fabricated transmission EAM with substrate removed is an excellent candidate to be used as an optical shutter for HD 3D imaging application.

• Weed & Turfgrass Science
• /
• 제5권3호
• /
• pp.136-143
• /
• 2016

본 연구에서는 캐슈넛 오일의 살조활성 특징을 파악하고, 유해조류를 보다 효과적으로 제어할 수 있는 혼합처리제를 개발하기 위하여 실시하였다. 공시된 시험 추출물중 anacardic acid 함량이 상대적으로 높은 Ana-A가 남조류 M. aeruginosa에 대한 살조활성이 가장 높았다. Ana-A는 전체적으로 녹조류보다는 남조류에 대해 더 높은 살조활성을 가지면서 폭넓은 살조활성스펙트럼을 보였다. Ana-A에 대한 남조류 종간 반응에 있어서는 Oscillatoria tenuis ($IC_{50}=0.19{\mu}g\;mL^{-1}$)가 가장 민감하였고, 녹조류 중에서는 Chlorella vulgaris가 상대적으로 가장 민감한 반응을 나타내었다($IC_{50}=4.54{\mu}g\;mL^{-1}$). Ana-A와의 혼합처리를 통해 효능이 상승되는 화합물을 탐색한 결과, MSB와 menadione은 매우 강한 상승작용을, citric acid는 약간의 상승작용을, chrysophanol, copper sulfate, quinoclamine 등은 상가적 작용의 활성을 나타내었다. 종합적으로 볼 때, anacardic acid 고함유 캐슈넛 오일은 처리량의 최적화와 상승작용을 가지는 MSB 또는 menadione과 같은 화합물과의 혼합처리를 통해 M. aeruginosa 및 O. tenuis가 발생하는 현장의 선택적 제어를 위해 환경 친화적인 살조제로서 유용하게 활용될 수 있을 것 같았다.

• 한국식품조리과학회지
• /
• 제32권3호
• /
• pp.307-315
• /
• 2016

Purpose: The central composition design was used to optimize the mixture conditions of black garlic extract. Methods: The response surface methodology (RSM) was carried out from concentration of black garlic extract ($X_1$) and the amount of the black garlic extract ($X_2$) as independent variables, and salts ($Y_1$), reducing sugars ($Y_2$), the content of total phenolic compounds ($Y_3$) and ABTS radical scavenging activity ($Y_4$) as dependent variables. We confirmed the conditions that salinity was minimized and reducing sugar, total phenolic compounds and ABTS radical scavenging activity had maximum values through the response surface analysis. Results: All results had saddle points in originally set up conditions hence, ridge analysis was carried out for narrowing the experimental area. The minimum salt concentration was 16.03% at black garlic extract concentration of $14.84^{\circ}brix$ and contents of 9.26%. Reducing sugar content had maximum of value 7.30 g/mL at $24.58^{\circ}brix$ and contents of 8.08%. Total phenolic compounds contents and ABTS radical scavenging activity had maximum values at black garlic extract concentration of 20.33 and $25.02^{\circ}brix$. The results indicate that addition of black garlic extract contributed to increased reducing sugar, phenolic compounds contents and antioxidant activity of the soy sauce, but the salt concentration was not significantly affected. Conclusion: Based on the results of RSM, the optimum ranges of addition conditions for lowering the salt concentration and, increasing the sensory and functional ability of soy sauce were as follows: black garlic extract concentration of $15-25^{\circ}brix$ and content of 7.8-9.3%.

• 환경생물
• /
• 제35권4호
• /
• pp.662-669
• /
• 2017

본 연구는 축산지역 비점오염원 저감시설로서 바이오갈대와 바이오여재를 이용한 저영향개발(LID)공법이 적용된 처리수에 대한 생태독성 평가를 수행하였다. 식생수로와 인공습지를 이용한 유입식 파일럿 플랜트와 침투도랑을 이용한 회분식 파일럿 플랜트를 제작하여 축산폐수처리장 시료를 대상으로 생태독성 시험을 수행하였고 처리 전 후의 오염원 저감율과 생태독성도와의 연계성을 평가하였다. 각 파일럿 플랜트는 바이오갈대와 바이오여재를 이용한 바이오공정으로 제작하였으며 대조군으로 일반갈대와 일반여재를 이용한 일반공정을 제작하였다. 본 연구결과, 유입식과 회분식 파일럿 플랜트 모두 일반공정보다 바이오공정이 적용된 경우 유출수의 COD, TN 그리고 TP 저감 효율이 더 높았다. 또한 HRT 24시간 LID 공법을 적용 후 물벼룩 독성도는 상당히 낮아졌으며 특히 회분식 파일럿 플랜트가 독성저감에 효율적인 것으로 나타났다. 바이오갈대와 바이오세라믹 등으로 구성된 LID 공법은 비점오염원 저감시설뿐만 아니라 가축분뇨 정화시설과 연계한 후속처리공정으로 생태독성을 고려한 수질관리에 효과적일 것으로 예상되며 향후 오염원과 독성도를 동시에 저감할 수 있도록 LID 공법 최적화 연구가 필요할 것으로 판단된다.