• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.88-94
• /
• 1997

The oxidation behavior of the NiCrAlY bond coat and thermal fatigue failure in the plasma-sprayed thermal barrier coating system, ZrO2.8wt%Y2O3 top coat/Ni-26Cr-5Al-0.5Y bond coat/Hastelloy X superalloy substrate, in commercial use for finned segment of gas turbine burner were investigated. The main oxides formed in the bond coat were NiO, Cr2O3, and Al2O3. It divided the oxide distribution at this interface into two types whether an Al2O3 thin layer existed beneath ZrO2/bond coat interface before operation at high temperature or not. While a continuous layer of NiO was formed mainly in the region where the Al2O3 thin layer was present, the absence of it resulted in the formation of mixture of Cr2O3 and Al2O3 beneath NiO layer. Analyses on the fracture surface of specimen spalled by thermal cycling showed that spalling occurred mainly along the ceram-ic coat near ZrO2/bond coat oxide layer interface, but slightly in the oxide layer region.

• Earthquakes and Structures
• /
• v.13 no.3
• /
• pp.255-265
• /
• 2017

In this paper, an efficient shear deformation theory is developed for wave propagation analysis in a functionally graded beam. More particularly, porosities that may occur in Functionally Graded Materials (FGMs) during their manufacture are considered. The proposed shear deformation theory is efficient method because it permits us to show the effect of both bending and shear components and this is carried out by dividing the transverse displacement into the bending and shear parts. Material properties are assumed graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents; but the rule of mixture is modified to describe and approximate material properties of the functionally graded beams with porosity phases. The governing equations of the wave propagation in the functionally graded beam are derived by employing the Hamilton's principle. The analytical dispersion relation of the functionally graded beam is obtained by solving an eigenvalue problem. The effects of the volume fraction distributions, the depth of beam, the number of wave and the porosity on wave propagation in functionally graded beam are discussed in details. It can be concluded that the present theory is not only accurate but also simple in predicting the wave propagation characteristics in the functionally graded beam.

• Structural Engineering and Mechanics
• /
• v.64 no.3
• /
• pp.361-379
• /
• 2017

In this article, the vibration behavior of double-bonded sandwich microplates with homogeneous core and nanocomposite facesheets reinforced by carbon nanotube and boron nitride nanotube under multi physical fields such as 2D magnetic and electric fields is investigated. Symmetric and un-symmetric distributions of nanotubes are considered for facesheets of sandwich microplates such as uniform distribution and various functionally graded distributions. The double-bonded sandwich microplates rest on visco-Pasternak foundation. Material properties of sandwich microplates are obtained by the extended rule of mixture. The sinusoidal shear deformation theory (SSDT) is employed to describe displacement fields of sandwich microplates. Also, the dimensionless natural frequency is obtained by classical plate theory (CPT) and compared with the obtained results by SSDT. It can be seen that the obtained dimensionless natural frequencies by CPT are higher than SSDT. In order to study the material length scale parameters, modified strain gradient theory at micro scale is utilized and then, the equations of motion are derived using Hamilton's principle. The effects of different parameters such as foundation parameters including Winkler, shear layer and damping coefficients, various distributions and volume fraction of nanotubes, core to facesheet thickness ratio, aspect and side ratios on the dimensionless natural frequencies are discussed in details. The results of present work can be used to optimum design and control of similar systems such as micro-electro-mechanical and nano-electro-mechanical devices.

• Clinical and Experimental Pediatrics
• /
• v.56 no.11
• /
• pp.477-481
• /
• 2013

Purpose: Ureaplasma colonization is related with perinatal complications in preterm infants. Little is known about the difference in virulence among various Ureaplasma urealyticum serovars. The aim of this study was to determine U. urealyticum serovars of preterm infants in order to assess whether any of the serovars were associated with bronchopulmonary dysplasia (BPD). Methods: Three hundred forty-four preterm infants with a gestational age less than 34 weeks admitted to Gangnam Severance Hospital neonatal intensive care unit from July 2011 to December 2012 were included in this study. Tracheal and gastric aspirations were conducted on infants to confirm Ureaplasma colonization. Ureaplasma colonization was confirmed in 9% of infants, of these, serovars were determined by real-time polymerase chain reaction. Results: A total of 31 infants (gestational age, $29.3{\pm}3.1$ weeks; birth weight, $1,170{\pm}790g$) were U. urealyticum positive. The Ureaplasma positive group treated for more days with oxygen and ventilation than the negative group (P<0.05). Histologic chorioamnionitis and moderate to severe BPD were more frequent in the Ureaplasma positive group than in the negative group (P<0.05). U. urealyticum isolates were either found to be a mixture of multiple serovars (32%), serovar 9 alone or combined with other serovars (39%), serovar 11 (26%), 2 (13%), 8 (10%), 10 (13%), and 13 (25%). No individual serovars were significantly associated with moderate to severe BPD and chorioamnionitis. Conclusion: This is the first study to describe the distribution of U. urealyticum serovars from Korean preterm infants. Ureaplasma -colonized infants showed higher incidence of BPD and chorioamnionitis.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.40-48
• /
• 1996

In this paper, a 40 dimensional segment vector with 4 frame and 7 frame width in every monosyllable interval was compressed into a 10, 14, 20 dimensional vector using K-L expansion and neural networks, and these was used to speech recognition feature parameter for CHMM. And we also compared them with CHMM added as feature parameter to the discrete duration time, the regression coefficients and the mixture distribution. In recognition test at 100 monosyllable, recognition rates of CHMM +${\bigtriangleup}$MCEP, CHMM +MIX and CHMM +DD respectively improve 1.4%, 2.36% and 2.78% over 85.19% of CHMM. And those using vector compressed by K-L expansion are less than MCEP + ${\bigtriangleup}$MCEP but those using K-L + MCEP, K-L + ${\bigtriangleup}$MCEP are almost same. Neural networks reflect more the speech dynamic variety than K-L expansion because they use the sigmoid function for the non-linear transform. Recognition rates using vector compressed by neural networks are higher than those using of K-L expansion and other methods.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.275-280
• /
• 2009

The direct incorporation of vanadium into the three-dimensional(3-D) cubic Ia3d mesostructure designated as V-KIT-6 was carried out hydrothermally using a Pluronic P123 and n-butanol as the structure-directing mixture, tetraethylorthosilicate(TEOS) as the silica source and $NH_4VO_3$ as the vanadium source. The obtained V-KIT-6 showed a very high specific surface area ${\sim}1,000m^2/g$ with tunable pore diameters in narrow distribution of sizes ~6.0 nm. The coordination and nature of V sites in V-KIT-6 are characterized by $^{51}V$-spin-echo NMR analysis. The calcined V-KIT-6 materials showed excellent catalytic activity in the direct oxidation of styrene using tert-butyl hydroperoxide(TBHP) as an oxidant.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.104-109
• /
• 2017

It is important to keep the distribution of the raw material mixture constant, in order to maximize the effect of the pre-mix type repair mortar, and it is also necessary to increase the performance of the mixer in order to minimize the deviation of the product. In this study, three kinds of mixer used in production sites were used to make repair mortar and the properties of each mortar were examined. As a result, it is confirmed to the difference in properties of pre-mix type repair mortar differ depending on the type of mixer, and the fluidized zone mixer showed relatively good results. In addition, it is preferable to set the mixing time to about 10 minutes to 15 minutes in order to ensure workability and optimum physical properties.

• The Korean Journal of Pain
• /
• v.22 no.1
• /
• pp.52-57
• /
• 2009

Background: Transforaminal epidural injection (TEI) may be useful to treat unilateral pain that has a dermatomal distribution. In this approach, the needle tip can be placed closer to the dorsal root ganglion and ventral aspect of the nerve root. However many studies have reported that serious complications following TEI occurred more frequently when it was conducted at the cervical level. One of the presumptive mechanisms of the complication is intravascular injection. Therefore this study was conducted to identify the incidence of complications in response to intravascular injections at cervical segments. Methods: This study included all patients, who visited our pain clinic and had radicular symptoms or herpes zoster associated pain. All procedures were conducted under fluoroscopic guidance with contrast enhancement by one of the authors. After the ideal needle position was confirmed by biplanar fluoroscopy, the blood aspiration through the needle hub was evaluated, and a 3 ml mixture of nonionic contrast (2 ml) with normal saline (1 ml) was injected at a rate of 0.3-0.5 ml/sec continuously under real time fluoroscopic visualization. We then classified the contrast spreading pattern as neural, simultaneous neural and vascular, or vascular. Results: A total 71 cervical TEIs were performed. In 26 cases (36.6%), the contrast only spread to the nerve sheath. However, 45 cases (63.4%) showed an intravascular spreading pattern, 37 (52.1%) of which showed a neural and vascular pattern and 8 (11.3%) of which showed only a vascular pattern. Conclusions: Approximately two thirds of the cases of cervical TEI were found to lead to intravascular spreading, which is much higher than the incidence reported in previous studies.

• The Korean Journal of Community Living Science
• /
• v.21 no.4
• /
• pp.509-515
• /
• 2010

The physicochemical properties of the lactic acid fermented rice flour prepared using ABT-L(mixture of Lactobacillus acidophilus, Bacillus longum, Streptococcus thermophilus) were investigated. The efficiency of deproteinizing of lactic acid fermentated rice was higher than soaking fermented rice. The structural properties of lactic acid fermented rice flour showed slightly decreased inner particle size but maintained regular structural form. Molar mass and molar size after being treated with soaking or lactic acid fermentation were decreased. Amylograms except for pasting temperature of lactic acid fermented rice flours or soaking fermented rice flours were more significantly decreased than the control sample. The ratio of flours passed through 100 mesh and 150 mesh sieves of lactic acid fermented rice flours were higher than soaking fermented rice flours. Lactic acid fermented rice flours being passed through 100 mesh sieves showed finer particle flours than those treated with soaking. These results showed that lactic acid fermentation, which can have a high efficiency on the deproteinizing of rice, contributed to the changes of particle size and its distribution of rice flour.

• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.277-283
• /
• 1992

Acid effects on the ICP-AES signals are studied as the concentrations of nitric acid, hydrochloric acid, sulfuric acid, and 1:1 mixture of nitric acid and hydrochloric acid are changed. Almost all analyte signals are depressed. The extent of the depression due to the pressence of the acids became to be pecular when the acid concentration was over 1%. Among the acids used, the suppression due to sulfuric acid is most severe and unexpectable. The ratios of the analyte signal to Ar signal and the Mg II signal to Mg I signal are measured as the concentration of the acids changed. In this study, it is proved that the main reason of the signal reduction is the change in the nebulization efficiency, for example, droplet size distribution, viscosity and surface tension variation, not the alteration of plasma excitation characteristics. There was no relationship found between ionization potential and analyte signal reduction in ICP-MS.