• 한국초등과학교육학회지:초등과학교육
• /
• 제34권4호
• /
• pp.419-433
• /
• 2015

Analogical reasoning is a central component of human cognition and contributes to scientific discovery and to develop science education. In this study, we investigated the process features of lower elementary school students' analogical reasoning to explain mixture concept. The subjects are 24 lower elementary students. And the research design includes three phases instruction to investigate the features of students' self generated analogy. Phase 1 is the introduction of analogy in which student learn to use analogy. Phase 2 is a POE class about mixture conception. Piaget and Inhelder studied the conception of mixing among children in relation to cognitive development. In phase 2, we taught the student with Piaget and Inhelder's the experiment and observed the features of learning process about mixture conception. Phase 3 is students' generation of analogy (self generated analogy) for the experienced phenomena in phase 2. We analyzed the students' responses through the three phases in the view of Gentner's Structure Mapping Theory. The results showed that many lower elementary school students even before formal operation stage understood the mixture conception and made well their self generated analogy to explain the mixture conception in spite of the difficulty of making self generated analogy.

• 산업식품공학
• /
• 제15권4호
• /
• pp.297-304
• /
• 2011

혼합물실험계획법(mixture experimental design)을 적용하여 라면 밀가루 혼합비를 최적화하였다. 밀가루 혼합비를 최적화하기 위하여 전체 기호도(overall palatability)의 최대화, 반죽 레올로지 특성의 특정 범위 유지를 최적화의 목적으로 설정하였다. 라면은 가장 보편적인 미국산 밀가루 중 강력분인 DNS, 중력분인 HRW, 박력분인 SW를 simplex-lattice 방식에 의해 혼합비를 달리하여 제조하였다. 각 시료는 Rapid Visco Analyser(RVA), 파리노그래프, 익스텐소그래프를 이용하여 반죽의 레올로지 특성치를 측정하였으며, 조리된 라면의 전체 기호도를 관능 검사 하였다. 정준상관분석(canonical correlation analysis)를 통하여 RVA의 최고점도(PV), 파리노그래프의 반죽형성시간(DT), 익스텐소그래프의 R/E 45 min을 주요 반죽 레올로지 특성치로 선발하였다. 최적화 목적으로 전체 기호도의 최대화와 최고점도(PV)(최대화), 반죽형성시간(DT)(최소화) 및 R/E45 min(최대화)를 지정하였다. 그 결과 최적화된 밀가루 혼합비는 DNS 33.3%, HRW 33.3% 및 SW 33.3% 이였으며, 이때 전체 기호도는 5.825, 최고점도(PV)는 587.9 cP, 반죽형성시간(DT)은 3.1 min, R/E 45 min는 2.339 BU/mm로 나타났다.

• 품질경영학회지
• /
• 제52권2호
• /
• pp.377-394
• /
• 2024

Purpose: To derive the optimal conditions for the Rubber based colloidal suspension manufacturing process, which made using a stirrer, to apply the mixture design method. Methods: We used two process component and one process variable Mixture design to derive the optimal conditions for the process. The response variables were selected for rotational viscometer measures which can represent Rubber based colloidal suspension quality. The input variables were selected as the values of rubber-organic solvent expressed in proportions as process components and stirring amount as a process variable which are controllable factors in the process. Results: Based on the results of the experiment, rubber and organic solvent and the interaction between stirring amount and rubber and the interaction between stirring amount and rubber and organic solvent were significant. Reproducibility of the regression model was confirmed by the observation that the values obtained from the reproducibility experiment fell within the confidence interval. Additionally, the model predictions were found to be in close agreement with the field measurements. Conclusion: In this study, a regression model was developed to predict the viscosity change of colloidal suspensions based on the proportion of rubber based colloidal suspension. The developed regression model can lead to improved product quality.

• 토지주택연구
• /
• 제10권4호
• /
• pp.51-59
• /
• 2019

The government is encouraging the notice of obligatory reclaimed asphalt as a result of the economic and social positioning of green growth to reduce the amount of waste resources and to solve natural resource problems by recycling continuously generated waste resources. However, it is necessary to develop application guideline for each application to apply reclaimed asphalt to the site because quality control of the reclaimed asphalt is difficult and the specifications are ambiguous as well. Therefore, in this study, the mix design, quality test, performance test, and finite element analysis about reclaimed Asphalt Pavement were conducted to develop application guideline for reclaimed hot asphalt. The mix design was carried out for the comparative general hot mix asphalt mixture, the reclaimed hot mix asphalt mixture using the additive, and the reclaimed hot mix asphalt mixture without the additive. Indirect tensile strength and tensile strength ratio tests were used to characterize the reclaimed hot mix asphalt mixture. Using the results of dynamic modulus test and FWD test for KPRP analysis and finite element analysis, the performance life was evaluated for general pavement and pavement using recycled aggregate. Finally, the life cycle cost analysis was used to compare and analyze the economics of reclaimed asphalt concrete pavement.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.107-116
• /
• 2013

PURPOSES: The liquid-type chemical warm-mix asphalt (WMA) additive has been developed. This study evaluates the basic properties of the additive and the mechanical properties of WMA asphalt and mixture manufactured by using the newly developed chemical additive. METHODS: First, the newly developed WMA additive was applied to the original asphalt by various composition of additive components and dosage ratio of additive. These WMA asphalt binders were evaluated in terms of penetration, softening point, rotational viscosity, and PG grade. Based on the binder test results, one best candidate was chosen to apply to the mixture and then the mechanical properties of WMA mixture were evaluated for moisture susceptibility, dynamic modulus, and rutting and fatigue resistance. RESULTS : According to the binder test, WMA asphalt binders showed the similar properties to the original asphalt binder except the penetraion index of WMA additive was a little higher than original binder. From the Superpave mix design, the optimum asphalt content and volumetric properties of WMA mixture were almost the same with those of hot mix asphalt (HMA) mixture even though the production and compaction temperatures were $30^{\circ}C$ lower for the WMA mixture. From the first set of performance evaluation, it was found that the WMA mixture would have some problem in moisture susceptibility. The additive was modified to improve the resistance to moisture and the second set of performance evaluation showed that the WMA mixture with modified chemical additive would have the similar performance to HMA mixture. CONCLUSIONS : Based on the various laboratory tests, it was concluded that the newly developed chemical WMA additve could be successfully used to produce the WMA mixture with the comparable performance to the HMA mixture. These laboratory evaluations should be confirmed by applying this additive to the field and monitoring the long-term performance of the pavement, which are scheduled in the near future.

• 한국응용과학기술학회지
• /
• 제41권2호
• /
• pp.318-328
• /
• 2024

본 연구에서는 수크로스 스테아레이트(SS)의 유화력과 가용화력을 좀 더 향상시키기 위해, sodium deoxycholate (SDOC)와 PEG-40 hydrogenated castor oil (HCO)와의 혼합 조성물을 구성하였다. 혼합물의 최적 조성을 구하기 위해 혼합물 실험 계획법을 도입하여 실험을 진행하고, 실험에서 얻은 데이터를 회귀 분석하여 혼합물 조성의 변화가 혼합물의 특성에 미치는 영향을 살펴보았다. SS에 SDOC만을 첨가했을 때 코코넛 오일에 대한 유화력이 가장 향상되고, HCO만을 첨가했을 때는 가용화력이 가장 향상된 반면, 에스테르 오일인 cetyl ethylhexanoate (CEH)에 대한 유화력은 SDOC와 HCO를 함께 첨가했을 때 가장 크게 향상됨을 알 수 있었다. 코코넛 오일 및 CEH 각각에 대한 유화력과 가용화력, 3개의 특성치에 대한 동시 최적화를 실시한 결과, 최적의 계면활성제 혼합 조성은 SS 0.7939, SDOC 0.0586, HCO 0.1475로 구해졌다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권3호
• /
• pp.133-142
• /
• 2006

본 연구에서는 레미콘 제품에 Mix Design Nomogram을 적용하여 배합변수에 따른 파괴에너지 예측뿐만 아니라 파괴에너지에 따른 배합변수 예측을 가능하도록 하는데 그 목적이 있다. Mix Design Nomogram 작성을 위한 실험은 레미콘 생산회사의 실제 시방배합표를 사용하였으며, RILEM 50-FMC 위원회에서 제안한 3점 휨 실험을 실시하였다. 그 결과, 레미콘 제품에 파괴에너지가 예측 가능한 Mix Design Nomogram의 적용 가능성을 확인하였으며, 이를 이용한 프로그램 개발로 레미콘 배합설계 자동화를 위한 가능성을 확인하였다.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.15-23
• /
• 2006

현재의 마샬 배합설계는 공극률, VFA. VMA와 함께 가열 아스팔트 혼합물의 현장 공용성과 관련이 적은 안정도와 흐름값을 포함하고 있다. 게다가, 안정도와 흐름값은 거의 대부분 기준값에 만족하며. 최적 아스팔트 함량(OAC)은 공극률, VFA, VMA와 같은 용적특성에 의해 결정되고 있다. 그러므로 많은 연구자들은 현장 공용성과 관계를 가지는 혼합물을 만들기 위하여 안정도와 흐름값을 대신할 수 있는 역학적 특성에 관심을 가지고 있다. 본 연구에서는 마샬 배합설계방법의 안정도와 흐름값을 대신하여 역학적 특성과 관련있는 변형강도$(S_D)$와 파괴에너지(FE)를 도입하는 배합설계를 제안할 것이다. Kim test로부터 소성변형 저항성과 상관성이 높은 변형강도$(S_D)$와, 간접인장시험으로부터 피로균열을 모사하는 파괴에너지 (FE)를 도입하였다. 현재의 배합설계방법과 제안한 배합설계 방법을 비교하기 위하여 4가지 아스팔트 흔합물을 사용하였다. 제안한 배합설계가 현재의 배합설계방법에 비해 OAC결정에 역학적 특성이 반영되는 결과를 볼 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2006년도 학술발표회 논문집
• /
• pp.105-114
• /
• 2006

There are several methods determining an appropriate performance grade of virgin binder, which is re(erred as design binder, in RAP contained bituminous mixture design process. However, difficulties have been experienced in utilizing the methods in the field application in Korea, because SHRP binder test, the key tests to determine a design binder, requires well-trained personnel, high price equipment, and time consuming process. Thus, the study investigated the relationship among the binder aging level, RAP contents, and rheologica1 properties of binder. The study results provide mix designer with a simple method in selecting an appropriate grade of virgin binder.