• Journal of the korean society of oceanography
• /
• 제37권1호
• /
• pp.10-19
• /
• 2002

The detailed structure of a tidal front and its ebb-to flood variation in the main tidal channel of the Kyunggi Bay in the mid-west coast of Korea were investigated by analyzing CTD data and drifter trajectories collected in late July 1999. A typical tidal front was formed in water about 60 m deep at the mouth of the channel. Isotherms and isohalines in the upper layer above the seasonal pycnocline in the offshore stratified zone inclined upward to the sea surface to form a surface front, while those in the lower layer declined to the bottom front. The location of the front is consistent with $100 S^3/cm^2$ of the mixing index H/U defined by Simpson and Hunter (1974), where H is the water depth and U is the amplitude of tidal current. The potential energy anomaly in the frontal zone varied at an ebb-to flood tidal cycle, showing a minimum at slack water after ebb but a maximum at slack water after flood. This ebb-to flood variation in potential energy anomaly is not accounted for by the mixing index. We conclude that on- and offshore displacement of the water column by tidal advection is responsible for the ebb-to-flood variation in the frontal zone.

• 대한토목학회논문집
• /
• 제26권6B호
• /
• pp.623-631
• /
• 2006

본 연구에서는 하상변화가 존재하는 자연하천에서의 물질거동을 해석하기 위한 주기적저장대모형을 개발하였다. 저장대 구조에 따른 저장효과를 살펴보기 위하여 자연하천의 특성을 고려한 4개의 주기적 여울-소 구조를 갖는 와 흐름에서 소금물과 염료를 이용하여 실험한 모형실험결과를 이용하였다. 염료실험 결과, 물질이동 및 혼합거동은 하상 및 하안의 구조에 영향을 받는 것으로 나타났다. 기존의 저장대분산모형이 주기적으로 변화하는 저장대 구조에 의한 이동 및 질량교환 효과를 정확히 재현하지 못하는 것에 비해서 경계변화에 따른 질량교환 효과를 보다 효과적으로 재현할 수 있는 주기적저장대모형은 모형 실험 결과를 잘 재현하는 것으로 나타났다. 새로운 저장대모형을 미국 텍사스주의 Sabin River에 적용하였으며, 그 결과는 실험을 통해서 수집된 농도분포를 잘 재현하는 것으로 나타났다.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.481-488
• /
• 2018

This study suggest the improvement of the CFRP adhesive mixing ratio about acoustic window to enhance SONAR performance. The CFRP of submarine is produced by allocation an acoustic window zone by the beam width of SONAR sensors. During the sea trial, SONAR system's bearing and range accuracy data is not in tolerance due to debonding phenomenon on CFRP. The inappropriate mixing ratio of adhesives caused that peeling phenomenon occurred in the acoustic window part, which is the reason for the deterioration of SONAR sensors performance. The report includes explanation of test procedure of SONAR, root cause analysis, CFRP manufacturing procedure, laboratory tests results, and proof of the performance at the sea trial.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.151-157
• /
• 2005

In the chemical, mineral and electronics industries, mechanically stirred tanks are widely used for complex liquid and particle mixing processes. In order to understand the complex phenomena that occur in such tanks, it is necessary to investigate flow field in the vessel. Most difficulty on the numerical analysis of stirred tank flow field focused particularly on free surface analysis. In order to decrease the dead zone and improve the flow efficiency of a system with free surface, this paper presents a new method that overcomes free surface effects by properly combining the benefits of using experiment and 3-D CFD. This method is applied to study the mixing flow in an agitated tank. From the results of experimental studies using the PIV (particle image velocimetry) system, the distribution of mixing flow including free surface are obtained. And these values that are expressed as a velocity vector field have been patched for simulating the free surface. The results of velocity distribution obtained by 3-D CFD are compared with those of experimental results. The experimental data and the simulation results are in good agreement.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.15-21
• /
• 2003

A common feature in the three-dimensional numerical model experiments of coastal discharge with simplified model and idealized external forcings is investigated. The velocity fields due to the buoyancy and flaw flux, are spreaded radiately and the surface velocites are much greater than the homegeneous discharges. The coastal dischargd due to the Coriolis force and flaw flux are shaped a anticyclical gyre (clockwise) and determined the scale of the gyre in the coastal zone, respectively. The bottom topography restricts a outward extention of the coastal fronts and it accelerates a southward flow.

• 천문학회지
• /
• 제8권1호
• /
• pp.35-39
• /
• 1975

Effect of the ratio of mixing length to the pressure scale-height ${\alpha}$=l/HP on the effective temperature has been investigated under some simplifying assumptions. The result is compared with that of the existing model calculations. The role of convection zone in the stellar evolution is briefly summarized.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.834-844
• /
• 2000

In this study, an off-design performance analysis procedure is developed based on Two-zone model and TEIS model. In Two-zone model, there are both primary zone and secondary zone for an isentropic core flow and an average of all non-isentropic streamtubes respectively. The level of the core flow diffusion in an impeller is calculated by using TEIS model which regards the impeller as two successive rotating elements in series. At impeller exit, the mixing process occurs with an increase in entropy, that is to say, a decrease in total pressure. In loss models including Two-zone and TEIS model, some empirical parameters have a great influence on overall performance curve. So these parameters' influences on the overall performance curve are investigated and compared with experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.88-93
• /
• 2000

In this study, the mixing process of two-phase flow generated by two jets with height difference is analyzed. The primary jet is jetted on the condition of the state mixed pulverized solid particles with air. The height difference between the main jet and the secondary jet is changed into three kinds(0, 32.5, 47.5mm). The velocity vector field, concentration field and turbulent properties of solid particles are measured by using 3-Dimensional Particles Dynamics Analyzer. As the height difference of two jets through the two nozzles increases, the solid particle recirculation zone and the dense zone in the combustion chamber become large. The solid particle concentration at the center of the combustion chamber gets dense because the particle velocity remains slow due to the existence of the solid particle recirculation zone. The particle concentration in the combustion chamber can also be influenced by the hight difference of two jets.

• 한국해양학회지
• /
• 제25권2호
• /
• pp.84-95
• /
• 1990

CTD, 해류계, 인공위성 영상사진을 이용하여 황해 중부의 조석전선 주변역을 조사 한 결과 몇 가지 물리적 특성을 알 수 있었다. 전선은 태안반도 끝 부분을 중심으로 하여 4월 중에 태양열에 의한 해표면 가열과 함께 나타나기 시작하여 8월에 가장 뚜렷 하며 11월에는 표층냉각과 함께 소멸한다. 전선의 북측에서는 전선을 가로지르는 조류 에 의하여 수온 염분의 조석주기 변화가 나타남으로써 전선구조를 보여준다. 경기만에 서 나타나는 전선은 통최상의 조석전선과 달리 한강에서 유출된 담수와 외양수의 만남 에 의하여 형성된다. 표층냉수의 중심에서는 조석혼합역이 연안으로부터 약 50 km 외 양하지 분포한다. 전선의 남측에서도 전선의 구조는 비슷하나 전반적으로 혼합 정도가 약하게 나타난다. 이 연안 혼합역의 연안쪽에서는 금강유출된 담수에 의하여 염분전선 이 좁은 범위에서 흥성된다. 이 염분전선 부근의 일부에서는 용승과 같은 현상이 관측 되었다.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.330-341
• /
• 1999

An experimental study for the two types of burners used in the non-oxidizing direct fired furnaces of the heat treatment process for the cold rolled plate has been carried out to investigate the combustion characteristics and the oxidization of the surface of steel plate. A steep temperature gradient and entrainment of residual oxygen were found near the heating surface in the flame of the nozzle mixing burner which has strong swirl velocity component. It was concluded that the elimination of the residual oxygen and the increase of the temperature of combustion gas on the heating surface are needed to enhance the performance of the burners for application to the non-oxidizing direct fired furnaces.