• Computers and Concrete
• /
• 제31권6호
• /
• pp.501-511
• /
• 2023

The strengthening efficiency of biopolymer treated soil depends on biopolymer type, concentration ratio, soil type, initial water content, curing time and mixing method. In this study, the physical and mechanical properties of xanthan gum (XG) treated kaolinite were investigated through compaction test, Atterberg limit test, triaxial test and unconfined compression test. The results indicated that the optimum water content (OWC) increased from 30.3% of untreated clay to 33.5% of 5% XG treated clay, while the maximum dry density has a slight increase from 13.96 kg/m³ to 14 kg/m³ of 0.2% XG treated clay and decrease to 2.7 kg/m³ of 5% XG treated clay. Meanwhile, the plastic limit of XG treated clay increased with the increase of XG concentration, while 0.5% XG treated clay can be observed the maximum liquid limit with 79.5%. Moreover, there are the ideal water content about 1.3-1.5 times of the optimum water content achieving the maximum dry density and curing time to obtain the maximum compressive strength for different XG contents, which the UCS is 1.52 and 2.07 times of the maximum UCS of untreated soil for 0.5% and 1% XG treated clay, respectively. In addition, hot-dry mixing can achieve highest UCS than other mixing methods (e.g., dry mixing, wet mixing and hot-wet mixing).

• 대한치과보철학회지
• /
• 제58권2호
• /
• pp.86-94
• /
• 2020

목적: 전통적인 알지네이트와 체적 안정성을 개선한 두 종류의 extended-pour 알지네이트에서 혼합 방법과 보관 시간에 따른 체적 안정성 차이를 평가하고자 한다. 재료 및 방법: 금속 주모형을 제작하여 한 종류의 전통적인 알지네이트와 두 종류의 extended-pour 알지네이트로 군 당 40개 씩(수동 혼합 20개, 자동 혼합 20개) 인상 채득 후 즉시, 2일, 5일, 6일 보관 기간에 따라 군당 5개씩의 석고 모형 제작하였고, 3D 테이블 스캐너로 모델 스캔 후 스캔 데이터를 중첩하여 변화량을 측정하였다. 통계 분석으로 일반선형모형을 사용하였고 Tukey의 방법으로 사후검정 시행하였다 (P < .001). 결과: 혼합 방법에 따른 정확도에서는 통계학적으로 유의한 차이가 없었고 모든 군에서 즉시 석고 주입한 경우 가장 적은 부피 변화를 보였다. 2일 보관 후 석고 주입 시 군 간에 통계학적으로 유의한 차이가 나타났고, 보관 5일 후 extended-pour 알지네이트의 경우 전통적인 알지네이트에 비해 더 높은 정확도를 보였다. 전통적인 알지네이트는 2 - 5일에서, extended pour alginate의 경우 5 - 6일에서 급격한 부피 변화를 보였다. 결론: 알지네이트의 혼합 방법은 체적 안정성에 영향을 주지 않으며, extended-pour 알지네이트가 전통적인 알지네이트보다 장시간 체적 안정성이 우수하나 가급적 빠른 시간 내에 석고를 주입하는 것이 권장된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1308-1310
• /
• 1997

Several methods for electrode fabrication of phosphoric acid fuel cell(PAFC) have been studied. The conventional methods that include a coating method and a rolling method, have disadvantages of a very complicated drying process and a hot pressing process for making a large electrode. In this study, to solve these problems, the mixing method of coating and rolling processes has been developed. In the mixing method, the electrode was coated on the electrode support and, after drying the coated layer, was rolled at room temperature and then sintered at $350^{\circ}C$. The single cell performances of the electrodes fabricated by several methods were examined and the mixing method appeared a good cell performance of 0.65 V, $260\;mA/cm^2$. Also the single cell with an area of $2000\;cm^2$ was manufactured and its performance attained 0.593 V, 300 A.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.37-45
• /
• 2006

In this study we present the numerical methods that can be used in visualization of the flow and mixing patterns in a cavity driven by a top lid. The basic flow field within the cavity has been obtained by using a simple numerical scheme. The invariant manifold also called unstable manifold was then attained to represent the mixing pattern within the cavity. It was shown that care must be taken in calculating the trajectories of the fluid particles especially near corners of the cavity. The numerical results show excellent agreement with those obtained experimentally by other research group.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.245-248
• /
• 2005

SCRamjet is the key technology for hypersonic flight over mach number 6. It is characterized by very short residence time in combustor because its internal flow is supersonic. In this short time, the whole process of combustion must be done. Especially numerical study of combustor is important because air-fuel mixing rate influences the performance of combustor. Various methods of air-fuel mixing enhancement are proposed. Among these, cavity injection method is selected to study in this paper. The numerical study is conducted with the variation of the cavity length at the fixed height of unit and jet injection on the downstream of cavity.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.119-126
• /
• 2007

In this study, we processed two procedures of application test of filler for fire-resistance utility that are new application methods of aerated concrete and properties test of aerated concrete according to mixing ratio because we investigated the better use of aerated concrete as filler for fireproof safety and we proposed basic data about standardization of mixing of aerated concrete. We measured flow and volume change of aerated concrete. And if its volume doesn't change, we added measuring unit weight and compressive strength. To test application of aerated concrete as filler for fireproof safety, we filled up aerated concrete to fireproof safety according to suitable mixing ratio. Then we measured maximum temperature of inner part of fireproof safety in accordance with the standard test of fireproof. According to the results, aerated concrete as filler for fireproof safety could be possibly used. So when we make aerated concrete, we should consider using an adding agent as well as a foaming agent.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.257-267
• /
• 2006

The earth retaining wall systems for excavation works in a populated urban area or a poor soil deposit can be limited due to various restriction. Thus there are various methods to be applied for them such as the soldier pile method, the diaphragm wall with counterfort and so on. In this study, the self-supported earth retaining wall using the DCM(Deep Cement Mixing) method, including its merits, demerits and some important characteristics occured in the design and the construction stage, was introduced. It might be reference for the other design and construction procedures using the DCM method.

• 한국의류학회지
• /
• 제32권3호
• /
• pp.505-516
• /
• 2008

Image which appears in fashion illustration on the late twentieth century is not the representative image as an equivalence to the real fashion styles but the virtual image which bears no relation to any reality. The purpose of this study is review the concept of virtuality and analyze in which way virtual image is expressed in fashion illustrations on the background of Jean Baudrillard's simulacre theory. In post-modem paintings the expression methods of image-virtualization were image mixing through photo-image appropriation, image overlapping, and the icons inserted unreasonably, the focus-out effect through scrubbing and the over-painting on the photograph. Image-virtualization in fashion illustration was expressed through image mixing and expression of image uncertainty. Image mixing was made by photo-image appropriation, image overlapping, connection of heterogeneous images and using interface image, and uncertain image was expressed through the expression of visual ambiguity and virtual movement.

• 한국항공운항학회지
• /
• 제15권3호
• /
• pp.57-62
• /
• 2007

In this paper, we attempted to produce the cloud forecast that use the numerical weather prediction(NWP) MM5 for objective cloud forecast. We presented two methods for cloud forecast. One of them used total cloud mixing ratio registered to sum(synthesis) of cloud-water and cloud-ice grain mixing ratio those are variables related to cloud among NWP result data and the other method that used relative humidity. An experiment was carried out period from 23th to 24th July 2004. According to the sequence of comparing the derived cloud forecast data with the observed value, it was indicated that both of those have a practical use possibility as cloud forecast method. Specially in this Case study, cloud forecast method that use total cloud mixing ratio indicated good forecast availability to forecast of the low level clouds as well as middle and high level clouds.

• ETRI Journal
• /
• 제41권5호
• /
• pp.658-669
• /
• 2019

For dual-channel time-frequency (TF) overlapped signals with low sparsity in underdetermined blind source separation (UBSS), this paper proposes an effective method based on interval probability to estimate and expand the types of mixing matrices. First, the detection of TF single-source points (TF-SSP) is used to improve the TF sparsity of each source. For more distinguishability, as the ratios of the coefficients from different columns of the mixing matrix are close, a local peak-detection mechanism based on interval probability (LPIP) is proposed. LPIP utilizes uniform subintervals to optimize and classify the TF coefficient ratios of the detected TF-SSP effectively in the case of a high level of TF overlap among sources and reduces the TF interference points and redundant signal features greatly to enhance the estimation accuracy. The simulation results show that under both noiseless and noisy cases, the proposed method performs better than the selected mainstream traditional methods, has good robustness, and has low algorithm complexity.