• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.567-574
• /
• 2013

An optical model is proposed in the white LED using phosphor and LED chip. In this paper a new model that describes the absorption rate and quantum efficiency with increasing the mixing ratio of phosphor in silicone, and the allotment of the phosphor absorption optical power in the several phosphor mixing in the silicone. Single phosphor in silicone from the optical measurement data before and after molding, the solution to get the blue optical power and the phosphor emission optical power is proposed. By these solution the absorption rate and the quantum efficiency was obtained. The model with single phosphor mixing in the silicone the validity was confirmed.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.731-741
• /
• 1997

동일한 원수에 대하여 탁도제거 지배인자를 변화시켜가며 임펠러 형태별 탁도제거효율을 비교함으로써 관습적으로 설계 운영해오던 혼화과정의 문제점과 정수장의 최적 혼화저건을 만족시킬 수 있는 혼화기의 임펠러 타입 및 체류시간에 대한 운전기준을 제시하고자 하였다. 실험결과 혼화기의 종류는 탁도제거 효율을 물론 정수장의 경제적 운영을 위한 전력비 절감에도 효과가 있는 것으로 판명되었다. 또한 혼화지와 혼화기 설계기준에 일반적으로 활용되어 오던 속도구매 G이외에도 원수의 단위체적당 필요한 혼화에너지를 제시하여 정수효율은 물론 정수장의 경제적 운영효과를 극대화시킬 수 있는 참고자료로 제시하였다.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.639-645
• /
• 2011

This study found that flotation efficiencies for removing algae and micro particles in raw water were optimized on mixing intensity and time of the mixing and flocculation conditions with a continuous DAF system. It is more efficient for mixing intensity at 23.1 $s^{-1}$ and time at 660 s(Gt value : 15246) to float flocculated floc with the raw water in M water treatment plant. Flotation efficiency was more than about 0.9 when operated pressure and A/S ratio were sustained at 5 $kg_f{\cdot}cm^{-2}$ and up to 0.056 $mL{\cdot}mg^{-1}$. The continuous DAF system made by the study could be continuously operated for 20 days and sustained not exceeding 4 NTU with raw water with low turbidity(13.4~9.8 NTU).

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.166-171
• /
• 2004

In this study, shape optimization of micro-static mixer with a cantilever beam was accomplished for mixing the mixing efficiency by using successive response surface approximations. Variables were chosen as the length of cantilever beam and the angle between horizontal and the cantilever beam. Sequential approximate optimization method was used to deal with both highly nonlinear and non-smooth characteristics of flow field in a micro-static mixer. Shape optimization problem of a micro-static mixer can be divided into a series of simple subproblems. Approximation to solve the subproblems was performed by response surface approximation, which does not require the sensitivity analysis. To verify the reliability of approximated objective function and the accuracy of it, ANOVA analysis and variables selection method were implemented, respectively. It was verified that successive response surface approximation worked very well and the mixing efficiency was improved very much comparing with the initial shape of a micro-static mixer.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.44-51
• /
• 2001

Sedimentation characteristics such as SS, $BOD_5$, COD removal efficiency of waste water in the toilet paper mill using milk carton were examined. Optimum dosage of coagulant, rapid mixing time and slow mixing time were determined by turbidity, SS, COD, $BOD_5$ and then equation for treatment efficiency was suggested. Mechanical strength of floc was determined by turbidity. For the coagulant, polyacrylamide (PAM) is more efficient for removing pollution than the aluminium sulfate. Effective mixing ratios of PAM and aluminum sulfate to remove pollution are 70:30 and 30:70. The lowest turbidity was showed when rapid mixing at 300 rpm after coagulant injection was applied. That which indicates the highest point of flocs mechanical strength.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.104-112
• /
• 1994

The scavenging efficiency has a great influence on the performance of a diesel engine, especially slow two-stroke diesel engines which are usually used as a marine propulsion power plant. And this is greatly affected by the conditions in the cylinder, scavenging manifold and exhaust manifold during the gas exchange process. There are many factors to affect on the scavenging efficiency and these factors interact each other very complicatedly. Therefore the simulation program of the gas exchange process is very useful to improve and predict the scavenging efficiency, due to the high costs associated with redesign and testing. In this paper, a three-zone scavenging model for two-stroke uniflow engines was developed to link a control-volume-type engine simulation program for performance prediction of long-stroke marine engines. In this model it was attempted to simulate the three different regions perceived to exist inside the cylinder during scavenging, namely the air, mixing and combystion products regions, by modeling each region as a seperate control volume. Finally the scavenging efficiency was compared with three type of scavenging modes, that is, pure displacement, partial mixing and prefect mixing.

• 한국추진공학회지
• /
• 제12권2호
• /
• pp.33-39
• /
• 2008

초음속 연소에서 혼합 효율을 높이면서 전압력 손실을 줄일 수 있는 혼합기에 관한 연구가 수십 년동안 진행되어 왔으며, 본 논문에서는 이를 만족할 수 있는 새로운 개념의 혼합기를 고안하여 그 성능을 수치해석을 통하여 분석하였다. 후면 계단 혼합기를 비교 대상으로 압력과 등밀도선, 유선구조를 분석하였다. 공동이나 탭에서 발생하는 충격파가 후류로 전파되는 것과 달리, 벤트 혼합기의 구멍에서 발생하는 충격파는 벤트 혼합기 끝단에서 형성되는 팽창파에 의해 전파되지 못하며, 후류부의 재순환 영역으로 인해 경계층이 증가하며 이로 인해 후면 계단 방식에 비해 약한 충격파가 형성된다. 따라서 충격파로 인한 전압력 손실을 줄일 수 있으며, 구멍을 통한 공기 유입은 다수의 재순환 영역을 형성하여 혼합 효율을 증대시킨다. 또한 후류부에서 유동 흐름이 전반적으로 안정화되는 것을 볼 수 있다.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.210-217
• /
• 2011

In results of accomplishing fundamental study to improve the flocculant-mixing of the Flash-Mixer in Onsan Water-Treatment Plant at the small cost, We obtained 8.9% of mixing-efficiency from the field data and 3.2% of the characteristic flow-ratio as the available maximum volume-ratio in this Water-Treatment Plant. The optimum elements with the deflector diameter of 400 mm and deflector angle of $145^{\circ}$ at the flow ratio of 3.2% could be obtained from the expanded study on the ground of the fundamental study. Finally, the efficiency could be improved about 510% from 8.9% to 45.4% and the average turbidity could be improved about 14%.

• 플랜트 저널
• /
• 제12권3호
• /
• pp.39-45
• /
• 2016

기존 벙커C유에 바이오중유 혼합비율을 50%, 80% 및 100%로 변화시키면서, 발전기 출력 320 MW, 380 MW 일 때 각각의 시간당 연료소비량을 측정하였다. 벙커C유 전소일 때의 시간당 연료소비량과 비교한 결과 발전기 출력 320 MW에서 바이오중유 혼합비율이 50%부터 100%까지 높아짐에 따라 시간당 연료소비량이 11.0%에서 20.4%까지 증가함을 알 수 있었다. 또한 발전기 출력 380 MW에서는 바이오중유 혼합비율이 50%부터 100%까지 높아짐에 따라 시간당 연료소비량이 12.0%에서 21.1%까지 증가함을 알 수 있었다. 더 나아가 측정된 시간당 연료소비량과 발전기 출력, 연료의 고위발열량을 이용하여 발전효율을 산출하였고, 발전기 출력 320 MW, 380 MW에서 모두 바이오중유 혼합비율이 50%부터 100%까지 높아지면서 발전효율은 감소함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1516-1521
• /
• 2004

Mixing in Y-channel micro mixer is analyzed through computational fluid dynamics. In the case of passive mixing, we investigate the effect of geometric parameters on the mixing efficiency, such as shape of throttling geometry and angle between two inlets. Mixing performance improves as two fluids join not just horizontally but both vertically and horizontally, and it also improves when channel follows throttling shapes. A numerical results substantiate the highly efficient mixing performance. It is highly beneficial to fabrication process since the proposed throttling geometry is simple, but allows high mixing ratio.