• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2001.11a
• /
• pp.33-38
• /
• 2001

The types of the multi-family housing are classified into the independent type, the mixed type and the public type by the approaching method. The characteristics of the independent type are the rear layout type(41.66%), the "ㅋ"type(56.14%), and the 2-room type(54.54%). In the mixed one, they are the front layout type(36.84%), the "ㄱ"type(42.10%), and the 1-room type(49.60%) and in the public one they are the front layout type(51.61%), the "ㅡ"type(41.99%). and the 1-room type(84.11%). It is found that the housing types are gradually tuned into the multi-family housing such as the independent house in the urban area due to changing the major independent type(82.60%) in the early of the 1990s to the public type(74.19%) in the end of the 1990s.

• The Journal of Information Systems
• /
• v.30 no.2
• /
• pp.57-78
• /
• 2021

Purpose In this study, first, we try to make embedding results that reflect the characteristics of both professional and general documents. In addition, when disparate documents are put together as learning materials for natural language processing, we try to propose a method that can measure the degree of reflection of the characteristics of individual domains in a quantitative way. Approach For this study, the Korean Supreme Court Precedent documents and Korean Wikipedia are selected as specialized documents and general documents respectively. After extracting the most similar word pairs and similarities of unique words observed only in the specialized documents, we observed how those values were changed in the process of embedding with general documents. Findings According to the measurement methods proposed in this study, it was confirmed that the degree of specificity of specialized documents was relaxed in the process of combining with general documents, and that the degree of dissolution could have a positive correlation with the size of general documents.

• Journal of ILASS-Korea
• /
• v.27 no.1
• /
• pp.36-41
• /
• 2022

In this study, the combustion instability characteristics according to the change in the hydrogen ratio in the fuel in the single nozzle system of the hydrogen-natural gas mixed gas turbine for power generation was analyzed using a three-dimensional finite element analysis-based Helmholtz solver. This combustor shows the instability characteristics in which mode transition occurs from a mode having a low amplitude near 70 Hz to a mode having a high amplitude of 250 Hz or higher as the hydrogen fraction in the fuel increases. The current modeling results are found to reasonably predict the main characteristics of the change in measured instability frequency and growth rate with the change in fuel composition.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.62-69
• /
• 1999

This paper presents a design method of dynamic positioning control system(DPS) for floating Platform with rotatable and retractable thrusters using H$\infty$ servo control design method. The norm band of uncertainty is captured by multiplicative perturbation between nominal model and reduced order model. A controller robust to the uncertainty is designed applying H$\infty$ synthesis. The control law satisfying robust stability and nominal performance condition is determined through the mixed sensitivity approach. The control algorithm was evaluated on the basis of computer simulation for a proposed DPS design method and experiments was carried out with an image processing method for measurement of DPS position in a water tank The results of overall experiments show that proposed control method will be good to keep at a specified position. And they are compared with the experimental results by LQG synthesis and H$\infty$ optimal control design method.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.11-22
• /
• 2019

In this paper, a Rankine source method is applied and validated to analyze the hydrodynamic response of a three-dimensional floating structure in the frequency domain. The boundary value problems for radiation and diffraction problem are solved by using a desingularized indirect boundary integral equation method (DIBIEM). The DIBIEM is simpler and faster than conventional methods based on the numerical surface integration of Green's function because the singularities of Green's function are located outside of fluid regions. In case of floating structure with complex geometry, it is difficult to desingularize the singularities of Green's function consistently. Therefore a mixed approach is carried out in this study. The mixed approach is partially desingularized except singularities of the body. Wave drift loads are calculated by the middle-field formulation method that is mathematically simple and has fast convergence. In order to validate the accuracy of the developed program, various numerical simulations are carried out and these results are analyzed and compared with previously published calculations and experiments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.129-133
• /
• 1968

The writer reviewed the cutting method of webbing practiced in major countries. Cutting rhythm Bar cutting to Point Cutting) should be chosen to approach as straight as possible, therefore the knot cuttings or the side cuttings should be 1, if possile. According to calculation, an arbitrary solution to a mixed cutting was undertaken, while another cutting method, of calculation 5 and 6, was taken by a prepared table. In no case, it was consequently possible to use an unmixed cutting rhythm. Sometimes, the cutting calculated from approximate value differs from desired result, tut this defference should not be taken too significant in practice.

• Structural Engineering and Mechanics
• /
• v.48 no.1
• /
• pp.41-56
• /
• 2013

Initiation and growth of delamination is a great concern of designers of composite structures. Interface elements with de-cohesive constitutive law in the content of continuum damage mechanics can be used to predict initiation and growth of delamination in single and mixed mode conditions. In this paper, an interface element based on the cohesive zone method has been developed to simulate delaminatoin growth of post-buckled laminate under fatigue loading. The model was programmed as the user element and user material by the "User Programmable Features" in ANSYS finite element software. The interface element is a three-dimensional 20 node brick with small thickness. Because of mixed-mode condition of stress field at the delamination-front of post-buckled laminates, a mixed-mode bilinear constitutive law has been used as user material in this model. The constitutive law of interface element has been verified by modelling of a single element. A composite laminate with initial delamination under quasi-static compressive Loading available from literature has been remodeled with the present approach. Moreover, it will be shown that, the closer the delamination to the free surface of laminate, the slower the delamination growth under compressive fatigue loading. The effects of laminate configuration on delamination growth are also investigated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.223-224
• /
• 2023

Optimal fleet management in the planning stage is one of the most critical activities that guarantee successful construction projects. In South Korea, the construction standard production rate database (CSPRD) is normally employed. However, when it comes to a trade-off problem that involves decision-making on optimal sets of equipment to perform a certain task, the method will require the planners' in-depth knowledge and experience regarding the target process and a time consuming estimation of the performance of every possible scenario must be conducted for the deduction of the optimal fleet management. On this account, this research paper proposes a lightweight method of using mixed integer nonlinear programming (MINLP) in multi-objective problems based on CSPRD-based mathematical equations to assist planners in the preplanning stage of choosing the optimal sets of types and size machinery to efficiently arrange the construction scheduling and budgeting.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.101-107
• /
• 2020

We propose a realistic seeing through visualization methods in mixed reality environment. When a user wants to see specific location beyond a wall in indoor environment. The proposed system recognizes and registers the selected area using environment modelling and feature-based tracking. Then the selected area is diminished and the specific location is visualized in real-time. With the proposed seeing through methods, a user can understand spatial relationship of the building and can easily find the target location. We conducted a user study comparing the seeing through method to conventional indoor navigation service in order to investigate the potential of the proposed seeing through method. The proposed seeing through method was evaluated in navigation time in comparison with conventional approach. The proposed method enable users to navigate target locations 30% faster than the conventional approach.

• Earthquakes and Structures
• /
• v.9 no.4
• /
• pp.789-830
• /
• 2015

The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (RC) slabs that provide an efficient rigid diaphragm action, no longer satisfy the seismic design check and have been retrofitted by adding or replacing URM walls with RC walls. Of late, also several new construction projects have been conceived directly as buildings with both RC and URM walls. Despite the widespread use of such construction technique, very little is known about the seismic behaviour of mixed RC-URM wall structures and codes do not provide adequate support to designers. The aim of the paper is therefore to propose a displacement-based design methodology for the design of mixed RC-URM edifices and the retrofit of URM buildings by replacing or adding selected URM walls with RC ones. The article describes also two tools developed for estimating important quantities relevant for the displacement-based design of structures with both RC and URM walls. The tools are (i) a mechanical model based on the shear-flexure interaction between URM and RC walls and (ii) an elastic model for estimating the contribution of the RC slabs to the overturning moment capacity of the system. In the last part of the article the proposed design method is verified through nonlinear dynamic analyses of several case studies. These results show that the proposed design approach has the ability of controlling the displacement profile of the designed structures, avoiding concentration of deformations in one single storey, a typical feature of URM wall structures.