• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.7-11
• /
• 1999

This experiment was conducted to investigate the effects of soil conditioners, such as lime, borax, poultry waste sawdust manure (P.W.S.M) and mixed oil cakes (M.O.C), on the rutin biosynthesis and the yield of buckwheat. The content of phosphorus ($P_2O_5$) in buckwheat plants before flowering was higher at before flowering than that of flowering time at all plots. The content of nitrogen (N), potassium ($K_2O$), calcium (CaO) and magnesium (MgO) was lower at before flowering than those of flowering time at all plots. The contents of rutin in buckwheat plant at flowering time was higher than that at before flowering content of rutin in leaf was higher than that in stem. The contents of rutin in buckwheat plant was the highest at the plot treated with borax (B) compared to other plots. Correlation between rutin and amino acid was positive in buckwheat leaf, while it was negative in buckwheat stem. The yield of buckwheat was 21 percent higher at the plot treated with borax than the plot applied with the other three ingredients.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.64-75
• /
• 1998

The purpose of this study is to produce high putity composite powder composed of Fe-oxide, Mn-oxide and Mn-ferrite having superior homogencity in composition and particle size distribution by co-roasting process. Binary component metal (Fe, Mn) chloride solutions were produced by dissolving mill scale and ferro-mangancse alloy in hydrochloric acid. These chloride solutions contained the impurities such as SiO$_{2}$, P, Al, Ca and Na, which were originated from the Fe/Mn source materials. The neutralization and polymeric coagulant method were adoped to refine the hydrochloric liquor. When pH is far below the isoelectric point (pH 2-3), the SiO$_{2}$ was the most effectively reduced element, while other impurities remained unchanged. By increasing pH above 3, most of the impurities could be reduced effectively due to the coprecipitation reaction. The polymeric coagulants such as poly vinyl alcohol, resin amine and ammonium molybdate were found to have no effect on the spray roaster designed by the authors. The produced oxide powders were confirmed to be mixtures of Fe-oxide, Mn-oxide and mn-ferrite. the powders were homogeneously mixed and the particle size increased sleeply with increasing co-roasting temperature.

• Resources Recycling
• /
• v.10 no.5
• /
• pp.29-35
• /
• 2001

This study was carried out to recover gold, silver and valuable metals from the printed circuit boards (PCBs) of waste computers. PCBs samples were crushed under 1 mm by a shredder and separated into 30% conducting and loft nonconducting materials by an electrostatic separator. The conducting materials contained valuable metals which were then used as feed materials for magnetic separation. 42% of magnetic materials from the conducting materials was removed by magnetic separation as nonvaluable materials and the others, 58% of non magnetic materials, was used as leaching samples containing 0.227 mg/g Au and 0.697 mg/g Ag. Using the materials of leaching from magnetic separation, more than 95% of copper, iron, zinc, nickel and aluminium was dissolved in 2.0M sulfuric acid solution, added with 0.2M hydrogen peroxide at $85^{\circ}C$. Au and Ag were not extracted in this solution. On the other hand, more than 95% of gold and 100% of silver were leached by the selective leaching with a mixed solvent (0.2M($NH_4$)$_2$$S_2$$O_3$,0.02M $CuSO_4$,0.4M $NH_4$OH). Finally, the residues were reacted with a NaCl solution to leach Pb whereas sulfuric acid was used to leach Sn. Recoveries reached 95% and 98% in solution, respectively.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.8-15
• /
• 2018

Solvent extraction behavior of light rare earth elements (Pr, Nd) and medium rare erath elements (Tb, Dy) in the HCl-PC88A-kerosene extraction system was investigated in order to separate high-purity light rare earths (Pr, Nd) and medium rare earths (Tb, Dy) in the mixed rare earth chloride solution. In the batch test step, it was confirmed that the separation efficiency was good when the extractant concentration (PC88A) was 0.5 M, the equilibrium pH after extraction was 0.8 to 1.0 (initial pH 1.3 of the feed), the concentrations of hydrochloric acid in scrubbing solution was set as 0.1 M, the concentrations of hydrochloric acid in stripping solution was set as 2.0 M or more. Based on the experimental data obtained from the batch test, the mixer-settler was composed as follows; 4 stages of extraction, 8 stages of scrubbing, 4 stages of stripping, and 3 stages of pickling organic solution. The Mixer-settler was operated for 180 hours, and the operating conditions were continuously adjusted to obtain the high-purity light/medium rare earths. Finally, the purity of light (Pr, Nd) and medium rare earth elements (Tb, Dy) was reached as 3 N class.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.867-872
• /
• 2002

This study was performed to investigate the optimum process conditions for manufacturing yeast extract from waste brewer's yeast using various enzymes. Contents of IMP, GMP, free amino acids, and crude protein of yeast extracts were measured by enzymes treatment. Crude protein contents of yeast extracts subjected to cell wall digestion enzyme treatment were 21.1, 33.6, and 28.0% for the control grouup, glucanase (0.5%, 12 h), and tunicase (1%, 18 h), respectively. Crude protein contents of yeast extracts subjected to protease treatment were 22.0, 30.8, and 29.8% for control group, bromelin (1%, 3 h), and protamex (1%, 3 h), respectively. Crude protein content of yeast extract subjected to glucanase and protamex mixed treatment was 34.4%. The total contents of IMP and GMP of yeast extracts subjected to G+P+A (glucanase+phosphodiesterase+adenyldeminase) and G+Pro+P+A (glucanase+protamex+phosphodiesterase+adenyldeaminase) treatments were 1,066 and 1,047 mg/100 g, respectively. The content of free amino acids of yeast extract was the highest (2,302 mg/100 g) in G+Pro+P+A treatment. Optimum concentration and process condition of enzyme treatment to obtain yeast extract with high IMP, GMP, and free amino acid content were in the order of glucanase (0.5%, 12 h), protamex (1%, 3h), phosphodiesterase (0.1%, 3 h) and adenyldeaminase (1%, 1.5 h) treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.446-455
• /
• 2020

Objective: Our recent series of laboratory- and large-scale experiments confirmed that under aerobic and anaerobic conditions, sodium metabisulfite (SMB) was effective in preserving nutrients and antioxidant capacity of highly perishable fruit and vegetable discards (FVD). Hence, the purpose of this study was to examine how partial inclusion of SMB-treated FVD in total mixed ration (TMR) influences in vitro ruminal fermentation, whole-tract digestibility, nitrogen metabolism, blood metabolites, and voluntary feed intake of sheep. Methods: The FVD were mixed thoroughly with 6 g SMB/kg wet biomass and kept outdoors under aerobic conditions for 7 days. Four TMRs including four levels of SMB-treated FVD (as-fed basis) at 0%, 10%, 20%, and 30% (equaling to 0%, 1.9%, 3.8%, and 5.7% on dry matter basis, respectively), were prepared as replacement for corn grain. The ruminal fermentation metabolites were studied using an in vitro gas production test. Four mature male Corriedale sheep were assigned at random to the 4 diets for two separate sub-experiments; i) digestibility trial with four 21-d periods, and ii) voluntary feed intake trial with four 28-d periods. Results: Inclusion of SMB-treated FVD in the TMR tended to quadratically increase partitioning factor. No effect was seen on total-tract digestibility of organic matter, ether extract, crude protein, and acid detergent fiber, except for neutral detergent fiber digestibility that tended to linearly increase with increasing SMB-treated FVD in the TMR. The progressive increase of FVD preserved with SMB in the diet had no effect on nitrogen metabolism. Treatment had no effect on serum antioxidant capacity and blood metabolites assayed. Voluntary feed intake was not impaired by inclusion of SMB-treated FVD in the TMR. Conclusion: It appears that FVD preserved with SMB can be safely incorporated into TMR as replacement of corn grain without impairment of nutrient metabolism and feed intake.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.154-161
• /
• 2015

A novel process has successfully been developed by overcoming major difficulties through the elimination of number of process steps involved in the Classical Transesterification reaction during the preparation of Fatty Acid Methyl/Ethyl Ester (FAME.FAEE) called biodiesel. The Classical process with cost intensive process steps such as the utilization of excess alcohol, needing downstream distillation for the recovery and reutilization of excess alcohol/cosolvent, unrecoverable homogenous catalyst which consumes vast quantity of fresh distilled water during the purification of the product and downstream waste water treatment before its safe disposal to the surface water body. The Novel Process FAME/FAEE is produced from any vegetable oil irrespective of edible or inedible variety using sonication energy. The novelty of the finding is the use of only theoretical quantity of alcohol along with a co-solvent and reduced quantity of homogeneous catalyst. Under this condition neither the homogeneous catalyst goes to the FAME layer nor is the distillation needed. The same ester also has been prepared in high pressure high temperature reactor without using catalyst at sub critical temperature. The quality of prepared biodiesel without involving any purification step meets the ASTM standards. Blended Biodiesel with Common Diesel Fuel (CDF) and FAME is prepared, characterized and used as fuel in the Kirloskar make CI Engines. The evaluation of the engine performance result of pure CDF, B05 biodiesel, B10 biodiesel of all types of biodiesel prepared by using the feedstock of Soybean (Glycine max) and Karanja (Pongamia pinnate) oil along with their mixed oil provides useful information such as brake power, brake thermal efficiency, brake specific fuel consumption, etc, and established it as ideal fuel for unmodified CI engine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.205.1-205.1
• /
• 2010

국내에서 발생하는 생활폐기물 발열량이 최근 3,000 kcal/kg 정도를 웃돌고 있고 사업장 폐기물의 경우는 4,000~7,000 kcal/kg 정도로 높아 이러한 가연성 폐기물 들은 자원화하여 에너지원으로 사용가능하다. 폐기물 자원화 기술의 하나인 가스화 기술을 적용하면 폐기물 내의 가연분은 CO, $H_2$가 주성분인 합성가스로 전환되어 화학원료 또는 발전원료로서 활용이 가능하다. 본 연구에서는 합성가스의 다양한 활용분야 중에서도 메탄올과 CO의 합성을 통해 얻어지는 초산제조 공정에서 폐기물의 가스화를 통해 발생되는 합성가스 내의 CO를 적용하여 기존 초산제조공정에서 필요한 CO를 생산하기 위해 소모되는 고가의 납사 원료를 절감하고자 하는 방안이 검토되고 있다. 초산은 CO와 메탄올($CH_3OH$)을 금속이온계 귀금속촉매 상에서 메탄올카본닐레이션(Methanol carbonylation)반응으로부터 합성되는 것으로, 초산에스테르, 염료, 안료, 의약품 등의 원료로 사용되는 화학원료이다. 일반적으로 초산을 제조하기 위해 사용되는 CO를 생산하기 위하여 납사(Naptha)를 가스화하는 부분산화공정을 이용하거나 촉매를 사용한 Steam reforming공정을 적용하고 있는데, 가스화 및 Steam reforming의 원료가 되는 납사가 고가이고, 원유가가 상승하면 납사의 가격도 상승할 수 있고, 결국 초산제조 비용의 상승을 초래할 수 있다. 폐기물의 가스화를 통해 발생하는 합성가스 내의 CO를 활용하여 초산제조의 원료로 사용할 수 있다면 초산제조 공정에서의 CO 제조 비용 절감 및 폐기물 자원화의 효과를 동시에 달성할 수 있을 것으로 생각된다. 본 연구에서는 초산제조의 원료로 폐기물의 가스화를 통해 발생한 합성가스 내의 CO를 적용가능성을 검토하기 위하여 사업장 폐기물 및 사업장폐기물과 폐유, 건조슬러지 등을 혼합한 복합폐기물의 가스화를 통해 CO의 발생 특성을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.8
• /
• pp.1068-1076
• /
• 1997

Emission control of acid exhaust gases from coal-fired power plants and waste incinerators has become an increasing concern of both industries and regulators. Among those gaseous emissions, SO$_{2}$ has been eliminated by a Spray Drying Absorber (SDA) system, where the exhaust gas is mixed with atomized limestone-water slurry droplets and then the chemical reaction of SO$_{2}$ with alkaline components of the liquid feed forms sulfates. Liquid atomization is necessary because it maximizes the reaction efficiency by increasing the total surface area of the alkaline components. An experimental study was performed with a laboratory scale SDA to investigate whether the scrubbing efficiency for SO$_{2}$ reduction increased or not with the application of a DC electric field to the limestone-water slurry. For a selected experimental condition SO$_{2}$ concentrations exited from the reactor were measured with various applied voltages and liquid flow rates. The applied voltage varied from -10 to 10 kV by 1 kV, and the volume flow rate of slurry was set to 15, 25, 35 ml/min which were within the range of emission mode. Consequently, the SO$_{2}$ scrubbing efficiency increased with increasing the applied voltage but was independent of the polarity of the applied voltage. For the electrical and flow conditions considered a theoretical study of estimating average size and charge of the atomized droplets was carried out based on the measured current-voltage characteristics. The droplet charge to mass ratio increased and the droplet diameter decreased as the strength of the applied voltage increased.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.