• 한국재료학회지
• /
• 제24권7호
• /
• pp.370-374
• /
• 2014

Inorganic pigments have high thermal stability and chemical resistance at high temperature. For these reasons, they are used in clay, paints, plastic, polymers, colored glass and ceramics. $CoAl_2O_4$ nano-powder was synthesized by reverse-micelle processing the mixed precursor(consisting of $Co(NO_3)_2$ and $Al(NO_3)_3$). The $CoAl_2O_4$ was prepared by mixing an aqueous solution at a Co:Al molar ratio of 1:2. The average particle size, and the particle-size distribution, of the powders synthesized by heat treatment (at 900; 1,000; 1,100; and $1,200^{\circ}C$ for 2h) were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized nano-particles increased with increasing water-to-surfactant molar ratio. The synthesized $CoAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), field-emission scanning electron microscopy(FE-SEM) and color spectrophotometry. The intensity of X-ray diffraction of the synthesized $CoAl_2O_4$ powder, increased with increasing heating temperature. As the heating temperature increased, crystal-size of the synthesized powder particles increased. As the R-value(water/surfactant) and heating temperature increased, the color of the inorganic pigments changed from dark blue-green to cerulean blue.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.365-370
• /
• 2021

In this research, we proceeded with research on plasma resistance of the cleaning process of APS(Atmospheric Plasma Spray)-Y₂O₃ coated parts used for semiconductor and display plasma process equipment. CF₄, O₂, and Ar mixed gas were used for the plasma environment, and respective alconox, surfactant, and piranha solution was used for the cleaning process. After APS-Y₂O₃ was exposed to CF₄ plasma, the surface changed from Y₂O₃ to YF₃ and a large amount of carbon was deposited. For this reason, the plasma corrosion resistance was lowered and contamination particles were generated. We performed a cleaning process to remove the defect-inducing surface YF₃ layer and carbon layer. Among three cleaning solutions, the piranha cleaning process had the highest detergency and the alconox cleaning process had the lowest detergency. Such results could be confirmed through the etching amount, morphology, composition, and accumulated contamination particle analysis results. Piranha cleaning process showed the highest detergency, but due to the very large thickness reduction, the base metal was exposed and a large number of contaminated particles were generated. In contrast, the surfactant cleaning process exhibit excellent properties in terms of surface detergency, etching amount, and accumulated contamination particle analysis.

• 대한화학회지
• /
• 제46권6호
• /
• pp.495-501
• /
• 2002

Sodium n-Octanoate(SOC)와 n-Octylammonium Chloride(OAC)의 혼합마이셀화에 대하여 연구하기 위하여 임계마이셀농도(CMC)와 반대이온 결합상수(B)값을 SOC의 겉보기 몰분율($\alpha_1$)을 변화시키면서 측정하였다. SOC/OAC 혼합시스템의 마이셀화에 대한 여러 가지 열역학적 함수값($x_i$, $Y_i$, $C_i$, ${\alpha}_i^M$ 및 ${\Delta}H_{mix}$)을 비이상적 혼합마이셀화 모델에 의하여 계산하고 분석하였다. 그 결과 이러한 혼합계면활성제의 마이셀화는 이상적 거동으로부터 큰 음의 벗어남을 알 수 있었다. 그리고 SOC,OAC 및 그들 혼합체($\alpha_1$=0.5)의 마이셀화에 대한 열역학적 함수값(${\Delta}G^0_m$, ${\Delta}H^0_m$ 및 ${\Delta}S^0_m$)을 계산하기 위하여 온도에 따른 CMC 및 B 값의 변화를 측정하였다. 이러한 변화로부터 계산한 열역학적 함수값을 상호 비교함으로써 순수 및 혼합계면활성제의 마이셀화에 대하여 분석하였다.

• 청정기술
• /
• 제23권3호
• /
• pp.302-307
• /
• 2017

본 연구는 오염현장에서 채취한 유류오염토양을 in situ 토양세정법으로 정화시 기술 적용성을 평가하기 위한 컬럼식 실험이다. 실험에 사용한 오염토양의 토성은 사토(sand)이었으며, 초기 TPH 오염농도는 $9,369mg\; kg^{-1}$이었다. 세정용액으로 0.1% Tween-80을 사용하였으며, 반응기로는 아크릴 원형컬럼과 유리 시린지컬럼을 사용하였다. 아크릴 원형컬럼 실험에서 0.1% Tween-80을 1 PV 주입하였을 때 토양 TPH의 35%가 제거되었고 이후 5 PV까지도 제거효율이 약 40% 정도로 큰 증가가 나타나지 않았으나 7 PV 주입하였을 때 약 60%가 제거되었다. 아크릴 원형컬럼 대신 유리 시린지컬럼을 사용하여 체류시간을 증가시키자 5 PV까지는 아크릴 원통컬럼을 사용한 경우보다 제거효율이 전반적으로 약 3 ~ 12% 높았으나 7 PV을 모두 주입하였을 때의 제거효율은 약 60%로 서로 차이가 없었다. 단독 alum과 alum+polymer 혼합응집제를 사용하여 폐세정액을 응집처리한 결과 최적 주입농도는 두 경우 모두 $150mg\;L^{-1}$인 것으로 나타났다. 응집처리한 Tween-80 폐세정액에 Tween-80을 0.1% 농도로 새로 용해하여 재사용 세정을 실시한 결과의 제거효율은 41.0%로 재사용하지 않은 0.1% Tween-80의 32.0% 보다 약 9% 높게 나타났다.

• 공업화학
• /
• 제27권5호
• /
• pp.516-520
• /
• 2016

농축세정제는 일반세정제의 2배~3배 농도의 계면활성제를 사용하여 제조하며, 계면활성제가 35~45% (w/w) 정도가 된다. 일반적으로 단일 계면활성제는 농도의존적으로 30~60% (w/w) 영역에서 액정상을 형성한다고 알려져 있다. 혼합 계면활성제 시스템인 약 40% (w/w) 전후 농도의 농축세정제는 외관이 불투명하거나 겔상의 액정상을 형성한다. 소비자가 선호하고 사용하기 적합한 제품화를 위해 투명상과 영하의 온도에서도 clear한 상을 얻기 위해서 하이드로트로프(hydrotrope)를 적용하였으며, 효과가 우수한 하이드로트로프는 1,6-hexanediol, adipic acid와 dipropylene glycol와 같은 분자 양말단에 친수기를 가진 타입이었다. 점도가 조절되고 저온에서 상안정성이 우수한 농축세정제를 제조하기 위해서는 우수한 하이드로트로프와 함께 LAS와 SAS 같은 친수기가 계면활성제 소수기의 중간에 위치한 secondary type의 계면활성제를 적용하는 것이었다. 양말단에 친수기가 있는 하이드로트로프와 secondary type 계면활성제를 혼합 적용함으로써 약 40% (w/w) 농도의 농축세정제의 액정형성을 방지할 수 있다. 본 기술의 적용으로 저온안정성이 우수하며 점도가 적당히 조절된 농축세정제의 제조가 가능하다.

• 대한화장품학회지
• /
• 제18권1호
• /
• pp.42-63
• /
• 1992

방부제와 계면활성제를 혼합 사용하였을 경우 미생물에 대한 방부력 변화를 검토하고자 Imidazolidinyl urea, Methylparaben, Imidazolidinyl urea와 Methylparaben 혼합체 3종의 농도에 따른 각 농도별 계면활성제 Tween 20, Tween60, Tween 80의 첨가가 S. aureus ATCC E. coli ATCC 10536, P. aeruginosa NCTC 10490에 대한 방부력에 미치는 영향을 실험하였으며, 아울러 제품내에서 Tween 60 계면활성제 농도에 변화를 주었을 때의 방부력 변화를 조사하였다. 1. S. aureus ATCC 6538 Methylparaben과 Imidazolidinyl urea 혼합체에 대해 내성을 전혀 갖지 않았다. 2. E. coli ATCC 10536은 Mithylparaben에 대하여 내성을 전혀 갖지 않았다. 3. Mithlparaben과 Imidazolidinyl urea 혼합체는 Gram 음성균, Gram 양성균에 넓은 향균 spectrum을 나타났다. 즉, 방부제는 단일 사용시보다 혼합 사용시 상승효과를 가졌다. 4. Imidazolidinyl urea는 Polyoxyethylene(20) Sorbitan fatty acid ester류에 의해 전혀 방부력에 영향을 받지 않는 반면에 시험균주 3종에 대해 내성이 잘 되었다. 5. Muthylparaben은 Polyoxyethylene(20) Sorbitan fatty acid ester류에 의해 불활성화가 큰 폭으로 나타났다. 6. 방부제 Methyparaben 0.2%를 함유하는 제품에 비이온 계면활성제 Tween 60의 량을 0.5, 1.0, 2.0%로 달리 첨가하였을시 D-value는 제품내 비이온 계면활성제 Tween 60의 량이 증가할수록 비례하여 커졌다. 즉, 비이온 계면활성제 Polyoxyethylene(20) Sorbitan monostearate에 의해 Methylparaben이 제품내에서도 불활성화 되었다.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.316-320
• /
• 2012

$Co_3O_4$, $Al_2O_3$ and $Co_3O_4$/$Al_2O_3$ mesoporous powders were prepared by a sol-gel method with starting matierals of aluminum isopropoxide and cobalt (II) nitrate. A P123 template is employed as an active organic additive for improving the specific surface area of the mixed oxide by forming surfactant micelles. A transition metal cobalt oxide supported on alumina with and without P123 was tested to find the most active and selective conditions as a heterogeneous catalyst in the reaction of styrene epoxidation. A bBlock copolymer-P123 template was added to the staring materials to control physical and chemical properties. The properties of $Co_3O_4$/$Al_2O_3$ powder with and without P123 were characterized using an X-ray diffractometer (XRD), a Field-Emission Scanning Electron Microscope (FE-SEM), a Bruner-Emmertt-Teller (BET) surface analyzer, and $^{27}Al$ MAS NMR spectroscopy. Powders with and without P123 were compared in catalytic tests. The catalytic activity and selectivity were monitored by GC/MS, $^1H$, and $^{13}C$-NMR spectroscopy. The performance for the reaction of epoxidation of styrene was observed to be in the following order: [$Co_3O_4$/$Al_2O_3$ with P123-1173 K > $Co_3O_4$/$Al_2O_3$ with P123-973 K > $Co_3O_4$-973 K>$Co_3O_4$/$Al_2O_3$-973 K > $Co_3O_4$/$Al_2O_3$ with P123-1473 K > $Al_2O_3$-973 K]. The existence of ${\gamma}$-alumina and the nature of the surface morphology are related to catalytic activity.

• Journal of Chest Surgery
• /
• 제33권2호
• /
• pp.125-131
• /
• 2000

Background: Hyperinflation during lung ischemia has been known to improve pulmonary functions after reperfusion which may be exerted through a pulmonary vasodilation and avoidance of atelectasis by an increased surfactant release and been known whether the improvement of pulmonary function was the effect of hyperinflation itself or the oxygen content in inflation gas. Therefore we attempted to clarify the effect of hyperinflation with oxygen in pulmonary inflation gas during warm ischemia on pulmonary function after reperfusion to solve the problem of ischemia-reperfusion injury after lung transplantation. Material and Method: sixteen mongrel dogs were randomly divided into two groups: the left lung was inflated to 30-35 cm H2O with 100% oxygen in oxygen group and 100% nitrogen in nitrogen group. The inflated left lung was maintained with warm ischemia for 100 minutes. Arterial and mixed venous blood gas analysis and hemodynamics were measured before ischemia and 30, 60, 120, 180 and 240 minutes afer reperfusion. Lung biopsy was taken for the measurement of lung water content after the end of reperfusion. Result: In oxygen group arterial oxygen tension the difference of arterial and mixed venous oxygen tension and the difference of alveolar-arterial oxygen tension at 30-minute after reperfusion were not significantly different from those before ischemia and were stable during the 40hour reperfusion. However in nitrogen group these values were significantly deteriorated at 30-minute after reperfusion. there was no significant difference between two groups in hemodynamic data peak airway pressure and lung water content. Conclusion : The results indicated that the oxygenation one of the most important pulmonary functions was improved by pulmonary inflation with 100% oxygen during warm ischemia but the hemodynamics were not. Oxygen as a metabolic substrate during warm ischenia was believed to make the pulmonary tissues to maintain aerobic metabolism and to prevent ischemic damage of alveoli and pulmonary capillary.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.547-553
• /
• 2006

안료가 칼라콘크리트의 성질에 미치는 영향을 알아보기 위해 산화철이 주성분인 적색, 황색 및 흑색 안료와 동 프탈로시아닌을 착색성분으로 하는 청색과 녹색 안료 5종류를 사용하여 모르타르와 콘크리트 실험을 실시하였다. 안료의 종류 및 첨가율에 따라 모르타르 및 콘크리트의 품질특성이 차이가 있었다. 적색, 황색 및 흑색 안료를 첨가한 콘크리트의 응결시간은 다소 빨라지고 압축강도는 약간 증가하는 경향이었으며, 슬럼프 및 공기량은 거의 같거나 감소하였다. 반면, 청색 및 녹색 안료를 첨가한 경우 계면활성제의 공기연행에 의해 콘크리트의 압축강도가 크게 저하하였으며, 슬럼프 및 공기량은 크게 증가하였다. 이들 청색 및 녹색 안료를 첨가한 콘크리트에 소포제를 첨가함으로써 콘크리트의 압축강도가 크게 개선되어 안료를 첨가하지 않은 콘크리트와 비슷한 강도발현이 나타났다.

• 대한가정학회지
• /
• 제35권4호
• /
• pp.257-268
• /
• 1997

The effects of water-and oil-repellent finishes on the deposition and removal of oily soils from polyseter fabrics were investigated in this study. The polyester fabrics treated with three kinds of fluoropolymers(TG-410H, TG-990) were soiled with mixed oily soils and washed by using Terg-O-Tometer at various conditions. It was found that TG-410H and TG-527 treated polyester fabrics reduced significantly the deposition of oily soils than untreated and TG-990 treated polyester fabrics. The removal of oily soils from polyester fabrics was increased in porportion to increasing of surfactant concentration up to a certain point(0.2% owb) but it levelled off above the point. The removal effect was high in the order of TG-990 treated polyester fabrics > untreated polyester fabrics > TG-527 treated polyester fabrics > TBG-410H treasted polyester fabrics. Especially the removal of oily soils from polyester fabrics was more effectively removed in triton X-100 solution. In general the removal of oily soils from polyester fabrics treated with fluoropolymers was increased up to a miximum near 6$0^{\circ}C$ and than decreased above 6$0^{\circ}C$. And efficient removal could be achieved within relatively short time (30min) The removal of oily soils from polyester fabrics was increased in proportion to increasing of pH range up to a certain point(9.5 or 11.0) but it began to decrease above the point. Furthermore the removal of oily soils was increased with th increase of mechanical agitation, but it began to decrease above 160 rpm.