• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2022

During the past decades, detection of gear defects remains as a major problem, especially when the gears are subject to non-stationary phenomena. The idea of this paper is to mixture a multilevel wavelet transform with a fast EMD decomposition in order to early detect gear defects. The sensitivity of a kurtosis is used as an indicator of gears defect burn. When the gear is damaged, the appearance of a crack on the gear tooth disrupts the signal. This is due to the presence of periodic pulses. Nevertheless, the existence of background noise induced by the random excitation can have an impact on the values of these temporal indicators. The denoising of these signals by multilevel wavelet transform improves the sensitivity of these indicators and increases the reliability of the investigation. Finally, a defect diagnosis result can be obtained after the fast transformation of the EMD. The proposed approach consists in applying a multi-resolution wavelet analysis with variable decomposition levels related to the severity of gear faults, then a fast EMD is used to early detect faults. The proposed mixed methods are evaluated on vibratory signals from the test bench, CETIM. The obtained results have shown the occurrence of a teeth defect on gear on the 5th and 8th day. This result agrees with the report of the appraisal made on this gear system.

• Journal of Sensor Science and Technology
• /
• v.32 no.1
• /
• pp.44-50
• /
• 2023

In this study, a polydimethylsiloxane (PDMS)-based drag force-type flowmeter was fabricated using a graphite-carbon nanotube (CNT) composite as a piezoresistive material and evaluated. The device was in the form of a cantilever, which was composed of the soft material, PDMS, and fabricated using a mold manufactured by a three-dimensional printer. The cost-effective graphite was mixed with CNTs to serve as a piezoresistive material. The optimal mixing ratio was investigated, and the piezoresistive material formed using a graphite:PDMS:CNT ratio of 1.5:1:0.01 was adopted, which showed a stable output and a high sensitivity. Various forward and backward air flows in the range of 0-10 m/s were measured using the fabricated flowmeter, and both tensile and compression characteristics were evaluated. The measured results showed a stable output, with the resistance change gradually increasing with the air flow rate. Repeatability characteristics were also tested at a repeated air flow of 10 m/s, and the flowmeter responded to the applied air flow well. Consequently, the fabricated device has a high sensitivity and can be used as a flowmeter.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.99-117
• /
• 2023

The crack under the influence of the higher intensities of the stresses grows and the structure gets collapsed with the time when the crack length reaches to critical value. Therefore, the fracture behavior of a structure in terms of stress intensity factors (SIF) becomes important to determine the remaining fracture strength and capacity of material and structure for avoiding catastrophic failure, increasing safety and further improvement in the design. The robustness of the method has been demonstrated by comparing the numerical results with analytical and experimental results of some problems. XFEM is used to model cracks and holes in structures and predict their strength and reliability under service conditions. Further, XFEM is extended with a stochastic method for predicting the sensitivity in terms of output COVs and fracture strength in terms of mean values of stress intensity factors (SIFs) of a structure with discontinuities (cracks and holes) under tensile loading condition with input individual and combined randomness in different system parameters. In stochastic technique, the second order perturbation technique (SOPT) has been used for the predicting the fracture behavior of the structures. The stochastic/perturbation technique is also known as Taylor series expansion method and it provides the reliable results if the input randomness is less than twenty percentage. From the present numerical analysis it is observed that, the crack tip near to the hole is under the influence of the stress concentration and the variational effect of the input random parameters on the crack tip in terms of the SIFs are lesser so the COVs are the less sensitive. The COVs of mixed mode SIFs are the most sensitive for the crack angles (α=45° to 90°) for all the values of c₁ and d₁. The plate with the shorter distance between hole and crack is the most sensitive with all the crack angles but the crack tip which is much nearer to the hole has the highest sensitivity.

• Restorative Dentistry and Endodontics
• /
• v.49 no.2
• /
• pp.15.1-15.11
• /
• 2024

Objectives: This study aimed to establish a single-session associative protocol for nonrestorative management of dentin hypersensitivity (DH). Materials and Methods: Twenty-four individuals with DH and a minimum sensitivity level of 4 on the visual analog scale (VAS) were selected. The study was conducted in a split-mouth design, with each participant (n = 20) having at least 1 affected tooth in all quadrants. The management protocols consisted of control group: universal adhesive, Neural Desensitizing Protocol group: 5% potassium nitrate, Mixed Desensitizing Protocol (PAM) group: 5% sodium fluoride and 5% potassium nitrate, Remineralizing Desensitizing Protocol (PDR) group: surface-partially reacted glass technology photopolymerizable varnish. Evaluations were performed immediately after application, at 1 week, 1 month, 2 months, and 12 months using the VAS sensitivity test. Results: The scores were subjected to statistical analysis using the Friedman test (p < 0.05), Durbin-Conover test (p < 0.05), and Wilcoxon test (p < 0.05). At the 12-month evaluation, all groups showed statistically significant differences compared to the initial assessment. For the evaluation after 12 months, there was a statistically significant difference between the PAM group, the control group, and the PDR group. Conclusions: It can be concluded that all groups were effective in controlling DH, but there were significant results in the control group and PDR group. The clinical relevance of this study is to demonstrate that the application of single-session desensitizing protocols can be effective in controlling DH for up to 12 months.

• Asia Marketing Journal
• /
• v.14 no.1
• /
• pp.53-81
• /
• 2012

Constructing attractive bundle offers depends on more than an understanding of the distribution of consumer preferences. Consumers are also sensitive to the framing of price information in a bundle offer. In classical economic theory, consumers' utility should not change as long as the total price paid stays same. However, even when total prices are identical, consumers' preferences toward a bundle product could be different depending on the format of price presentation and the locus of price discount. A weighted additive model predicts that the impact of a price discount on the overall evaluation of the bundle will be greater when the discount is assigned to the more important product in the bundle(Yadav 1995). Meanwhile, a reference dependent model asserts that it is better to assign a price discount to a tie-in component that has a negative valuation at its current offer price than to a focal product that has a positive valuation at its current offer price(Janiszewski and Cunha 2004). This paper has expanded previous research regarding price discount presentation format, investigating the reasons for mixed results of prior research and presenting new mechanisms for price discount framing effect. Prior research has hypothesized that bundling is used to sell a tie-in component with an offer price above the consumer's reference price plus a focal product of the same offer price with reference price(e.g., Janiszewski and Cunha 2004). However, this study suggests that bundling strategy can be used for increasing product's attractiveness through the synergy between components even when offer prices of bundle components are the same with reference prices. In this context, this study employed various realistic bundle sets with same price between offer price and reference price in the experiment. Hamilton and Srivastava(2008) demonstrated that when evaluating different partitions of the same total price, consumers prefer partitions in which the price of the high-benefit component is higher. This study determined that their mechanism can be applied to price discount presentation formats. This study hypothesized that price discount framing effect depends not on the negative perception of tie-in component with offer price above reference price but rather on the consumers' perceived consumption benefit in bundle product. This research also hypothesized that preference for low-benefit discount mechanism is that perceived consumption benefit reduces price sensitivity. Furthermore, this study investigated how consumers' concern for quality in a price discount--a factor not considered in previous research--influences price discount framing. Yadav(1995)'s experiment used only one magazine bundle of relatively low quality uncertainty and could not show the influence of perceived uncertainty of quality. This study assumed that as perceived uncertainty of quality increases, the price sensitivity mechanism for assigning the discount to low-benefit will increase. Further, this research investigated the moderating effect of uncertainty of quality in price discount framing. The results of the experiment showed that when evaluating different partitions of the same total price and the same amount of discounts, the partition that discounts in the price of low benefit component is preferred to the partition that decreases the price of high benefit component. This implies that price discount framing effect depends on the perceived consumption benefit. The results also demonstrated that consumers are more price sensitive to low benefit component and less price sensitive to high benefit component. Furthermore, the results showed that the influence of price discount presentation format on the evaluation of bundle product varies with the perceived uncertainty of quality in high consumption benefit. As perceived uncertainty of quality gradually increases, the preference for discounts in the price of low consumption benefit decreases. Besides, the results demonstrate that as perceived uncertainty of quality gradually increases, the effect of price sensitivity in consumption benefit also increases. This paper integrated prior research by using a new mechanism of perceived consumption benefit and moderating effect of perceived quality uncertainty, thus providing a clearer explanation for price discount framing effect.

• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.197-203
• /
• 1998

The recognition thresholds of sucrose, NaCl, citrate, caffeine, and MSG solution were determined and the effects of MSG on four basic tastes were also investigated by the sensory evaluation. The recognition threshold of sucrose was 0.451%, NaCl 0.01%, caffeine 0.005%, citrate 0.004%, and MSG 0.033%. When MSG was added to 10% sucrose solution, the intensity of sweetness significantly decreased by 0.8% MSG. The sweetness of sucrose indicated the decreasing tendency according to the addition of MSG. When MSG was mixed with NaCl solution, the intensity of saltiness significantly increased. With an addition of MSG to the citrate solution, sourness was suppressed. The bitterness increased slightly in a caffeine solution when mixed with MSG.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.619-629
• /
• 2017

This paper focuses on the study of complete dynamic modeling and maximum dynamic load carrying capacity computation of N-flexible links and N-flexible joints mobile manipulator undergoing large deformation. Nonlinear dynamic analysis relies on the Timoshenko theory of beams. In order to model the system completely and precisely, structural and joint flexibility, nonlinear strain-displacement relationship, payload, and non-holonomic constraints will be considered to. A finite element solution method based on mixed method is applied to model the shear deformation. This procedure is considerably more involved than displacement based element and shear deformation can be readily included without inducing the shear locking in the element. Another goal of this paper is to present a computational procedure for determination of the maximum dynamic load of geometrically nonlinear manipulators with structural and joint flexibility. An effective measure named as Moment-Height Stability (MHS) measure is applied to consider the dynamic stability of a wheeled mobile manipulator. Simulations are performed for mobile base manipulator with two flexible links and joints. The results represent that dynamic stability constraint is sensitive when calculating the maximum carrying load. Furthermore, by changing the trajectory of end effector, allowable load also changes. The effect of torsional spring parameter on the joint deformation is investigated in a parametric sensitivity study. The findings show that, by the increase of torsional stiffness, the behavior of system approaches to a system with rigid joints and allowable load of robot is also enhanced. A comparison is also made between the results obtained from small and large deformation models. Fluctuation range in obtained figures for angular displacement of links and end effector path is bigger for large deformation model. Experimental results are also provided to validate the theoretical model and these have good agreement with the simulated results.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.80-89
• /
• 2013

The purpose of this research is to optimize the line planning of the intercity passenger railway. In this study, the line planning problem has been formulated into a mixed integer programming by minimizing both user costs (passenger's total travel time) and operator costs (operation, maintenance and vehicle costs) with multiple train types. As a solution algorithm, the branch-and-bound method is used to solve this problem. The change of travel demand, train speed and the number of schedules have been tested through sensitivity analysis. The optimal stop-schedules and frequency as well as system split with respect to each train type have been found in the case study of Kyoung-bu railway line in Korea. The model and results of this research are useful to make a decision for railway operation strategy, to analyze the efficiency of new railway systems and to evaluate the social costs of users and operators.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.6
• /
• pp.114-121
• /
• 2010

Oxygen sensitivity and substrate requirement have been known as possible reasons for the intricate growth of Dehalococcoides spp. and limiting factors of for routinely applying bioaugmentation using anaerobic Dehalococcoides-containing microbes for remediating chlorinated organic compounds. To explore the effect of the short-term exposure of the short-term exposure of oxygen on Dehalococcoides capability, dechlorination performance, and hydrogen production fermentation from formate, an anaerobic reductive dechlorination mixed-culture (Evanite culture) including dehalococcoides spp. was in this study. In the results, once the mixed-culture were exposed to oxygen, trichloroethylene (TCE) degradation rate decreased and it was not fully recovered even addition of excess formate for 40 days. In contrast, hydrogen was continuously produced by hydrogen-fermentation process even under oxygen presence. The results indicate that although the oxygen-exposed cells cannot completely dechlorinate TCE to ethylene (ETH), hydrogen fermentation process was not affected by oxygen presence. These results suggest that dechlorinating microbes may more sensitive to oxygen than fermenting microbes, and monitoring dechlorinators activity may be critical to achieve an successful remediation of a TCE contaminated-aquifer through bioaugmentation using Dehalococcoides spp..

• Korean Journal of Head & Neck Oncology
• /
• v.10 no.2
• /
• pp.91-101
• /
• 1994

Nodular thyroid disease is a common clinical problem. The problem in clinical practice is to distinguish malignant or potentially malignant tumor from harmless nodules. The cases of thyroid nodule surgically managed at Department of General Surgery, Soon Chun Hyang Univ. Hospital during the period Jan. 1985 to July. 1992 were reviewed retrospectively. To assess method of distinguishing malignant from benign lesions of the thyroid gland, we reviewed 162 patients with thyroid nodule. There were 61(37.7%) malignant nodules and 101(62.3%) benign nodules. According to the review, distinguishing the benign from the malignant nodule with history, physical examination, clinical manifestation, and duration of illness was not suggested sufficiently. In ultrasonogram of 73 cases, 57.5% of nodules were solid, 20.6% were cystic, 21.9% were mixed solid and cystic. Of these, 28.5% of the operated solid lesions, 12.5% of the mixed lesions, and only 6.7% of the cystic lesions were malignant. Thyroid scanning of 82 cases revealed cold nodules in 60 patients(73.2%), of which 26 cases were malignant(36.6%) 137 patients underwent fine needle aspiration cytology(FNAC), and these results were as follow: sensitiviey was 70.6%, specificity was 93.0%, false-positive rate was 14.3%, and false-negative rate was 15.8%. 41 patients underwent frozen biopsy, and the results as follow: sensitivity was 80.0%, specificity was 89.7%. Neither scintigraphy nor ultrasonogram has sufficient specificity to distinguish benign from malignant nodule. But FNAC and frozen biopsy have sufficient accuracy to differentiate benign from malignant nodule. In the benign nodules, the most common type of operation was total lobectomy (60.4%). Of the malignant nodules, total thyroidectomy with or without modified radical neck dissection was performed in 30 cases(49.2%). We conclude that the single technique used to determine the differential diagnosis of a thyroid nodule are unrealiable. It is therefore essential to combine all avaiable clinical and laboratory information.