• Resources Recycling
• /
• v.33 no.3
• /
• pp.12-20
• /
• 2024

The global cement industry emits approximately 2.9 billion tons of greenhouse gases, of which 1.74-1.89 billion tons are emitted from limestone, which is the main raw material for clinkers. Therefore, the feasibility of using slag, a non-carbonated CaO-based raw material, must be investigated, and the physical properties of cement must be considered. In this study, the mixing ratios of the raw mix and properties of cement were analyzed. The CaCO₃ replacement ratio was limited when one type of slag was used; however, when the mixed slag was utilized, the CaCO₃ replacement ratio increased by more than 12 %. The compressive strength of the slag-incorporated cement was lower than that of Ordinary Portland Cement (OPC). Therefore, the lime saturation factor (LSF) of the raw mix and fineness of the cement were increased to improve the compressive strength. The compressive strength of cement with improved fineness was similar to that of OPC for a CaCO₃ replacement ratio of up to 6 %, and it decreased as the CaCO₃ replacement ratio was increased to 9 %. When both fineness and LSF were increased, the compressive strength and flow value of the cement with a CaCO₃ replacement ratio of 12 % were similar to that of OPC.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2008

The purpose of this study is to characterize the hydrogeochemical characteristics of hot spring waters and to interpret the source of noble gases and the geochemical environment of the hot spring waters distributed along the eastern area of the Korean peninsula. For this purpose, We carried out the chemical, stable isotopic and noble gas isotopic analyses for eleven hot spring water and fourteen hot spring gas samples collected from six hot spring sites. The hot spring waters except the Osaek hot spring water show the pH range of 7.0 to 9.1. However, the Osaek $CO_2$-rich hot spring water shows a weak acid of pH 5.7. The temperature of hot spring waters in the study area ranges from $25.7^{\circ}C$ to $68.3^{\circ}C$. Electrical conductivity of hot spring waters varies widely from 202 to $7,130{\mu}S/cm$. High electrical conductivity (av., $3,890{\mu}S/sm$) by high Na and Cl contents of the Haeundae and the Dongrae hot spring waters indicates that the hot spring waters were mixed with seawater in the subsurface thermal system. The type of hot springs in the viewpoint of dissolved components can be grouped into three types: (1) alkaline Na-$HCO_3$ type including sulfur gas of the Osaek, Baekam, Dukgu and Chuksan hot springs, and (2) saline Na-Cl type of the Haeundae and Dongrae hot springs, and (3) weak acid $CO_2$-rich Na-$HCO_3$ type of Osaek hot spring. Tritium ratios of the Haeundae and the Dongrae hot springs indicate different residence time in their aquifers of older water of $0.0{\sim}0.3$ TU and younger water of $5.9{\sim}8.8$ TU. The ${\delta}^{18}O$ and ${\delta}D$ values of hot spring waters indicate that they originate from the meteoric water, and that the values also reflect a latitude effect according to their locations. $^3He/^4He$ ratios of the hot spring waters except Osaek $CO_2$-rich hot spring water range from $0.1{\times}10^{-6}$ to $1.1{\times}10^{-6}$ which are plotted above the mixing line between air and crustal components. It means that the He gas in hot spring waters was originated mainly from atmosphere and crust sources, and partly from mantle sources. The Osaek $CO_2$-rich hot spring water shows $3.3{\times}10^{-6}$ in $^3He/^4He$ ratio that is 2.4 times higher than those of atmosphere. It provides clearly a helium source from the deep mantle. $^{40}Ar/^{36}Ar$ ratios of hot spring water are in the range of an atmosphere source.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.246-254
• /
• 2015

From 2013 to 2014, volatile organic compounds (VOCs) were analyzed to determine biogenic volatile organic compounds (BVOCs) and anthropogenic volatile organic compounds (AVOCs) at eight sites in Mt. Mudeung and one site in downtown, by using a GC/Mass-ATD (automatic thermal desorber). The concentration of terpene noted as biogenic volatile organic compounds at Pungamjeong (PA), in a forest of Chamaecyparis obtusa, was 821 pptv, which was the highest among the eight sites. This value was followed by Wonhyogyegok (WH: 785 pptv), Norritzae (NZ, coniferous forest: 679 pptv), Dongjeokgol (DJ, mixed species forest: 513 pptv), Jangbuljae (JB, Abies koreana: 476 pptv), and Seinbongsamgerri (SS, pine trees: 464 pptv). 11~15 species of terpene was detected in the forest depending on the site. At PA in May, α-pinene showed the highest value, occupied 20% of terpene followed by coumarin, sabinene, phellandrene, myrcene, borneol, eucalyptol, β-pinene, cymene, δ-limonene, γ-terpinene, camphor, camphene, and mentol in the order. The mean concentrations of AVOCs were 0.74~2.52 ppbv in the forests and 3.14 ppbv in the downtown area. From May to July, the AVOCs ratios of the downtown to each forest were 1.9~4.0. Among 10 species of AVOCs, the sum of toluene and benzene was 2.34 ppbv and occupied 75%. In June, the ratios of toluene were 44.1% at DJ site and 53.1% at JW site (downtown). The BVOCs showed a positive correlation with the AVOCs at the forest sites (r = 0.328), which was statistically insignificant (p = 0.184).

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.2
• /
• pp.131-136
• /
• 1998

This experiment was carried out to investigate the effect of several organic fertilizers on the growth and root yield of Achyranthes japonica N. from 1995 to 1996. Four organic fertilizers were applied: rice straw manure (RSM), fermented rice straw manure (FRSM), mixed oil cake manure (MOCM) and mighty soil manure (MSM). Organic matter, available phosphate, $K_2O$, CaO, and MgO of soil increased in all plots with the addition of organic fertilizers, specifically with MOCM application. The highest contents of total nitrogen were 6.16% for MOCM and the available phosphate contents were very high in all of organic fertilizers except MSM. RSM and MSM with C/N ratios of 22.5, 17.7, respectively, were easily decomposed but C/N ratios of FRSM and MOCM, which were considered as irresolvable organic fertilizers, were 40.9 and 8.4, respectively. FRSM and MOCM applications increased emergence rate and improved the growth characters of shoot and root parts of plants compared to those of N - P - K fertilization. The highest dry root yield resulted from FRSM 20% and MOCM 26% treatment. There were significantly positive correlations between the growth characters of shoot, root parts of plants and dry root yield in A. japonica grown under organic fertilizer applications.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1626-1633
• /
• 2004

In recent, the roles of oleic acid, most abundant fatty acid in myelin, were investigated in relation to the brain functions. This study examined the effects of diets either with desirable ratios of $\omega$6/ $\omega$9 and P/M/S (mixed oil-fed group: MO) or with defficient in $\omega$3 series fatty acids (safflower oil-fed group: SO) on the oleic acid composition in RBC and brain synaptosomal, mitochondrial & microsomal phospholipids. The desirable fatty acid composition was computer-searched with different fats and oils to meet right ratios of both $\omega$6/ $\omega$3 and P/M/S. Diets were fed 3 weeks before conception and new-born pups were fed maternal milk from the same mothers and same diets until 9 wks of age. At 3 wks of age, the compositions of oleic acid in brain subcellular fractions and red blood cells were constantly remained whatever the composition of dietary fatty acids. But at 9 wks of age, the composition of oleic acid in synaptosome and mitochondria were significantly higher in MO group than SO group. The composition of oleic acid in milk was significantly higher in MO group than SO group, but in case of SO group, that of oleic acid was increased by 48%, in comparison with dietary fatty acid compositions. -9 desaturase index (18:0\longrightarrow8:1) of brain synaptosome was significantly higher in MO group than SO group at 3 and 9 weeks of ages, but that of brain microsome was higher in SO group than MO group at 9 wks of age. Taken together, the presences of oleic acid in the diet was important to maintain brain functions. The origins of oleic acid in brain may suggests two hypotheses; first, the central nervous system has priority for the uptake of oleic acid, and second the nervous system can synthesize all the oleic acid it needs, independently of its presence in the diet.

• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.463-471
• /
• 2016

A shear strength model for the high-shear ring anchor consisting of a steel ring and a rod was developed based on the shear tests on single high-shear ring anchors. The shear strength was found to be proportional to $f_{ck}{^{0.75}}$ which is a similar characteristic to the strength of shear connectors used in composite structures. The effects of the compressive strength of concrete, edge distance, and embedment length of rod are included in the proposed model. Comparison with 22 tests shows that the average and the coefficient of variation of test-to-prediction ratios are 1.01 and 7.57%, respectively. Push tests on the specimens having four high-shear ring anchors at each face were conducted and the measured shear strengths were compared with the predictions by the proposed model. For the specimen with an edge distance of 100 mm, a splitting failure occurred and for the specimens with an edge distance of 150 mm, a failure mode mixed with splitting and bearing occurred, which were very similar to the failures of shear tests on single high-shear ring anchors. In case of a splitting failure, the overlap of failure surfaces could be prevented by providing the longitudinal spacing of 400 mm which is four times of the edge distance. In case of a bearing failure, the failure area is less than 150 mm from the center of the anchor and therefore the overlap of failure surfaces could be prevented by providing the longitudinal spacing of 200 mm. The average of the test-to-prediction ratios of Push tests is 98%, which means that the proposed mode can be applied to predict the shear strength of the multiple high-shear rings.

• Journal of Chest Surgery
• /
• v.33 no.3
• /
• pp.221-229
• /
• 2000

Background: Thromboxane A2 and endothelin-1 are the potent vasoconstrictors affecting pulmonary pathophysiology in response to whole body inflammatin following CPB. Aprotinin, as an antiiflammatory agent, may decrease the release of such vasoactive substance from pulmonary tissues, preventing pulmonary hypertension after cardiopulmonary bypass. Material and Method: Ten mongrel dogs(Bwt. ac. 20kg) were subjected to cardioupulmonary bypass for 2 hours and postbypass pulmonary vascular resistance(0, 1, 2, 3 hours) were compared with prebypass level. The dogs were divided into 2 groups; control group(n-5) and aprotinin group(n=5). In the aprotinin group, aprotinin was administered as follows; 50,000 KIU/kg mixed in pump priming solution, 50,000 KIU/kg prebypass intravenous infusion over 30 minutes, 10,000 KIU/kg/hour postbypass continuous infusion. Prebypass and postbypass 0, 1, 2, 3 hour pulmonary vascular resistance were measured. At prebypass and postbypass 0, 90, 180 minutes, blood samples were obtained from pulmonary arterial and left atrial catherers for the assay of plasma thromboxane B2 a stable metabolite of thromboxane A2, and endothelin-1 concentrations. Result: The ratios of pustbypass over prebypass pulmonary vascular at postbypass 0, 1, 2, 3 hours were 1.28$\pm$0.20, 1.82$\pm$0.23, 1.90$\pm$0.19, 2.14$\pm$0.18 in control group, 1.58$\pm$0.18, 1.73$\pm$0.01, 1.66$\pm$0.10, 1.50$\pm$0.08 in aprotinin group ; the ratios gradually increased in control group while decreased or fluctuated after postbypass 1 hour in aprotinin group. There was statistically significant difference between control group and aprotinin group at postbypass 3 hours(P=0.014). Pulmonary arterial plasma concentration of thromboxane B2(pg/ml) at prebypass, postbypass 0, 90, 180 minutes were 346.4$\pm$61.9, 529.3$\pm$197.6, 578.3$\pm$255.8, 493.3$\pm$171.3 in control group, 323.8$\pm$118.0, 422.6$\pm$75.6, 412.3$\pm$59.9, 394.5$\pm$154.0 in aprotinin group. Left atrial concentrations were 339.3$\pm$89.2, 667.0$\pm$65.7, 731.2$\pm$192.7, 607.5$\pm$165.9 in control group, 330.0$\pm$111.2, 468.4$\pm$190.3, 425.4$\pm$193.6, 4.7.3$\pm$142.8 in aprotinin group. These results showed decrement of pulmonary thromboxane A2 generation in aprotinin group. Pulmonary arterial concentrations of endothelin-1(fmol/ml) at the same time sequence were 7.84$\pm$0.31, 13.2$\pm$0.51, 15.0$\pm$1.22, 16.3$\pm$1.73 in control group, 7.76$\pm$0.12, 15.3$\pm$0.71, 22.6$\pm$6.62, 14.9$\pm$1.11 in aprotinin group. Left atrial concentrations were 7.61$\pm$17.2, 57.1$\pm$28.4, 18.9$\pm$18.2, 31.5$\pm$20.5 in control group, 5.61$\pm$7.61, 37.0$\pm$26.2, 28.6$\pm$21.7, 37.8$\pm$30.6 in aprotinin group. These results showed that aprotinin had no effect on plasma endothelin-1 concentration after cardiopulmonary bypass. Conclusion: Administration of aprotinin during cardiopulmonary bypass could attenuate the increase in pulmonary vascular resistance after bypass. Inhibition of pulmonary thromboxane A2 generation was thought to be one of the mechanism of this effect. Aprotinin had no effect on postbypass endothelin-1 concentration.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.219-226
• /
• 2013

Activated magnetite ($Fe_3O_{4-{\delta}}$) has the capability of decomposing $CO_2$ proportional to the ${\delta}$-value at comparatively low temperature of $300^{\circ}C$. To enhance the $CO_2$ decomposition capability of $Fe_3O_{4-{\delta}}$, $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$ were synthesized and then reacted with $CO_2$. $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ powders having Fe to Co mixing ratios of 9:1, 8:2, 7:3, 6:4, and 5:5 were synthesized by co-precipitation of $FeSO_4{\cdot}7H_2O$ and $CoSO_4{\cdot}7H_2O$ solutions with a $(NH_4)_2C_2O_4{\cdot}H_2O$ solution. The same method was used to synthesize $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ powders having Fe to Mn mixing ratios of 9:1, 8:2, 7:3, 6:4, 5:5 with a $MnSO_4{\cdot}4H_2O$ solution. The thermal decomposition of synthesized $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ and $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ was analyzed in an Ar atmosphere with TG/DTA. The synthesized powders were heat-treated for 3 hours in an Ar atmosphere at $450^{\circ}C$ to produce activated powders of $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$. The activated powders were reacted with a mixed gas (Ar : 85 %, $CO_2$ : 15 %) at $300^{\circ}C$ for 12 hours. The exhaust gas was analyzed for $CO_2$ with a $CO_2$ gas analyzer. The decomposition of $CO_2$ was estimated by measuring $CO_2$ content in the exhaust gas after the reaction with $CO_2$. For $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$, the amount of $Mn^{2+}$ oxidized to $Mn^{3+}$ increased as x increased. The ${\delta}$ value and $CO_2$ decomposition efficiency decreased as x increased. When the ${\delta}$ value was below 0.641, $CO_2$ was not decomposed. For $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$, the ${\delta}$ value and $CO_2$ decomposition efficiency increased as x increased. At a ${\delta}$ value of 0.857, an active state was maintained even after 12 hours of reaction and the amount of decomposed $CO_2$ was $52.844cm^3$ per 1 g of $(Fe_{0.5}Co_{0.5})_3O_{4-{\delta}}$.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.135-142
• /
• 2010

The composting of layer manure is economical and efficiently process. In this study, the variation of composting characteristics in layer manure was investigated according to air supply capacity. The fermented compost was added in layer manure and mixed with sawdust inside composting reactors. The level of air supply capacity was varied in the range of $50{\sim}200\;{\ell}/m^3/min$. During composting the temperature variations of composting piles was different the temperatures of composting piles for T-1 ($50\;{\ell}/m^3/min$) and T-2 ($100\;{\ell}/m^3/min$) were reached at $40^{\circ}C$ and $50^{\circ}C$ within 2 days, respectively. For T-3 ($150\;{\ell}/m^3/min$) and T-4 ($200\;{\ell}/m^3/min$), their temperatures was $60^{\circ}C$ within same days and maintained during 8 days. Water contents decreased according to the air supply capacity; 8.9%, 15.4%, 18.0% and 18.6% for T-1, T-2, T-3 and T-4. The weight ratios of T-1, T-2, T-3 and T-4 were reduced to 12.8%, 15.6%, 18.1% and 17.9%, respectively. The decreasing volumetric ratios of T-1, T-2, T-3 and T-4 were 18.0%, 21.0%, 22.3% and 22.0%. The oxygen discharge concentrations during composting were 12 ppm for T-1, T-2 and 9 ppm for T-3 and T-4. After composting, fertilizer components such as total nitrogen (TN) and phosphorous pentoxide ($P_2O_5$) were examined at each air supply capacity. Nitrogen contents of the T-1, T-2, T-3 and T-4 were 0.75%, 0.74%, 0.72% and 0.64%. Also, The contents of $P_2O_5$ were 0.35%, 0.40%, 0.38% and 0.42% for T-1, T-2, T-3 and T-4.

• Journal of Radiation Protection and Research
• /
• v.23 no.3
• /
• pp.123-138
• /
• 1998

Characteristics of element responses of Panasonic UD802 personnel dosimeters in the X, ${\beta}$, ${\gamma}$, ${\gamma}/X$, ${\gamma}/{\beta}$ and ${\gamma}$/neutron mixed fields were assessed. A dose-response algorithm has been developed to decide the high probability of a radiation type and energy by using the distribution in all six ratios of the multi-element TLD. To calculate the 4-element response factors and ratios between the elements of the Panasonic TLDs in the X, $\beta$, and $\gamma$ radiation fields, Panasonic’s UD802 TLDs were irradiated with KINS’s reference irradiation facility. In the photon radiation field, this study confirms that element-3 (E3) and element-4 (E4) of the Panasonic TLDs show energy dependent both in low- and intermediate-energy range, while element-1 (E1) and element-2 (E2) show little energy dependency in the entire whole range. The algorithm, which was developed in this study, was applied to the Panasonic personnel dosimetry system with UD716AGL reader and UD802 TLDs. Performance tests of the algorithm developed was conducted according to the standards and criteria recommended in the ANSI N13.11. The sum of biases and standard deviations was less than 0.232. The values of biases and standard deviations are distributed within a triangle of a lateral value of 0.3 in the ordinate and abscissa, With the above algorithm, Panasonic TLDs satisfactorily perform optimum dose assessment even under an abnormal response of the TLD elements to the energy imparted. This algorithm can be applied to a more rigorous dose assessment by distinguishing an unexpected dose from the planned dose for the most practical purposes, and is useful in conducting an effective personnel dose control program.