• 한국물환경학회지
• /
• 제28권1호
• /
• pp.115-120
• /
• 2012

Different colloidal particles generally co-exist in the water and wastewater. Thus, there needs to identify practical electrokinetic characteristics of the particles, comparing with the case when each colloidal material is independently distributed. In this study, changes of overall zeta potential was examined through mixed dispersions of $TiO_{2}$ and $MnO_{2}$. The mixing ratios were classified into 3-type in order to distinguish the effects of the proportions of each particle from those of total concentration in colloidal suspensions. The types are single colloidal dispersions of $TiO_{2}$ and $MnO_{2}$ (1:0, 0:1), mixed dispersions at different ratios (0.75:0.25, 0.5:0.5, 0.25:0.75), and a mixed dispersion with doubled concentration (1:1), respectively. It showed that the overall variation of zeta potential as a function of pH was intensified in a colloidal dispersion with the ratio of 1:1. It was concerned that the double action of ion would contribute to this result. On the one hand, the zeta potentials of each colloidal dispersion commonly decreased at the state of strong acid and base under the influence of compression of the electric double layer. The changing patterns were also considered through calculating total interaction energy between colloidal particles based on DLVO theory and measuring turbidity of the colloidal dispersions.

• Plant Resources
• /
• 제3권2호
• /
• pp.110-117
• /
• 2000

The recycling method of enokitake cultural waste and the potentiality of second flush for enokitake were determined, because this fungus is not as prolific as the more commonly cultivated white rot fungi in the conversion of sawdust to mycelial mass. The mycelial growth of F. velutipes on several substrates, variously treated with rice bran was promoted at ratios of 10-20% (w/w) on all substrates, but suppressed at above ratios, although some difference was there. The mycelial densities generally increased correlated to the supplementation contents of rice bran. It could be concluded that F. velutipes preferred mild acidic to acidic conditions for mycelial growth, considering that the mycelial growth rate was highest on waste of pH 6.01, treated with 0.1 % Ca(OH)$_2$ and on populus mixed waste of pH 6.02, non treated. The ranges of substrate bulk densities, which was pertinent for mycelial linear growth were from B.D. (g/cc) 0.17 to 0.23 on waste and populus mixed waste all. The pertinent contents of rice bran supplementation in bottle cultivation was from 20 to 30% on waste and 20% on populus mixed waste, considering the requried duration for pinheading and fruiting yields. Standard bulk density for filling and utilizing the waste and populus mixed waste for commercial f. velutipes cultivation were B.D.(g/cc) 0.19 ~ 0.23, and 0.23~ 0.25, which could be conversed to 510~ 540g/900m1 and 520~ 570g/900m1, respectively, The second flush of F. velutipes was tried and the re-inoculation by sawdust and liquid spawn showed somewhat good results, indicating the potentiality of second crop and suggesting further research for it.

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.58-65
• /
• 2007

MMF 시험을 적용하여 혼합모우드 비율을 20%～90%의 범위 내에서 변화시키면서 탄소섬유직물/에폭시 복합재의 혼합모우드 층간파괴 거동을 조사하였다. 혼합모우드 층간파괴 거동을 예측하기 위해 NL점과 5% offset점에 근거한 혼합모우드 층간파괴 결정식을 제시하였다. 파단면 양상과 균열진전 거동은 이동식 현미경과 전자현미경을 통해 조사하였다. 연구결과에 따르면 혼합모우드 층간파괴 거동은 NL점에 근거한 경우 매개변수 m=1.5와 n=0.5, 5% offset점에 근거한 경우 매개변수 m=2와 n=3인 혼합모우드 층간파괴 결정식에 의해 잘 예측되어진다. 파단면 양상과 균열진전 거동은 혼합모우드 비율에 매우 민감하게 변하며 MMF 시험은 혼합모우드 층간파괴인성의 평가에 성공적으로 적용됨을 알 수 있었다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.207-211
• /
• 2009

In this study, we attempted to develop a convenient aluminizing process, using Al-Ti mixed slurry as an aluminum source, to control the Al content of the aluminized layer as a result of a one-step process and can be widely adopted for coating complex-shaped components. The aluminizing process was carried out by the heat treatment on disc and rod shaped S45C steel substrates with Al-Ti mixed slurries that were composed of various mixed ratios (wt%) of Al and Ti powders. The surface of the resultant aluminized layer was relatively smooth with no obvious cracks. The aluminized layers mainly contain an Fe-Al compound as the bulk phase. However, the Al concentration and the thickness of the aluminized layer gradually decrease as the Ti proportion among Al-Ti mixed slurries increases. It has also been shown that the Al-Ti compound layer, which formed on the substrate during heat treatment, easily separates from the substrate. In addition, the incorporation of Ti into the substrate surface during heat treatment was not observed.

• 보존과학회지
• /
• 제31권1호
• /
• pp.1-11
• /
• 2015

보물 제1312호 무위사 아미타여래삼존좌상은 기존에 목조불로 알려졌으나 2009년에 실시한 정밀안전진단을 통해 본존불인 아미타여래좌상은 흙으로 조성된 소조불로 밝혀졌다. 그런데 아미타여래좌상의 소조층은 손상이 심각하여 보수가 불가피하였고, 이에 보수재료로서 보다 안전하고 적합한 충전제에 대한 연구를 진행하였다. 본 연구는 무위사 아미타여래좌상의 소조층 보수에 가장 적합한 충전제를 제작하기 위한 실험으로 다양한 비율로 배합한 조합토 샘플을 제작한 후 건조 시 표면의 경화상태, 균열 및 색상변화, 수축률 결과를 측정하였다. 충전제 제작에 사용된 조합토 재료는 황토와 세사, 면 솜을 적용하였으며 6가지의 배합비율로 조합토 시료를 만들고 여기에 찹쌀풀, 도박풀, 아교로 만든 12가지 농도의 접착제를 혼합하여 총72가지 조건의 시료를 제작하여 비교분석 하였다. 실험결과 조합토는 황토와 세사의 질량비에 대하여 2.5%의 면 솜을 함유하고, 황토와 세사의 비율이 15:1일 때 수축률이 가장 낮은 것으로 판명되었으며, 천연접착제 중 색상의 변화가 적고, 물성변화량과 수축률이 가장 낮은 아교가 사용 가능한 접착제로 판단되었다. 즉, 조합토(황토:세사=15:1)와 아교15ml 첨가 시 가장 낮은 수축률을 나타내어 무위사 아미타여래좌상 보존처리 시소조층의 충전제로 가장 적합한 것으로 판명되었다.

• 한국의류학회지
• /
• 제35권10호
• /
• pp.1242-1251
• /
• 2011

This study investigates the effect of mixed characteristics of oily soil such as mixed ratio, polarity of oily soil on contact angle of fabric, removal of oily and particulate soil from PET fabric in oily/particulate soil mixed system. The contact angle of fabric in the surfactant solution with suspended oily soil was examined as a fundamental environment of detergency of soil from fabrics. Detergency was investigated as function of mixed ratios of oily/ particulate soil, type of oily soil, surfactants concentration, surfactant type and temperature of detergency in surfactant solution. The contact angle of fabric in surfactant solution sharply increased with mixing nonpolar oily soil; in addition, the contact angle slightly increased with increasing contents of oily soil and decreased with increasing surfactant concentration. The removal of oily and particulate soil from fabric was higher in the solution mixed with polar versus nonpolar oily soil. The detergency increased with increasing surfactant concentration and the increased temperature of surfactants solution that were relatively improved in NPE compared to DBS solutions, The results indicated that the detergency of oily and particulate soil showed a similar trend in oily/ particulate mixed soil systems. The general contact angle of fabric was well related with the detergency of oily and particulate soil in oily/particulate mixed soil system, therefore, the primary factor determining the detergency of soil in oily/particulate mixed soil system may be the contact angle of fabric caused by wettability.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.157-160
• /
• 2011

This study was conducted to find a method using the application of rice bran and mixed expeller cake at machine transplanting rice paddy field. Different ratios of rice bran and mixed expeller cake were sprayed as substitute of chemical fertilizer (nitrogen 90kg $ha^{-1}$) before transplanting. Nitrogen content was highest in 30th day after transplantation, and in relation to treatments the order was the following: Rice bran 1,000kg $ha^{-1}$ + Mixed expeller cake 1,374kg $ha^{-1}$ > rice bran 2,000kg $ha^{-1}$ + Mixed expeller cake 948kg $ha^{-1}$ > rice bran 3,000kg $ha^{-1}$ + Mixed expeller cake 522kg $ha^{-1}$. Number of panicle and spikelets per $m^{-2}$ was higher in rice bran 1,000kg $ha^{-1}$ + Mixed expeller cake 1,374kg $ha^{-1}$ and rice bran 2,000kg $ha^{-1}$ + Mixed expeller cake 948kg $ha^{-1}$ than in rice bran 3,000kg $ha^{-1}$ + Mixed expeller cake 522kg $ha^{-1}$ and the yields was the highest in rice bran 1,000kg $ha^{-1}$ + Mixed expeller cake 1,374kg $ha^{-1}$.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.3-8
• /
• 2012

Chemical compositions and lead isotope ratios for four glass bead samples of Seokga-tap were analyzed and the results were organized. Among 4 glass beads found in the Seokga-tap, 3 pieces were lead glass. Manufacturing method was to firstly grind pebbles finely and mix lead ore to be melt at $740{\sim}760^{\circ}C$. The mixed ratio of silica and lead was 3:7. Moreover, The evaluation on the lead isotope ratio indicated that two lead glass pieces used lead ore from northern Korea. One piece has the direction of southern Korea lead ore, but it requires a further review. One glass bead of Seokga-tap was brown and it was potash lead glass ($K_2O-PbO-SiO_2$) System. The mixed ratio was approximately 50:10:40 for silica, natural saltpeter, and lead, respectively. Lead isotope ratio data fell within the lead ore from northern China. Therefore, it was concluded that potash lead glass found in the Seokga-tap was produced in northern area of China at the end of $10^{th}$ century and transferred to the Seokga-tap.

• 한국농공학회논문집
• /
• 제60권3호
• /
• pp.123-133
• /
• 2018

The purpose of this paper is to propose an experimental method to evaluate the resistance of abrasion about 24 MPa, 27 MPa, and 30 MPa compressive strength. These strength are used in the design and construction of concrete hydraulic structures in Korea. The mixing ratios of the ready mixed concrete strengths were investigated countrywide and set the representative mixture proportion ratios of the nine mixed types of OPC, FA and BFS. After making and curing the test specimens, the underwater abrasion test was performed. ASTM C 1138 International Standard was used to fabricate the test equipment, and the surface abrasion resistance of the specimen was tested using the test equipment. In the case of OPC, the 30% abrasion resistance improvement effect was observed at 72 hours as the water-binder ratio decreased. That was reason the coated cement bond strength of the specimen was strong. In the case of BFS and FA, it was improved by 9.9% and 3.8%, respectively, at 72 hours as the water-binder ratio decreased. It was due to the characteristics of the latent hydraulic and pozzolanic reactions. Generally, the relative abrasion resistance of concrete can be evaluated at 24 hours. However, in case of low strength (under 24 MPa), the surface mortar layer wears much faster at the first 12 hours, so it can be considered to evaluate the relative abrasion loss rate at this point.

• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.39-46
• /
• 2000

This study is to investigate the watertightness properties of waterproofing admixture mixed redispersible polymer and siliceous powder. Series I deals with change in micro-structure of mortar by waterproofing admixture according to the water/cement ratios of 0.5, 0.6, 0.7 and 0.8 Crystal growth in micro-structure was observed through SEM to estimate on the watertightness effect of it. SeriesII deals with watertightness properties of waterproofing admixture on water permeability coefficient, crack restoration capacity and carbonation depth. SeriesII deals with watertightness properties of waterproofing admixture on water permeability coefficient, crack restoration capacity and carbonation depth. The result of this study can be summarized as follows. 1) Fluidity of mortar and concrete was increased by adding waterproofing admixture. 2) From observation through SEM. Crystals grew larger and denser in micro-structure as fiberic crystalization. 3) Waterproofing admixture is good watertightness properties in a level of high water/cement ratios and long limit of time. 4) Crack restoration capacity was appeared and durability was progressed by waterproofing admixture.