• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.241.1-241.1
• /
• 2011

Numerous possible applications for $ZrO_2$ nanotubes exist such as for catalyst support structures, for sensing or for applications as a solid state electrolyte. Especially, because of a large specific surface area, high efficiency for solid oxide fuel cell (SOFC) application at low temperature can be expected for nanotublar structures in even small size. A zirconium precursor, Tetrakis (ethylmethylamino) zirconium, TEMAZr and $H_2O$ oxidant were used to deposit$ZrO_2$ thin films on an anodized aluminum oxide (AAO) templates having sub-100nm cylindrical pores by atomic layer deposition (ALD) in the temperature range of 150~250$^{\circ}C$. The crystalline structures of as-prepared and post-annealed $ZrO_2$ nanotubes were characterized by x-ray diffraction and high-resolution transmission electron microscopy. The as-prepared samples at $150^{\circ}C$ and $200^{\circ}C$ were showed amorphous, whereas a mixed phase of tetragonal, monoclinic and amorphous polymorph was observed at $250^{\circ}C$. In the bulk, zirconia remains monoclinic phase up to $1,175^{\circ}C$, however, $ZrO_2$ nanotubes were showed tetragonal phase upon post thermal treatments merely at $400^{\circ}C$. This trend may be indicative of high-curvature surfaces of nanotubes and thereby the presence of intrinsic compressive strain. The amount of amorphous structures in the mixed phase as well as as-grown $ZrO_2$ nanotubes were also gradually decreased by subsequent heat treatment.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.383-386
• /
• 1998

The microwave dielectric properties and sintering properties of the xCaTi $O_{3}$-yMgTi $O_{3}$-z(L $i_{1}$2/N $d_{1}$2/)Ti $O_{3}$ systems were investigated for the development of microwave dielectric materials. Dielectric constants decreased with increasing the amounts of MgTi $O_{3}$ and increased with reducing the amounts of MgTi $O_{3}$ and increased with reducing (L $i_{1}$2/N $d_{1}$2/)Ti $O_{3}$ contents. The microscopic structures were mixed phase with a little second phase. We found some compositions with .tau.$_{f}$ changed from positive to negative value with increasing MgTi $O_{3}$ or (L $i_{1}$2/N $d_{1}$2/)Ti $O_{3}$ contents. The microscopic strucstures were mixed phase with a little second phase. We found some compositions with .tau.$_{f}$ =0ppm/.deg.C. these compmsitions exhibited the stable dielectric properties on the various sintering temperatures.res.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.278-284
• /
• 2017

In this work, Ta-substituted $Li_7La_3Zr_{2-x}O_{12}$ (LLZTO) powder and pellets with garnet cubic structure were fabricated and characterized by modified and optimized sol-gel synthesis. Ta-substituted LLZO powder with the smallest grain size and pure cubic structure with little pyrochlore phase was obtained by synthesis method in which Li and La sources in propanol solvent were mixed together with Zr and Ta sources in 2-methoxy ethanol. The LLZTO pellets made with the prepared powder showed cubic garnet structure for all conditions when the amount of Li addition was varied from 6.2 to 7.4 mol. All the X-ray peaks of the pyrochlore phase disappeared when the Li addition was increased above 7.0 mol. When the final sintering temperature was varied, the LLZTO pellet had a pyrochlore-mixed cubic phase above $1000^{\circ}C$. However, the surface morphology became much denser when the final sintering temperature was increased. The sol-gel-driven LLZTO pellet with a sintering temperature of $1100^{\circ}C$ showed a lithium ionic conductivity of 0.21 mS/cm when Au was adopted as electrode material for the blocking capacitor. The results of this study suggest that modified sol-gel synthesis is the optimum method to obtain cubic phase of LLZTO powder for highly dense and conductive solid electrolyte ceramics.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.39-43
• /
• 2001

Nanocrystalline Fe-Sm-O thin films were prepared by RF magnetron reactive sputtering method in $Ar+O_2$mixed atmosphere with the $O_2$content of 5%. The compositions of the thin films were changed by changing the number of $Sm_2O_3$ chips. The best soft magnetic properties of the thin film with the composition of $Fe_{83.4}Sm_{3.4}O_{13.2}$ were saturation flux density of 18 kG, coercivity of 0.82 Oe and effective permeability about 2,600 at 0.5~100 MHz, respectively. The electrical resistivity of Fe-Sm-O thin films was increased with increasing the amount of Sm and O elements which combined each other, the electrical resistivity of$Fe_{83.4}Sm_{3.4}O_{13.2}$ thin film was $130{\mu}{\Omega}cm$. In case of the small amount of Sm and O elements, the microstructures of Fe-Sm-O thin films showed a precipitated phase of $Sm_2O_3$ on the ${\alpha}-Fe$ phase. With the increase of the amount of Sm and O elements, the microstructures of the Fe- Sm-O thin films were changed into a mixed structure of ${\alpha}-Fe$ crystal-phase and Sm-oxide amorphous phase. The Fe-Sm-O thin films with Fe content in the range of 72~94 at% exhibited the quality factor (Q = $\mu$′/$\mu$") of 7~75 up to 50 MHz.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.111-120
• /
• 2009

The conceptual cost estimation used the construction project needs for confirm budget not only at the planning phase but also at the preliminary design phase of the construction project. Present, the conceptual cost estimation model have problems the rate of error is very large because the linear simple model calculate by use the cost of the unit meter or the unit square. This study development the model used grouping and the key quantity method, the mixed unit cost for solve problem of the very large rate of error. The result of this study reduced difference of between the real design construction cost therefor it expect that contribute to the client or the service company estimate budget of RC rahmen bridge.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.733-739
• /
• 2001

In Al-25Nb binary system, it was observed only formation of $D0_{22}$ $Al_3Nb$ intermetallic compound after 5hr milling but it was not observed formation of meta stable phase like L1$_2$ phase. In this state, $D0_{22}$ $Al_3Nb$ fabricated had nano sized grain of approximately 20nm. Ternary systems, transition metals such as Cr, Cu, Fe, Mn were added 6~12at.% as substitution of Al, showed formation of $D0_{22}$ $Al_3Nb$ like Al-25Nb binary system. In Al- l2Cu-25Nb system, it was observed that broad XRD pattern like amorphization of Al and not observed formation of $D0_{22}$ $Al_3Nb$ after 5hr milling. But there was mixed phase of a lot of amorphous Al and little $D0_{22}$ $Al_3Nb$ through TEM. In the states of unalloyed, 5~7hr milling time, those showed exothermic reaction at 35$0^{\circ}C$, which was formation of $D0_{22}$ $Al_3Nb$ like Al-25Nb binary system. With increasing milling time to 10hr, $D0_{22}$ $Al_3Nb$ was transformed to mixed phase of amorphous and nanocryatlline, having approximately 10nm grain but the meta stable $Al_3Nb$ was not fabricated by adding transition metals.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.341-345
• /
• 2012

[Li0.055(K0.5Na0.5)0.945](Nb1-xTax)O3 (0.05 ≤ x ≤ 0.25) ceramics were prepared by the partial sol-gel (PSG) method to improve the microstructure homogeneity of Ta5+ ion and were compared to those prepared by the conventional mixed oxide (CMO) method. For the PSG method, Ta(OC2H5)5 was directly reacted with calcined [Li0.055(K0.5Na0.5)0.945]NbO3 powders and the specimens sintered at 1100 ℃ for 5 hrs showed a single phase with a perovskite structure. Compared to the specimens prepared by conventional mixed oxide powders, the relative ratio of tetragonal phase to orthorhombic phase of the sintered specimens prepared by Ta(OC2H5)5 was larger than that of the sintered specimens prepared by Ta2O5. The electromechanical coupling factor (kp), piezoelectric constant (d33) and dielectric constant (εr) of the sintered specimens were increased with Ta5+ content. These results could be attributed to the decrease of the orthorhombic-tetragonal polymorphic phase transition temperature (To-t), which could be evaluated by oxygen octahedral distortion. Strain of the sintered specimens prepared by the PSG method was higher than that of specimens prepared by the CMO method due to the increase of relative density. The effects of crystal structure on the strain characteristics of the specimens were also discussed.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.990-998
• /
• 2012

This study investigated the effects of the diet with Cucurbita moschata (CM), adlay seed (AS), and Cudrania tricuspidata leaf (CTL) mixed-powder on the visceral fat, fecal amount, and serum lipid profiles in rats fed a high-fat diet (HFD). The mixed ratio of CM, AS, and CTL as a functional food ingredient was 1:1:1 on a weight basis. Male Sprague-Dawley rats were fed a high-fat diet (D12492; 45 kcal fat) for 5 weeks during the first phase. In the second phase, which lasted 5 weeks, the rats were divided into six experimental groups. The groups were: a high-fat diet group as a control during the 10 weeks of experimental period; and a high-fat diet with 5, 10, 15, 20, and 30% mixed-powder supplement group. The adipose tissue (RFP, EFP) weights were significantly decreased in the 20% and 30% mixed-powder supplement groups than in the HFD group (p<0.05). The fecal weight produced by the 15%, 20%, and 30% mixed-powder supplement groups was significantly increased during the second phase compared to the first phase (p<0.05). In terms of serum lipids, TG (triglyceride) content was decreased in the 10% and 15% mixed-powder supplement groups. The blood glucose levels were significantly decreased in all experimental diet supplement groups than in the HFD group (p<0.05). The findings show that the high supplement groups could improve the visceral fat accumulation, fecal amount, and blood glucose content compared to the HFD group.

• 한국전자현미경학회:학술대회논문집
• /
• 1994.05a
• /
• pp.31-31
• /
• 1994

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.4-5
• /
• 1993