• Nutrition Research and Practice
• /
• 제5권3호
• /
• pp.198-204
• /
• 2011

Target herbal ingredient (THI) is an extract made from two herbs, Scutellariae Radix and Platycodi Radix. It has been developed as a treatment for metabolic diseases such as hyperlipidemia, atherosclerosis, and hypertension. One component of these two herbs has been reported to have anti-inflammatory, anti-hyperlipidemic, and anti-obesity activities. However, there have been no reports about the effects of the mixed extract of these two herbs on metabolic diseases. In this study, we investigated the metabolic effects of THI using a diet-induced obesity (DIO) mouse model. High-fat diet (HFD) mice were orally administered daily with 250 mg/kg of THI. After 10 weeks of treatment, the THI-administered HFD mice showed reduction of body weights and epididymal white adipose tissue weights as well as improved glucose tolerance. In addition, the level of total cholesterol in the serum was markedly reduced. To elucidate the molecular mechanism of the metabolic effects of THI in vitro, 3T3-L1 cells were treated with THI, after which the mRNA levels of adipogenic transcription factors, including C/$EBP{\alpha}$ and $PPAR{\gamma}$, were measured. The results show that the expression of these two transcription factors was down regulated by THI in a dose-dependent manner. We also examined the combinatorial effects of THI and swimming exercise on metabolic status. THI administration simultaneously accompanied by swimming exercise had a synergistic effect on serum cholesterol levels. These findings suggest that THI could be developed as a supplement for improving metabolic status.

• 한국수산과학회지
• /
• 제29권5호
• /
• pp.595-602
• /
• 1996

식품 공장에서 일반적으로 사용하고 있는 살균제인 benzalkonium chloride (BAC)와 sodium hypochlorite (NaOCl)의 Listeria monocytogenes ATCC 15313에 대한 살균 효과를 알아보기 위하여 살균제에 균을 직접 현탁시킨 경우 (in vitro)와 sponge에 균을 접종하여 실험한 경우 (in vivo)를 비교하였다. 먼저 $0\~0.1\%$ BAC와 $0\~150ppm$ NaOCl (유효염소량)을 일정 농도로 조절하여 균을 현탁시킨 결과 BAC의 경우는 $0.25\%$ 이상의 농도에서 0.5분 이내에, 그리고 NaOCl은 100ppm에서 2분이내에 살균효과를 나타내었고 그 이상의 농도에서는 30초 이내에 살균효과를 나타내었다. 그리고 sponge $(6.0{\times}4.0{\times}4.0cm)$에 균 배양액 (약 $10^7\;CFU/ml$, tryptic soy broth) 15ml와 위의 2가지 살균제를 각각 일정 시간 처리한 결과 최초 20분 동안 살균효과가 좋았고 그 이후에는 효과가 감소하였다. BAC $0.1\%$ 이상부터 살균효과가 나타나 $0.25\%$의 경우 20분만에 3-log정도의 균수가 감소되었고 NaOCl도 300ppm 이상에서 살균효과가 나타나 800ppm의 경우 20분만에 3-log 정도의 균수가 감소되었다. 이 sponge를 실제 공장에 응용하기 위하여 modeling하여 살균제의 효과를 실험하였다. 즉 15ml의 배양액과 15ml의 살균제 $(0.25\%\;BAC,\;800ppm\;NaOCl)$를 20분 처리시킨후, 200ml의 멸균증류수로 씻은다음 꼰 짜서 TSB 100m1에 넣어 $5\~37^{\circ}C$에서 배양시키면서 균수의 변화를 관찰하였다. 두 살균제 모두 비슷한 양상을 나타내어 $5^{\circ}C$와 $15^{\circ}C의 경우는 1일 배양에 1-log정도 증가한다음 지속적으로 증식하였고 나머지의 경우도 온도가 높을수록 증식이 활발하였고 배양 $1\~3$일만에 $10^{9}CFU/ml$ 정도로 증식되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권11호
• /
• pp.1514-1524
• /
• 2011

A total of 4,752 monthly lactation records of Friesian cows during the period from 2000 to 2005 were used to estimate genetic parameters and to determine the effect of udder health on milk production traits. Three milk production traits were studied: 305-day milk yield (305-dMY), 305-day fat yield (305-dFY) and 305-day protein yield (305-dPY). Four udder health traits were studied: somatic cell count (SCC), mastitis (MAST), udder health status (UDHS) with 10 categories and udder quarter infection (UDQI) with 7 categories. Mixed model least square analysis was used to estimate the fixed effects of month and year of calving and parity (P) on different studied traits. Sire and dam within sire were included in the model as random effects. Data were analyzed using Multi-trait Derivative Free Restricted Maximum Likelihood methodology (MTDFREML) to estimate genetic parameters. Unadjusted means of 305-dMY, 305-dFY, 305-dPY and SCC were 3,936, 121, 90 kg and 453,000 cells/ml, respectively. Increasing SCC from 300,000 to 2,000,000 cells/ml increased UDQI from 5.51 to 23.2%. Losses in monthly and lactationally milk yields per cow ranged from 17 to 93 and from 135 to 991 kg, respectively. The corresponding losses in monthly and lactationally milk yields return per cow at the same level of SCC ranged from 29.8 to 163 and from 236 to 1,734 Egyptian pounds, respectively. Heritability estimates of 305-dMY, 305-dFY, 305-dPY, SCC, MAST, UDHS, UDQI were 0.31${\pm}$0.4, 0.33${\pm}$0.03, 0.35${\pm}$0.05, 0.23${\pm}$0.02, 0.14${\pm}$0.02, 0.13${\pm}$0.03, and 0.09${\pm}$0.01, respectively. All milk production traits showed slightly unfavorable negative phenotypic and genetic correlations with SCC, MAST, UDHS and UDQI. There were positive and high genetic correlations between SCC and each of MAST (0.85${\pm}$0.7), UDHS (0.87${\pm}$0.10) and UDQI (0.77${\pm}$0.06) and between MAST and each of UDHS (0.91${\pm}$0.11) and UDQI (0.83${\pm}$0.07). It could be concluded that the economic losses from mastitis and high SCC are considerable. The high genetic correlation between SCC and clinical mastitis (CM) suggest that the selection for lower SCC would help to reduce or eliminate the undesirable correlated responses of clinical mastitis associated with selection for increasing milk yield. Additionally, it is recommended also that if direct information on under health traits is not available, measures of SCC can be inclusion in a selection criteria to improve the income from dairy cows.

• 대기
• /
• 제27권4호
• /
• pp.445-453
• /
• 2017

This study investigates turbulent flow around a square cylinder mounted on a flat surface at high Reynolds number using a large-eddy simulation (LES) model, particularly focusing on vortex streets behind the square cylinder. Total 9 simulation cases with different inflow wind directions, inflow wind speeds, and cylinder widths in the x- and y-directions are considered to examine the effects of inflow wind direction, speed, and cylinder widths on turbulent flow and vortex streets. In the control case, the inflow wind parallel to the x-direction has a maximum speed of $5m\;s^{-1}$ and the width and height of the cylinder are 50 m and 200 m, respectively. In all cases, down-drafts in front of the cylinder and updrafts, wakes, and vortex streets behind the cylinder appear. Low-speed flow below the cylinder height and high-speed flow above it are mixed behind the cylinder, resulting in strong negative vertical turbulent momentum flux at the boundary. Accordingly, the magnitude of the vertical turbulent momentum flux is the largest near the cylinder top. In the case of an inflow wind direction of $45^{\circ}$, the height of the boundary is lower than in other cases. As the inflow wind speed increases, the magnitude of the peak in the vertical profile of mean turbulent momentum flux increases due to the increase in speed difference between the low-speed and high-speed flows. As the cylinder width in the y-direction increases, the height of the boundary increases due to the enhanced updrafts near the top of the cylinder. In addition, the magnitude of the peak of the mean turbulent momentum flux increases because the low-speed flow region expands. Spectral analysis shows that the non-dimensional vortex generation frequency in the control case is 0.2 and that the cylinder width in the y-direction and the inflow wind direction affect the non-dimensional vortex generation frequency. The non-dimensional vortex generation frequency increases as the projected width of the cylinder normal to the inflow direction increases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권10호
• /
• pp.1426-1435
• /
• 2014

Saponins have been considered as promising natural substances for mitigating methane emissions from ruminants. However, studies reported that addition of saponin-rich sources often arrived at contrasting results, i.e. either it decreased methane or it did not. The aim of the present study was to assess ruminal methane emissions through a meta-analytical approach of integrating related studies from published papers which described various levels of different saponin-rich sources being added to ruminant feed. A database was constructed from published literature reporting the addition of saponin-rich sources at various levels and then monitoring ruminal methane emissions in vitro. Accordingly, levels of saponin-rich source additions as well as different saponin sources were specified in the database. Apart from methane, other related rumen fermentation parameters were also included in the database, i.e. organic matter digestibility, gas production, pH, ammonia concentration, short-chain fatty acid profiles and protozoal count. A total of 23 studies comprised of 89 data points met the inclusion criteria. The data obtained were subsequently subjected to a statistical meta-analysis based on mixed model methodology. Accordingly, different studies were treated as random effects whereas levels of saponin-rich source additions or different saponin sources were considered as fixed effects. Model statistics used were p-value and root mean square error. Results showed that an addition of increasing levels of a saponin-rich source decreased methane emission per unit of substrate incubated as well as per unit of total gas produced (p<0.05). There was a decrease in acetate proportion (linear pattern; p<0.001) and an increase in propionate proportion (linear pattern; p<0.001) with increasing levels of saponin. Log protozoal count decreased (p<0.05) at higher saponin levels. Comparing between different saponin-rich sources, all saponin sources, i.e. quillaja, tea and yucca saponins produced less methane per unit of total gas than that of control (p<0.05). Although numerically the order of effectiveness of saponin-rich sources in mitigating methane was yucca>tea>quillaja, statistically they did not differ each other. It can be concluded that methane mitigating properties of saponins in the rumen are level- and source-dependent.

• 한국어교육
• /
• 제29권1호
• /
• pp.1-23
• /
• 2018

This paper investigates how adult Mandarin- and English- speaking learners of Korean perceive Korean vowels, with focus on the effect of the first language (L1) and the second language (L2) acoustic relationship, as well as the influence of Korean language experience. For this study, native Mandarin and Canadian English speakers who have learned Korean as a foreign language, as well as a control group of native Korean speakers, participated in two experiments. Experiment 1 was designed to examine acoustic similarities between Korean and English vowels, as well as Korean and Mandarin vowels to predict which Korean vowels are relatively easy, or difficult for L2 learners to perceive. The linear discriminant analysis (Klecka, 1980) based on their L1-L2 acoustic similarity predicted that L2 Mandarin learners would have perceptual difficulty rankings for Korean vowels as follows: (the easiest) /i, a, e/ >> /ɨ, ʌ, o, u/ (most difficult), whereas L2 English learners would have perceptual difficulty rankings for Korean vowels as follows: (the easiest) /i, a, e, ɨ, ʌ/ >> /o, u/ (most difficult). The goal of Experiment 2 was to test how accurately L2 Mandarin and English learners perceive Korean vowels /ɨ, ʌ, o, u/ which are considered to be difficult for L2 learners. The results of a mixed-effects logistic model revealed that English listeners showed higher identification accuracy for Korean vowels than Mandarin listeners, indicating that having a larger L1 vowel inventory than the L2 facilitates L2 vowel perception. However, both groups have the same ranking of Korean vowel perceptual difficulty: ɨ > ʌ > u > o. This finding indicates that adult learners of Korean can perceive the new vowel /ɨ/, which does not exist in their L1, more accurately than the vowel /o/, which is acoustically similar to vowels in their L1, suggesting that L2 learners are more likely to establish additional phonetic categories for new vowels. In terms of the influence of experience with L2, it was found that identification accuracy increases as Korean language experience rises. In other words, the more experienced English and Mandarin learners of Korean are, the more likely they are to have better identification accuracy in Korean vowels than less experienced learners of Korean. Moreover, there is no interaction between L1 background and L2 experience, showing that identification accuracy of Korean vowels is higher as Korean language experience increases regardless of their L1 background. Overall, these findings of the two experiments demonstrated that acoustic similarity between L1 and L2 sounds using the LDA model can partially predict perceptual difficulty in L2 acquisition, indicating that other factors such as perceptual similarity between L1 and L2, the merge of Korean /o/ and /u/ may also influence their Korean vowel perception.

• Nutrition Research and Practice
• /
• 제15권6호
• /
• pp.715-731
• /
• 2021

BACKGROUND/OBJECTIVES: Premenstrual syndrome (PMS) is a disorder characterized by repeated emotional, behavioral, and physical symptoms before menstruation, and the exact cause and mechanism are uncertain. Hyperprolactinemia interferes with the normal production of estrogen and progesterone, leading to PMS symptoms. Thus, we judged that the inhibition of prolactin hypersecretion could mitigate PMS symptoms. MATERIALS/METHODS: Hordeum vulgare L. extract (HVE), Chrysanthemum zawadskii var. latilobum extract (CZE), and Lomens-P0 the mixture of these extracts were tested in subsequent experiments. The effect of extracts on prolactin secretion at the in vitro level was measured in GH3 cells. Nitric oxide and pro-inflammatory mediator expression were measured in RAW 264.7 cells to confirm the anti-inflammatory effect. Also, the hyperprolactinemic Institute for Cancer Research (ICR) mice model was used to measure extract effects on prolactin and hormone secretion and uterine inflammation. RESULTS: Anti-inflammatory effects of and prolactin secretion suppress by HVE and CZE were confirmed through in vitro experiments (P < 0.05). Treatment with Lomens-P0 inhibited prolactin secretion (P < 0.05) and restored normal sex hormone secretion in the hyperprolactinemia mice model. In addition, extracts significantly inhibited the expression of pro-inflammatory biomarkers, including interleukin-1𝛽, and -6, tumor necrosis factor-𝛼, inducible nitric oxide synthase, and cyclooxygenase-2 (P < 0.01). We used high-performance liquid chromatography analyses to identify tricin and chlorogenic acid as the respective components of HVE and CZE that inhibit prolactin secretion. The Lomens-P0, which includes tricin and chlorogenic acid, is expected to be effective in improving PMS symptoms in the human body. CONCLUSIONS: The Lomens-P0 suppressed the prolactin secretion in hyperprolactinemia mice, normalized the sex hormone imbalance, and significantly suppressed the expression of inflammatory markers in uterine tissue. This study suggests that Lomens-P0 may have the potential to prevent or remedy materials to PMS symptoms.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.407-408
• /
• 2011

Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.333-340
• /
• 2012

경량골재 콘크리트의 압축강도에 대한 크기 및 형상효과를 평가하기 위하여 9 배합의 실내 실험과 3 배합의 레미콘 배합을 수행하였다. 콘크리트 배합은 보통중량, 전경량 및 모래경량의 3그룹으로 분류되었다. 각 콘크리트 배합에서 원형 또는 사각형 단면을 갖는 시험체의 형상비는 1.0과 2.0이었다. 시험체의 단면 크기는 각 실내배합에서는 50~150mm, 각 레미콘 배합에서는 50~400mm 범위에 있었다. 실험 결과 경량골재 콘크리트의 균열진전과 국부 파괴영역은 보통중량 콘크리트와 상당히 달랐다. 경량골재 콘크리트에서 균열은 골재를 관통하였으며, 균열의 분포영역은 매우 국부적이었다. 이로 인해, 경량골재 콘크리트의 크기효과는 보통중량 콘크리트에 비해 더 크게 나타났으며, 이 현상은 형상비 1.0보다는 2.0인 시험체에서 더 뚜렷하게 나타났다. 김진근 등의 크기효과 예측모델은 경량골재 콘크리트에서 시험체 단면크기가 150mm 이상일 때 과대 평가하였다. 반면, 압축강도에 대한 시험체 형상의 영향을 보정하기 위해 ASTM 및 CEB-FIP에서 제시한 수정계수는 경량골재 콘크리트에서도 안전측에 있었다.

• 치과방사선
• /
• 제26권2호
• /
• pp.133-145
• /
• 1996

Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.