• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.10
• /
• pp.1242-1251
• /
• 2011

This study investigates the effect of mixed characteristics of oily soil such as mixed ratio, polarity of oily soil on contact angle of fabric, removal of oily and particulate soil from PET fabric in oily/particulate soil mixed system. The contact angle of fabric in the surfactant solution with suspended oily soil was examined as a fundamental environment of detergency of soil from fabrics. Detergency was investigated as function of mixed ratios of oily/ particulate soil, type of oily soil, surfactants concentration, surfactant type and temperature of detergency in surfactant solution. The contact angle of fabric in surfactant solution sharply increased with mixing nonpolar oily soil; in addition, the contact angle slightly increased with increasing contents of oily soil and decreased with increasing surfactant concentration. The removal of oily and particulate soil from fabric was higher in the solution mixed with polar versus nonpolar oily soil. The detergency increased with increasing surfactant concentration and the increased temperature of surfactants solution that were relatively improved in NPE compared to DBS solutions, The results indicated that the detergency of oily and particulate soil showed a similar trend in oily/ particulate mixed soil systems. The general contact angle of fabric was well related with the detergency of oily and particulate soil in oily/particulate mixed soil system, therefore, the primary factor determining the detergency of soil in oily/particulate mixed soil system may be the contact angle of fabric caused by wettability.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.1009-1014
• /
• 2001

In aqueous mixtures of cationic OTAC (octadecyl trimethyl ammonium chloride) and anionic ADS (ammonium dodecyl sulfate) surfactants, mixed micelles were formed at low (< 0.2 wt %) total surfactant concentrations. For these mixtures mixed micelliza tion and interaction of surfactant molecules were examined. Mixed critical micelle concentration (CMC), thermodynamic potentials of micellization, and minimum area per surfactant molecule at the interface were obtained from surface tensiometry and electrical conductometry. The mixed micellar compositions and the estimation of interacting forces were determined on the basis of a regular solution model. The CMCs were reduced, although not substantial, and synergistic behavior of the ADS and OTAC in the mixed micelles was observed. The CMC reductions in this anionic/cationic system were comparable to those in nonionic/anionic surfactant systems. The interaction parameter $\beta$ of the regular solution model was estimated to be -5 and this negative value of $\beta$ indicated an overall attractive force in the mixed state.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.438-447
• /
• 2020

The critical micelle concentration (CMC) values of the mixed surfactant systems and the solubilization conatant (K_s) values of 4-ethylaniline in those solutions were measured and analyzed by the UV-Vis method. As a result, the mixed surfactant systems of TTAB/LSB and TTAB/TX-100 did not deviate significantly from ideal mixed micellization. However, the mixed systems of SDS/LSB and SDS/TX-100 showed great negative deviations from ideal mixed model. These differences showed that the intensity of the interaction between two components in the mixed micelle was different for each mixed system and that these differences greatly influenced the solubilization of 4-ethylaniline by a mixed surfactant system. Among pure surfactants, an anionic surfactant such as SDS showed a greater K_s value than other ionic surfactants, and the K_s value by each surfactant system decreased in the order of SDS≫TTAB≧LSB>TX-100. In addition, the K_s values of all the mixed surfactant systems were higher than those of the pure surfactants constituting the mixed systems.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.667-674
• /
• 2007

Phase behavior for the mixed aqueous surfactant systems of cationic octadecyl trimethyl ammonium chloride (OTAC)/anionic ammonium dodecyl sulfate (ADS)/water was examined. Below the total surfactant concentrations of 1.5 m molal, mixed micelles were formed. At the total surfactant concentrations higher than 1.5 m molal, there appeared a region where mixed micelles and vesicles coexist. As the surfactant concentration increased, the systems looked very turbid and much more vesicles were observed. The vesicles were spontaneously formed in this system and their existence was observed by negative-staining transmission electron microscopy (TEM), small-angle neutron scattering (SANS) and encapsulation efficiency of dye. The vesicle region was where the molar fraction α of ADS to the total mixed surfactant was from 0.1 to 0.7 and the total surfactant concentration was above 5 × 10-4 molality. The size and structure of the vesicles were determined from the TEM microphotographs and the SANS data. Their diameter ranged from 450 nm to 120μm and decreased with increasing total surfactant concentration. The lamellar thickness also decreased from 15 nm to 5 nm with increasing surfactant concentration and this may be responsible for the decrease in vesicle size with the surfactant concentration. The stability of vesicles was examined by UV spectroscopy and zeta potentiometry. The vesicles displayed long-term stability, as UV absorbance spectra remained unchanged over two months. The zeta potentials of the vesicles were large in magnitude (40-70 mV) and the observed longterm stability of the vesicles may be attributed to such high ζ potentials.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.38-45
• /
• 2007

Trichloroethylene (TCE) is a representative dense non-aqueous phase liquid (DNAPL) and has contaminated substance environments including soil and groundwater due to leakage and careless. DNPAL, has been treated by surfactant-enhanced aquifer remediation (SEAR). After application of SEAR, groundwater contains still surfactant as well as little amount of residual TCE. Permeable reactive barrier using zero-valent iron (ZW) is a very effective technology to treat the residual TCE in groundwater. In this study, the effect of the residual surfactant on the reductive dechlorination of residual TCE was investigated using ZVI. Mixed surfactant composed of nonioinic surfactant and cationic surfactant was used as a residual surfactant because of toxicity and enhancement of dechlorination rate. Structure of surfactant affected significantly the decrhlorination rate of TCE. Mixed surfactant system with relatively short polyethylene oxide (PEO) chain in nonionic surfactant, cationic surfactant did not affect TCE dechlorination rate. However, mixed surfactant system with relatively long PEO chain in nonionic surfactant shows that TCE dechlorination rate was significantly dependent on fraction of cationic surfactant and HLB of nonionic surfactant. Cationic surfactant with trimethyl ammonium group enhanced reductive dechlorination rate compared to that surfactant with pyridinium group.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.417-421
• /
• 2003

Three kinds of surfactant systems - cationic surfactant (system 1), combinition of two cationic surfactants (system 2), and combination of two cationic surfactant and non-ionic surfactant (system 3) - for the simultaneous removal of nitrate and phosphate by micellar-enhanced ultrafiltration (MEUF) were investigated. The highest removal efficiencies of nitrate and phosphate were observed in system 2, which were 90 % of nitrate and 72 % of phosphate. The COD of permeate in system 3 was the lowest, because the added non-ionic surfactant made critical micelle concentration (CMC) lower than that of other surfactant systems. In all systems, the flux decline was similar.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.113-116
• /
• 1986

Spectral behaviors of cationic dyes, methylene blue(MB) and acridine orange(AO), with varying concentrations of sodium dodecylsulfate(SDS) were studied. At low concentration of SDS(<1mM), these dyes formed insoluble dye-surfactant aggregates. When [SDS] is 4-5 mM, the aggregates were dissolved into mixed micelles of constant composition. At higher concentration of [SDS], the composition of mixed micelles were changed with [SDS], resulting only monomeric form of dyes in micelles. AO-SDS system showed greater aggregating and less dissolving properties, and weaker effect of salt than MB-SDS system did. These were attributed to the greater hydrophobic nature of the former dye. The monomer/dimer ratios of dyes in mixed micelles at given [SDS] were greatest at $20^{\circ}C$, reflecting the dependency of CMC of the surfactant on temperature.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.330-342
• /
• 2003

The formation of emulsions and micelles in water/ceramide PC104/CholE $O_{20}$/C$_{16}$E $O_{20}$ and water/ceramide PC104/CholE $O_{20}$ mixtures was investigated through the phase behavior studies. The phase diagrams showed the existence of micelle and emulsion regions in both systems. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) showed the wider micellar and emulsion regions than the single surfactant system (CholE $O_{20}$). From FT-IR measurements, it was found that the polyoxyethylene (POE) groups of surfactants formed the hydrogen bonds with amido carbonyl group in ceramide PC104. This result indicated that the hydrophilic part (EO) of surfactants could stabilize the lamellar structure and emulsion of ceramide PC104. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) resulted in the smaller emulsion droplet size due to the effect of curvature at the interface, thus further increasing emulsion stability. With the penetration of $C_{16}$E $O_{20}$into the interfacial layer of surfactants in emulsion, the curvature of the interface might be altered for the formation of smaller emulsion droplets. The mixed surfactant system could incorporate up to 4 wt. % of ceramide PC104 into emulsion more than single surfactant system.ystem.m.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.379-384
• /
• 2011

The critical micelle concentration (CMC) and the counter ion binding constant (B) for the mixed micellizations of DBS (sodium dodecylbenzenesulfonate), SDS (sodium dodecylsulfate), and Brij 30 (polyoxyethylene(4) lauryl ether) at $25^{\circ}C$ in pure water were determined by the use of electric conductivity and surface tension measuring methods. Various thermodynamic parameters ($X_i,\;{\gamma}i,\;C_i,\;a_i^M,\;{\beta}$, and ${\Delta}H_{mix}$) were calculated and compared with each other mixed surfactant system by means of the equations derived from the nonideal mixed micellar model. The results show that the SDS molecule interacts more strongly with Brij 30 molecule than DBS molecule and that the SDS/Brij 30 mixed surfactant system has the greatest negative deviation from the ideal mixed micellar model and the SDS/DBS mixed system has followed almost the ideal mixed micellar model.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.523-530
• /
• 1999

Acrylic pressure-sensitive adhesive has been made utilizing organic solvents, but nowadays it is made by solvent-free system due to environmental problems. In this study, emulsion polymerization were carried out at $40^{\circ}C$ with methacrylic acid(MAA), n-butyl acrylate(n-BA) and 2-ethylhexyl acrylate(2-EHA) as monomers in the presence of anionic(sodium dodecyl sulfate, SDS) and nonionic(ethylene oxide types) surfactant mixtures. The overall conversion of the polymerization reaction in a mixed surfactant system was found to be higher than that in a single surfactant system. Emulsion stability in mixed or anionic surfactant systems was found to be over 12 week, which was better than that in nonionic surfactant system. Emulsion particle size decreased as surfactant content increased. The Tg and molecular weight of emulsion polymer were inependent of the type, the amount and the mixing ratio of surfactant. Based on the results of stability and peel strength, the optimum nonionic surfactant ratio in total 4 g of surfactant mixture systems is found to be 40~60% by weight where the nonionic surfactant has 50 ethylene oxide groups and 16~18 carbon atoms in hydrophobic alkyl chain.