• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.232-247
• /
• 1987

Three rice varietis, Dongjinbyeo, Daecheongbyeo and Chucheongbyeo, which are leading cultivars in the Chungnam area, were planted to determine their effects of mixture on the plant characteristics and the blast occurrence. The summary obtained is as follows; 1. The heading dates of each cultivars were not affected by the mixing culture. Only a day was delayed in heading date of Chucheongbyeo under commonly standard fertilizer level. 2. The effects of cultivar mixture on the plant height was high when low level of fertilizer were applied. Of the cultivar mixture, the mixing of Dongjinbyeo and Daecheongbyeo shoed 5.1% of plant height increase. The effects of mixture on the tillering number were apparent only under the standard fertilizer level. The mixture of Dongjinbyeo and Chucheongbyeo was effective in increasing the tillering number up to 5.7% over mean tillering number of each cultivars. 3. The stem height tended to increase as the fertilizer level increased and the effects of cultivar mixture on the stem height was high. The stem height of mixture of Dongjinbyeo and Daecheongbyeo was highest compared with other mixture cropping. On the contrary, the panicle length was shortened as the fertilizer level decreased and cultivars were mixed. Among the cultivar mixtures, the mixture of Dongjinbyeo and Daecheongbyeo showed the most effectives of increasing the panicle length. 4. The total dry weight of mixed and pure cultivars were compared. The mixture of two cultivars was effective in increasing the dry weight of rice upto 3.5% over the average of dry weight of each cultivars. When three cultivars were mixed, there were 8.5% of dry weight increase over not mixed cultivars. The effects of mixture on the dry weight were more apparent under standard fertilizer level. 5. The rates of Neck and Node and Branch Blast occurrence were reduced when cultivars were mixed, and their reduction rates were 11.7% and 14.0%, respectively. The occurrence of Blasts was also decreased under the lowest fertilizer level than the standard fertilizer level. The least Blast occurrence was obtained when Dongjinbyeo and Daecheongbyeo were mixed cropped. 6. Significantly high number of spikelets of per square meter was observed when Chucheongbyeo and Dongjinbyeo were mixed. However, the spikelets of panicle were the lowest when Chucheongbyeo and Dongjinbyeo were mixed. The number of panicles per square meter was increased as the fertilizer levels increased, while the number of spikelets per panicle increased as the fertilizer level decreased. 7. The effects of mixture on the maturing were apparent regardless of the fertilizer level. The 1000 grain weight was higher when lower level of fertilizer was applied. The effects of cultivar mixture on the 1000 grain weight were more apparent in the plots of Chucheongbyeo and Dongjinbyeo mixture and three cultivar mixture. 8. The grain yield increased when cultivars mixed. The increment under mixing cropping was 4.6% over mono cropping. The effects of cultivar mixture on the yield increase were more apparent under lower levels of fertilizer application. The highest yield increase was obtained when Chucheongbyeo and Daecheongbyeo were mixed, and the rate of yield increase was 6.8% over mono-cropping. 9. The grain yield was highly correlated with number of panicles per square meter and dry weight. There was not any significant relationships found among grain yield, spikelets of panicle and ripening percentage.

• Korean Journal of Environment and Ecology
• /
• v.6 no.2
• /
• pp.162-167
• /
• 1993

A mixed deciduous forest community in Mt. Sobaek was studied to determine the adequate number of plots of tree stratum for investigating forest community structure. Twenty l0m $\times$ l0m plots were set up iii the studied forest community, and species area curve. performance curve and statistical method were carried out. According to species-area curve, the minimal number of plots where a given percentage increase in number of plots produced less than the same percentage increase in number of species was eight. The minimal number of plots where a given percentage increase in number of plots produced less than the half of the percentage increase in number of plots was eleven. According to performance curve by importance value of the major species, the minimal number of plots where the dominant species was distinguished from the subdominant species was five. The minimal number of plots where the subdominant species was distinguished from each other was ten. Therefore, ten l0m $\times$ l0m plots seems to give an adequate sample for investigating structure of the studied forest community. Similarity index between the ten plots and total twenty plots was above 90%, and 95% confidence interval of species diversity of the ten plots was $\pm$ 0.073.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.157-160
• /
• 2011

This study was conducted to find a method using the application of rice bran and mixed expeller cake at machine transplanting rice paddy field. Different ratios of rice bran and mixed expeller cake were sprayed as substitute of chemical fertilizer (nitrogen 90kg $ha^{-1}$) before transplanting. Nitrogen content was highest in 30th day after transplantation, and in relation to treatments the order was the following: Rice bran 1,000kg $ha^{-1}$ + Mixed expeller cake 1,374kg $ha^{-1}$ > rice bran 2,000kg $ha^{-1}$ + Mixed expeller cake 948kg $ha^{-1}$ > rice bran 3,000kg $ha^{-1}$ + Mixed expeller cake 522kg $ha^{-1}$. Number of panicle and spikelets per $m^{-2}$ was higher in rice bran 1,000kg $ha^{-1}$ + Mixed expeller cake 1,374kg $ha^{-1}$ and rice bran 2,000kg $ha^{-1}$ + Mixed expeller cake 948kg $ha^{-1}$ than in rice bran 3,000kg $ha^{-1}$ + Mixed expeller cake 522kg $ha^{-1}$ and the yields was the highest in rice bran 1,000kg $ha^{-1}$ + Mixed expeller cake 1,374kg $ha^{-1}$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.771-779
• /
• 1989

Numerical analysis by SIMPLE algorithm has been performed to predict the characteristics of flow and heat transfer in channels between the printed circuit boards of an electronic cabinet. It is assumed that the electronic parts release uniform heat flux per unit axial length to the cooling air. The air flow between channels is assumed fully developed laminar, incompressible, and mixed convective. In this study, the electronic parts are mounted on both sides of the prinked circuit boards by two kinds of configuration such as the zig-zag and the symmetric one. The Rayleigh numbers ranging from 0 to 10$^{6}$ are considered to predict the characteristics of the main flow and the secondary flow occurred by natural convection, the temperature distribution in channel, the heat transfer rate from heated electronic parts and the increase of friction factor by natural convection. As the results of numerical calculation, several conclusions are drawn as follows. The influence of natural convection on the flow characteristics appears strong when the Rayleigh number is above 10$^{4}$. The main axial flow rate decreases by a half or more at the Rayleigh number of 10$^{6}$ . Although the friction factor increases as Rayleigh number increases, the increasing rate of heat transfer is higher than that of the friction factor. The cooling efficiency of the zig-zig-configuration is superior to that of the symmetric configuration at same Rayleigh number.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.2
• /
• pp.184-195
• /
• 1995

A theoretical one-dimensional model for the charging process in stratified thermal storage tanks is established presuming that the fluid ensuing from the tank inlet creates a perfectly mixed, layer above the thermocline. Both the generic and asymptotic closed-form solutions are obtained via the Laplace transformation. The asymptotic solution describes the nature of the charging pertaining to the case of no thermal diffusion, whereas the generic solution is of practical importance to understand the role of operating parameters on the stratification. The present model is validated through comparison with available experimental data, where they agree well with each other within a reasonable limit. An interpretation of the exact solution entails two important features associated with the charging process. The first is that an in-crease in the mixing depth $h_m$ causes a relatively slow temperature rise in the perfectly mixed region, but on the other hand it results in a faster decay of the overall temperature gradient across the thermocline. Next is the predominance of the mixing depth in the presence of the prefectly mixed region. In such a case the effect of the Peclet number is marginal and there-fore the thermal characteristics are solely dependent on the mixing depth paticularly for large $h_m$. The Peclet number affects significantly only for the case without mixing. Variation of the storage efficiency in response to the change in the mass flow rate agrees favorably with the published experimental results, which confirms the utility of the present study.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.799-811
• /
• 2016

Purpose: The conjoint analyst in marketing are interested in detecting whether there exist synergy or antagonistic effects between two attributes. In the cases where attributes have two or three levels, we research on the design of survey questionnaire to estimate all the main effect and as many two factor interaction effects as possible. Methods: We consider the balanced incomplete block (BIB) mixed level factorial design $2^f{\times}3^g$ or fractional factorial design. To reduce the number of questions in a questionnaire, we propose the balanced incomplete block mixed level design with minimum aberration which is generated by implementing proc factex in SAS. Also, we propose using two or three level BIB factorial design instead of mixed level designs by transforming three level attributes into two attributes of two levels and two level attribute into three level attribute by using dummy level technique. Results: We propose three methods for designing survey questionnaire where the block and design generators are found with practical number of questions in a questionnaire. By analyzing all the respondents survey data generated by the simulation study, we find the proper model and do the concepts optimization. Conclusion: The proposed methods of designing survey questionnaires seem to perform well in the sense that the proper model, and then the optimal concept is found in a case study where all the respondents survey data are generated by the simulation study.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.4
• /
• pp.401-408
• /
• 2013

The objective of this study was to determine the quality characteristics of cabbage juice fermented by lactic acid bacteria from Kimchi (Leuconostoc mesenteroides, Lactobacillus sakei SL1103, Lactobacillus plantarum LS5, and mixed starter). Cabbage juice was inoculated with lactic acid bacteria and fermented at 30 for 72 hrs. Changes in lactic acid bacteria number, pH, titratable acidity, Brix, and color during fermentation were analyzed. After fermentation for 24 hrs, cabbage juice fermented by mixed starter showed the highest number of lactic acid bacteria (9.45 log CFU/mL). The pH of all cabbage juice also decreased to 3.88~4.19 sharply, while cabbage juice fermented by Lac. sakei SL1103 showed the highest Brix ($8.38^{\circ}Bx$). Cabbage juice fermented by mixed starter showed the highest L value (56.83). In the sensory evaluation, cabbage juice fermented by a mixed starter (Leu. mesenteroides, Lac. sakei SL1103, and Lac. plantarum LS5) showed the highest preferences in taste, flavor, and overall acceptability. Therefore, cabbage juice fermented by mixed starter (Leu. mesenteroides, Lac. sakei SL1103 and Lac. plantarum LS5) has the highest potential for the development of fermented cabbage juice as an excellent bioactive functional food.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.101-109
• /
• 2017

This paper presents a high-throughput low-complexity 512-point eight-parallel mixed-radix multipath delay feedback (MDF) fast Fourier transform (FFT) processor architecture for orthogonal frequency division multiplexing (OFDM) applications. To decrease the number of twiddle factor (TF) multiplications, a mixed-radix $2^4/2^3$ FFT algorithm is adopted. Moreover, a dual-path shared canonical signed digit (CSD) complex constant multiplier using a multi-layer scheme is proposed for reducing the hardware complexity of the TF multiplication. The proposed FFT processor is implemented using TSMC 90-nm CMOS technology. The synthesis results demonstrate that the proposed FFT processor can lead to a 16% reduction in hardware complexity and higher throughput compared to conventional architectures.

• Journal of Power System Engineering
• /
• v.20 no.6
• /
• pp.51-57
• /
• 2016

Experiment is carried out to investigate the mixed convective flow in three-dimensional horizontal rectangular channels filled with high viscous fluid. The particle image velocimetry(PIV) with thermo-sensitive liquid crystal tracers is used for visualizing and analysis. Quantitative data of temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. In this study, the fluid used is silicon oil(Pr=909), the aspect ratio(channel width to heigh) is 4 and Reynolds number is $2{\times}10^{-2}$. From the present study, we can visualize the quantitative temperature and velocity of mixed convective flow in three-dimensional horizontal rectangular channels simultaneously.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.277-284
• /
• 2004

This paper describes the influence of through-flow on the mixed convection in a parallel plates with the upper part is cooled and the lower part heated. When forced convection is imposed on natural convection, it is found that the flow pattern of mixed convection in the parallel plates can be classified into three patterns which were affected by Reynolds number. In such a mixed convection, the flow pattern plays an important role in the heat transfer process. In this study, thermo-sensitive liquid crystal suspension method is employed, then the visualization image acquired through the above method is processed by the color image processing technique and the two-dimensional velocity vector and temperature configuration are measured simultaneously.