• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.920-927
• /
• 2000

A multi-layered orthotropic material with a center crack is subjected to an anti-plane shear loading. The problem is formulated as a mixed boundary value problem by using the Fourier integral transform method. This gives a Fredholm integral equation of the second kind. The integral equation is solved numerically and anti-plane shear stress intensity factors are analyzed in terms of the material orthotropy for each layer, number of layers, crack length to layer thickness and the order of the loading polynomial. Also, the case of monolithic and hybrid composites are investigated in terms of the local fiber volume fraction and the global fiber volume fraction.

• 대한산업공학회지
• /
• 제23권1호
• /
• pp.55-76
• /
• 1997

This paper presents a heuristic solution for the three dimensional container loading problem with boxes which are different in size. The container loading problem is formulated as a zero-one mixed integer programming model whose objective is to maximize the container utilization. Due to its problem complexity, we propose a heuristic based on layered loading technique. Also, presented is a way to achieve the weighting balance of the stacked boxes. A micro-computer based program is developed which generates container loading pattern provided by the proposed heuristic. The results are displayed by computer-graphic. To evaluate the performance of the proposed heuristic, computational experiments are performed. The results indicate that in most of the cases the proposed heuristic performs better than an existing heuristic in terms of the container utilization.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1754-1759
• /
• 2007

Propagation of a mixed-mode crack in Soda-Lime silica glass using Movable Cellular Automata (MCA) method is demonstrated in this study. In MCA method, special fracture criterion is used to describe the process of crack initiation and propagation. Comparison between MCA and other crack initiation criteria results are made. The crack resistance curves and bifurcation angles under different loading angles are found. In comparisons with results of maximum circumferential tensile stress criterion, MCA result showed the sufficient agreement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.103-103
• /
• 2004

실제 작용하는 하중상태는 요소의 형상과 작용하중의 복잡성 때문에 혼합모드 하중상태를 나타낸다. 또한 혼합모드 피로균열은 전파과정 동안 부재의 구속형상이나 외부 작용하중의 급격한 변화에 의해서도 영향 받게 된다. 이로 인하여 피로균열은 균열선단에서 지속적이면서 급격한 응력 재분배의 상태를 경험한다. 그러므로 다양한 응력 재분배 상태에서의 혼합모드 피로균열에 대한 고찰이 필요하다. 본 연구에서는 응력 재분배상태 하에서 나타나는 혼합모드 피로균열의 전파거동에 대한 특징이 실험적으로 고찰되었다.(중략)

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.828-834
• /
• 2002

In this paper, for the mixed mode fatigue problem, the method of determining testing load was proposed. It is based on the plastic zone size and the limited maximum stress intensity factor by ASTM STANDARD E 647-00. The application method of maximum tangential stress criterion and the stress intensity factor for the finite width specimen was proposed. In the result of applying the method to mixed mode fat gut test for A5052 H34, it obtained the satisfactory experimental results on the stable crack growth.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.1039-1047
• /
• 1999

It is necessary to evaluate the fatigue behavior of rail steel under the multi-axial stress state to assure the railway vehicle's safety. For this purpose, the stress analysis to investigate the crack initiation criteria, static failure and fatigue behavior under mixed-mode are performed. The stress analysis results show that the initiation of the transverse fissure depends on the maximum shear stress below the surface. For the mixed mode, the fatigue crack growth behavior which is represented by the projection crack length and comparative S.I.F, ${\Delta}K_v$, shows the more conservative results. Also, its rate is lower than that of the case of the mode I, and this difference decreases with increasing the stress ratio, R.

• Structural Engineering and Mechanics
• /
• 제58권2호
• /
• pp.217-230
• /
• 2016

Effects of temperature dependent material properties on mixed mode fracture parameters of functionally graded materials subjected to thermal loading are investigated. A domain form of the $J_k$-integral method including temperature-dependent material properties and its numerical implementation using finite element analysis is presented. Temperature and displacement fields are calculated using finite element analysis and are used to compute mixed mode stress intensity factors using the $J_k$-integral. Numerical results indicate that temperature-dependency of material properties has considerable effect on the mixed-mode stress intensity factors of cracked functionally graded structures.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2226-2240
• /
• 1992

본 연구에서는 이방성체에 대한 구체적인 코스틱스 실험법을 확립하기 위하여 다음과 같은 연구를 수행 하였다. 첫째, 이방성체에 대한 코스틱스상 및 초기곡선의 사상방정식을 기하광학 및 Sih의 응력장을 이용하여 구하고, 이 식에 의한 이론상을 여러가지 경계조건하에서 컴퓨터 그래픽 하여 유도한 사상방정식의 타당성을 검토 하 였다.둘째, 본 논문에서 개발한 두 가지 종류의 직교이방성체를 사용하여 실험을 수행하고 실험에 의한 코스틱스상을 이론상과 비교, 검토 하였다.셋째, 이방성체의 코스틱스상으로부터 응력확대계수를 구하는 방법을 제시하고 이 방법을 실제 시편에 적용하여 신뢰 할수 있는 결과를 얻는 초기곡선의 범위를 결정 하였다. 그리고 이 범위에서 구한 응력확대 계수 값을 경계요소법을 이용한 변위외삽법에 의한 결과와 비 교함으로써 본 논문에서 제시하는 방법이 이방성체의 응력확대계수를 구하는 한 방법 으로 유효하게 사용될 수 있음을 밝혔다.

• 대한토목학회논문집
• /
• 제28권2A호
• /
• pp.207-214
• /
• 2008

본 논문에서는 연계논문에서 제안된 혼합구조 접합부의 개선정도를 확인하기 위하여 2개의 혼합구조 실험체에 대하여 4절점 휨시험을 수행하였다. 혼합구조 접합부의 거동 분석을 위하여 3차원 비선형해석 결과와 실재하 실험 결과를 하중-처짐 관계, 하중-변형률 관계, 접합부 개구폭, 균열과 파괴모드를 통하여 비교하였다. 3차원 비선형 해석을 위하여 접촉요소를 사용하였으며 해석프로그램은 범용 구조 해석프로그램인 아바쿠스를 이용하였다. 실험과 해석의 결과로부터 제안된 L 모양의 접합부가 휨하중에서 기존안보다 강성이 크게 나타났으며, 보다 나은 구조적 성능을 나타냄을 확인하였다.