• 대한소아치과학회지
• /
• 제38권1호
• /
• pp.44-50
• /
• 2011

미성숙 영구치의 치수가 괴사되면, 치근 형성이 더 이상 이루어지지 않아 치근벽이 매우 얇고, 치근단공이 열려 있어 근관치료를 시행하기가 매우 어렵다. 치수가 괴사되고, 치근단 병소가 있는 치아의 근관치료를 시행할 때 가장 중요한 것은 감염된 근관계를 소독하는 것이다. 이러한 소독은 근관 내 기계적인 기구 조작, 근관 세척, 근관 내 약제를 통해서 이루어질 수 있는데, 최근 ciprofloxacin, metronidazole, minocycline의 세 가지 항생제 조합을 이용하여 근관 내 병원균을 제거하고, 치수의 재혈관화를 도모하여, 치근의 지속적인 성장을 유도한 연구와 증례가 많이 보고되고 있다. 이러한 재생적인근관 치료는 미성숙 영구치를 치료함에 있어서 통법적인 치근단형성술보다 보존적인 치료법으로서 널리 이용될 것이라 사료된다. 본 증례는 치외치의 교두파절로 인하여 치수가 괴사되고, 치근단 병소가 생긴 미성숙 영구치를 주소로 내원한 두 환아에 대하여 세 가지 항생제 조합을 근관 내 약제로 이용하여 치료한 바, 성공적인 치료결과를 보여 이를 보고하는 바이다.

• 간호행정학회지
• /
• 제12권1호
• /
• pp.14-22
• /
• 2006

Purpose: The purpose of this study is developing the nursing information system which contains the core elements of nursing practice, the Nursing Minimum Data Set (NMDS) that should be collected and documented all the settings in which nursing care is provided. Method: The program was developed under the hospital information system by TCP/IP protocol and used NANDA, Nursing Interventions Classification (NIC), and Nursing Outcomes Classification (NOC) to fill out the elements of NMDS. The Oracle was used as DBMS under the Windows 98 environment and Power Builder 5.0 was used as a program language. Results: This study developed linkage among the NANDA-NOC-NIC to facilitate choosing correct nursing diagnosis, interventions, and outcomes and stimulate nurses' critical thinking. Also the system developed includes nursing care sensitive patient outcomes, so nurses can actively involve in nursing effectiveness research by analyzing the data stored in the database or by making relational databases with other health care related databases. Conclusion: The program developed in this study ultimately can be used for the nursing research, policy development, reimbursement of nursing care, and calculating staffing and nursing skill mix by providing tool to describe and organize nursing practice and measure the nursing care effectiveness.

• 콘크리트학회논문집
• /
• 제27권1호
• /
• pp.21-28
• /
• 2015

최근에 콘크리트 모듈로 건설하는 부유 구조물에 대한 연구가 활발히 이루어짐에 따라 콘크리트 모듈 간 접합 공법에 대한 필요성이 대두되고 있다. 모듈 간 접합 작업은 수중에서 프리스트레싱 텐던을 긴장하여 이루어지므로 시공성이 저하될 가능성이 있어서 가접합을 위한 부착재료 개발이 요구된다. 이번 연구에서는 콘크리트 구조물 보수보강용 섬유보강 패널 부착에 사용된 수중용 에폭시에 $SiO_2$ 계열 마이크로 실리카(Micro-silica : MS)를 혼입하여 콘크리트 모듈 가접합용 접합재료를 개발, 평가하였다. 기존 수중용 에폭시에 0~4% MS를 혼입하여 부착성능 평가를 통하여 최적 MS 혼입량을 산정하였으며 수중용 에폭시의 점도에 따른 MS 혼입 효과를 확인하기 위하여 주제 비율을 각각 0, ${\pm}5$%, ${\pm}10%$로 조정하여 재료성능을 검토한 후 최적 비율을 도출하였다. 도출된 마이크로 실리카 수중용 에폭시(MSAE)의 콘크리트 모듈 접합 성능을 검증하기 위하여 콘크리트 모듈 접합 시험체에 3점 재하 실험을 실시한 결과 MSAE는 기존 수중용 에폭시에 비해 콘크리트 모듈 접합 성능이 크게 향상된 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제32권5호
• /
• pp.685-699
• /
• 2009

Current research and development of high performance concrete, together with study of phenomena that are pertinent to impact resistance, have lead to a new generation of barriers with improved properties to resist impact loads. The paper reviews major properties and mechanisms that affect impact resistance of concrete barriers as per criteria that characterize the resistance. These criteria are the perforation limit, penetration depth and the amount of front and rear face damage. From the long-known, single strength parameter that used to represent the barriers' impact resistance, more of the concrete mix ingredients are now considered to be effective in determining it. It is shown that the size and hardness of the aggregates, use of steel fibers and micro-silica have different effects on performance under impact and on the resistance. Additional pertinent phenomena, such as the rate and size effects, confinement and local versus global response, are pointed out with their reference to possible future developments in the design of impact resisting concrete barriers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.695-702
• /
• 2002

Shotcrete (or Sprayed concrete) has been used as an important support material in New Austrian Tunnelling Method (NATM). Since the mid of 1990, permanent shotcrete tunnel linings such as Single-shell, NMT (Norwegian Method of Tunnelling) has been constructed in many countries for reducing the construction time and lowing construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of permanent shotcrcte linings, high performance shotcrete providing high strength, high durability, better pumpability has to be developed in advance as an integral component. This paper presents the Ideas and first experimental attempts to increase early strength and bond strength of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) in sump water condition. In order to increase early strength, a new approach using high-early strength cement with liquid alkali-free accelerator has been investigated From the results, wet-mix SFRS with high-early strength cement and alkali-free accelerator exhibited excellent early strength improvement compared to the ordinary portland content and good bond strength even under sump water condition.

• Advances in concrete construction
• /
• 제6권4호
• /
• pp.407-422
• /
• 2018

The study evaluates properties of brick having coal ash and explores the possibility of utilization of coal bottom ash and coal fly ash as an alternative raw material in the production of coal ash bricks. Lower cement content was used in the investigations to attain appropriate strength and prohibit high carbon content that is cause of environmental pollution. The samples use up to 7% of cement whereas sand was replaced with bottom ash. Bricks were tested for compressive strength, modulus of rupture, ultrasonic pulse velocity (UPV), water absorption and durability. The results showed mix proportions of bottom ash, fly ash and cement as 1:1:0.15 i.e., M-15 achieved optimum values. The coal ash bricks were well bonded with mortar and could be feasible alternative to conventional bricks thus can contribute towards sustainable development.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.726-731
• /
• 2004

This paper suggests a material mixing method to mix several materials in a structure. This method is based on ESO(Evolutionary Structural Optimization), which has been used to optimize topology of only one material structure. In this study, two criterions for material transformation and element removal are implemented for mixing several materials in a structure. Optimal topology for a multiple material structure can be obtained through repetitive application of the two criterions at each iteration. Two practical design examples of a short cantilever are presented to illustrate validity of the suggested material mixing method. It is found that the suggested method works very well and a multiple material structure has more stiffness than one material structure has under the same mass.

• 한국지열·수열에너지학회논문집
• /
• 제7권1호
• /
• pp.10-16
• /
• 2011

Performance of ground-source heat pumps (GSHPs) is mainly affected by ground heat exchangers which makes up more than 40% of construction cost. Exact construction and grout as backfill are important, because it is difficult to repair after being installed. As grout materials, bentonite grout material and cement material are used In this paper, thermal conductivity according to mix proportion of cement grout has been experimentally studied. Some variables were set to evaluate thermal conductivities according to change in cement content, unit water ratio, mass per volume of fresh mortar, and aggregate types. From the experimental analysis, high performance cement grout has been proposed.

• Computers and Concrete
• /
• 제6권6호
• /
• pp.491-503
• /
• 2009

This paper presents a design framework developed using axiomatic design (AD) theory that can be applied in the design process of porous concrete. The main contribution of this paper is the definition of an AD framework based on the needs and functional requirements of porous concrete. The framework shows how AD theory can be used to provide guidelines for proportioning and manufacturing porous concrete. The advantage of the AD approach is that it systemizes the way to decouple design parameters and makes designers to think rationally between what we want to achieve and how we propose to satisfy the functional requirements of porous concrete. In this paper, test results of laboratory-size porous concrete specimens under compression were analyzed to evaluate the performance of the porous concrete based on the desired functional requirements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.25-28
• /
• 2006

This study investigated pre-mixed cement combined with ordinary portland cement, BF and SF, in order to manufacture cement binder, which is possible to produce 150MPa ultra high strength concrete. The BF used in this study reduces and control hydration heat. It can also improve concrete fluidity, while AP increases hydration product and accelerates reaction of BF. SF has micro filler effect and makes pozzolanic reaction. It also fabricates high density internal organization. This developed pre-mixed cement can reduce hydration heat and increase hydration product. It is possible to fabricate high density organization and to secure homogeneity. The mock-up test of ultra high strength concrete showed excellent dispersibility and workability and indicated compressive strength more than 150MPa at 28 days.