• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.76-86
• /
• 1998

Effects of processing variables and MAPP (maleic anhydride polypropylene) coupling agent on the properties of composite were discussed for turbulent-air-mixed woodfiber-polypropylenefiber composites. In this research, density, composition ratio, and mat moisture content were established as processing variables, and emulsified MAPP prepared by direct pressure method was incorporated as the coupling agent. And the turbulent air mixer, which was improved in function through alteration of our previous fiber mixer, was used to mix wood fibers and polypropylene fibers. At the addition level of 1% MAPP, based on oven-dried wood fiber weight, woodfiber-polypropylenefiber composites generally showed enhanced the physical and mechanical properties. And composites with low to medium densities of 0.6 to 0.8g/$cm^3$ greatly increased in these property values than with high densities of 1.0g/$cm^3$ or more by adding 1 % MAPP. Thus, MAPP addition was thought to be an effective way of enhancing properties for nonwoven web composites. At the mat moisture contents of 5 to 20%, however, the physical and mechanical properties were not enhanced by adding 1% MAPP. In the composites containing 15% polypropylene fibers, the lowest thickness swelling and water absorption values were observed at the 1% MAPP level. The addition of more than 1% MAPP had the adverse effect on the physical and mechanical properties of composites.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.408-408
• /
• 2012

It is well known that magnetic random access memory (MRAM) is nonvolatile memory devices using ferromagnetic materials. MRAM has the merits such as fast access time, unlimited read/write endurance and nonvolatility. Although DRAM has many advantages containing high storage density, fast access time and low power consumption, it becomes volatile when the power is turned off. Owing to the attractive advantages of MRAM, MRAM is being spotlighted as an alternative device in the future. MRAM consists of magnetic tunnel junction (MTJ) stack and complementary metal- oxide semiconductor (CMOS). MTJ stacks are composed of various magnetic materials. FePt thin films are used as a pinned layer of MTJ stack. Up to date, an inductively coupled plasma reactive ion etching (ICPRIE) method of MTJ stacks showed better results in terms of etch rate and etch profile than any other methods such as ion milling, chemical assisted ion etching (CAIE), reactive ion etching (RIE). In order to improve etch profiles without redepositon, a better etching process of MTJ stack needs to be developed by using different etch gases and etch parameters. In this research, influences of $O_2$ gas on the etching characteristics of FePt thin films were investigated. FePt thin films were etched using ICPRIE in $CH_4/O_2/Ar$ gas mix. The etch rate and the etch selectivity were investigated in various $O_2$ concentrations. The etch profiles were studied in varying etch parameters such as coil rf power, dc-bias voltage, and gas pressure. TiN was employed as a hard mask. For observation etch profiles, field emission scanning electron microscopy (FESEM) was used.

• Applied Biological Chemistry
• /
• v.6
• /
• pp.8-13
• /
• 1965

Korean MEJUES were prepared by means of ordinary, Improved and compromised methods, and analyses of the changes in various chemical compositions of the Soy-sauces throughout the fermentation period of 10 weeks. Now, their result, are as the following as. (1) In all of the Soy-sauces under study the content of organic acids showed a slight increase upto 4 week, and a marked increased after this period. (2) In all of the soy-sauces the total nitrogenous content indicated a rapid increase until 4 weeks, and a slower increase after this. (3) In all of the soy-souses, the content of free amino acids displayed a liner proportional increament until 8 weeks and then slower increose. (4) In all of the soy-souses the content of reducing sugars indicated a slight increase until 4 weeks, and after this it showed a rapid decrease until 4 weeks, in the improved soy-souses and, then maintained an almost flat curve. In the ordinary and Compromised soy-souses there was a rapid decrease in reducing sugars until 6 weeks, and then an almost 리at curves. (5) In the ordinary soy-sauce the SAMWOL-ZANG-BUB(soy-sauce prepared in March) is considered to be based on a comparatively scientific ground during the fermentative period. (6) In order to improve the taste in ordinary soy-sauce it is favorable to delay the period of preparation. The adequate period appears requires 8 weeks at least. Accordingly it is recommended to mix the materials with carbohydrate source. (7) In the improved soy-sauce according to the SAMWOL-ZANG-BUB of ordinary soy-sauce it is thought that 8 weeks were adequate for the fermentation. (8) The compromised method may be recommended for the improvement of nomemade soy-souce, and it may be also superior to the ordinary soy-sauce in quality.

• Mass Spectrometry Letters
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

China's rapid economic growth has resulted in significant environmental side effects. Therefore, China has been interested in reducing her dependence on foreign oil and gas by developing technologies needed for hydrogen, in addition to her increasing energy mix of nuclear and renewable energy form, such as solar and wind power. There are three isotopes of hydrogen, i.e. protium (P or H), deuterium (D), and tritium (T). Both deuterium and tritium are important materials in nuclear fuel cycle industry. Tritium is one of the critical radioactive nuclides. Planning for and implementing contamination control as a part of normal operation and maintenance activities is an important function in any hydrogen facility, especially tritium facility. The development of hydrogen isotopes analysis is the key issues in this area. Mass spectrometry (MS) with medium (about 600) and high resolution (> 1,400) is commercially available; however, the routine analysis of hydrogen isotopes is done with low-resolution MS (< 200) in China. This paper summarizes the progress of MS measurement technology for hydrogen isotope abundance in China, focusing on our lab's research program and technical status. An analyzing method has been introduced for accurate measurement of tritium abundance in the H.D.T system by low resolution MAT-253 MS. The quotient of compression ratio coefficient is determined by building up equipment for laboratory-scale preparation of secondary standard gases and by considering the difference in sensitivity between hydrogen isotopes. The results show that the measured value is reproducible within the relative error range of 0.8% for gas samples of different tritium abundance.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.284-290
• /
• 2009

As the increased importance is placed on the new transit systems owing to the environmental pollution caused by the road traffic congestion, the policy for the introduction of the new transit systems as an alternative solution to ease the heavy burden of the construction expenses is being actively established. Since the explicit recognition of such transit systems and the review on the method of its adoption have been a pressing matter in the light of reducing the pending traffic congestion, the development of the rolling stock systems in modes of new transportation has been made in various ways taking into consideration the regional circumstances to alleviate traffic congestion, and offer a more efficient service with the application of their intrinsic characteristics. Such systems also have been developed as a mix of punctuality for railway systems operating on the runway and flexibility for buses. This paper, therefore, deals in more detail with 3 modes of systems such as low-floor articulated buses, GRT(Guided Rapid Transit) and tram cars, and studies the overseas cases of the operation of those systems involving both negative and positive aspects.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.548-555
• /
• 2015

This paper aims to estimate the service life of the target bridge structures subjected to chloride ingress from de-icer, which is used for safety of vehicles in winter, by investigating the chloride ingress into concrete. In this study, the 10-year-old bridge structures were investigated by measuring the chloride along the depth from the exposed surface to derive the surface chloride concentration and the diffusion coefficient for the prediction of service life. The service life of each measured point on the structures were estimated with the surface chloride concentration and the diffusion coefficient by using Life-365 software. As a result, it was estimated for all measured points to have over 100-year service life. Furthermore, the diffusion coefficient and the service life from the measured data were compared to another method calculated with the concrete mix, considering the time dependency of diffusion coefficient.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.49-59
• /
• 2011

The damaged ceramics were repaired and restored thru various methods with various materials. The history of Ceramic repair and restoration has developed widening its areas from traditional stage utilizing applicable living material to the specified field that introduces new materials, new process methods and material analysis. Through investigations over the documents, artifacts and analysis, the period could be divided into natural material period in which uses the bonds extracted from the animals, plants and lime (prehistoric to Japanese domination period), Semi-artificial period in which mix natural material and synthetic resins such as "Jusabi"(Japanese domination period to 1970s.) and complete synthetic resin period in which introduces new materials and process methods in accordance with preservation standard (after 1980s).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.4
• /
• pp.354-362
• /
• 1991

To investigate nutritional and biochemical values of buckwheat, amino acids and minerals in buckwheat harvested from Kangweon-do were analysed. Mixed flour between buckwheat and wheat were made to be used for buckwheat noodle and were also analysed minerals and major nutrients in composite flours. When three different levels of flour mix were compared, major nutrients were about same among those mixes but minerals were higher by adding more buckwheat flour, especially by adding more imported buckwheat flour. From this mixed flour, 9 minerals and 16 amino acids including 9 essential amino acids were analysed. Contents of selenium, sodium and magnessium were very high in buckwheat flour, Therefore, nutritional value of domestic buckwheat was highly evaluated. BAP method was used to determine the change of gelatinization in the noodles prepared by extruder at 8$0^{\circ}C$, and in the noodles during freeze drying and refrigeration. 70% of gelatinization was done during noolding process and retrogradation was severe during refrigeration.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.493-498
• /
• 2004

The objective of the present study is to compare various conventional and recently evolved satellite image-processing techniques and to ascertain the best possible technique that can identify and position of aquaculture farms accurately in and around the Younggwang coastal area. Several conventional techniques performed to extract such information fiom the Landsat-TM imagery do not seem to yield better information about the aquaculture farms, and lead to misclassification. The large errors between the actual and extracted aquaculture farm information are due to existence of spectral confusion and inadequate spatial resolution of the sensor. This leads to possible occurrence of mixture pixels or 'mixels' of the source of errors in the classification techniques. Understanding the confusing and mixture pixel problems requires the development of efficient methods that can enable more reliable extraction of aquaculture farm information. Thus, the more recently evolved methods such as the step-by-step partial spectral end-member extraction and linear spectral unmixing methods are introduced. The farmer one assumes that an end-member, which is often referred to as 'spectrally pure signature' of a target feature, does not appear to be a spectrally pure form, but always mix with the other features at certain proportions. The assumption of the linear spectral unmxing is that the measured reflectance of a pixel is the linear sum of the reflectance of the mixture components that make up that pixel. The classification accuracy of the step-by-step partial end-member extraction improved significantly compared to that obtained from the traditional supervised classifiers. However, this method did not distinguish the aquaculture ponds and non-aquaculture ponds within the region of the aquaculture farming areas. In contrast, the linear spectral unmixing model produced a set of fraction images for the aquaculture, water and soil. Of these, the aquaculture fraction yields good estimates about the proportion of the aquaculture farm in each pixel. The acquired proportion was compared with the values of NDVI and both are positively correlated (R$^2$ =0.91), indicating the reliability of the sub-pixel classification.ixel classification.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.65-71
• /
• 2005

Recently, difficulties in soft ground improvement that caused by effectiveness of the ground improvement, the durability and environmentally friendliness of the injection material come to the fore. This paper studies the field applicability of the SCM in reinforcement and seepage cutoff of the back of an existing continuous wall. SCM uses double rod which imposes heavy pressure($10-100kgf/cm^2$) to disturbed, cut, discharge, and mix the ground. It is observed that a bulb is formed by using cement paste and environmentally friendly injection materials with minimal alkali leaching. Unconfined compression test and fish poison tests are performed. Test results indicate that the method results in higher durability, less leaching through use of the environmentally friendly injection material, and faster mobilization of the strength. In addition, field tests confirm the formation of the bulb and the seepage cutoff wall.