• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.134-140
• /
• 2008

In this paper an Investigation into the actual condition of electrical equipments installation & management and check the problem of application to IEC60364 in korea construction by the electrical installation technical regulation. building equipments by the electrical installation technical regulation are almost same TT system but the electrical installation technical regulation does not contact with protective conductor(PE conductor). This study derive a problem and resent the solving method of problem causing does not fully understand of IEC60364, mix electrical installation technical regulation and IEC60364 by the actual condition of electrical equipments installation & management in korea.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1958-1960
• /
• 2003

Here we describe a unique self-oscillating mixer (SOM) design using a modified defected ground structure (DGS) for down-converter. Proposed SOM is consisted of self-oscillator, which can produce negative resistance and select resonance frequency, and input/output matching filter. As the advantage of this SOM can be reused by module that mix signals with transistor that is used to oscillator, it is simply and low-costly designed Also, there is easy advantage to be applied in RFIC/ MMIC technology because it offers excellent high Q value in spite of using micro-strip structure. Designed self-oscillating frequency is 1.04GHz and RF frequency established is 0.8GHz. It was achieved 20dB conversion loss and phase noise of -95dBc/Hz at 100KHz offset frequency over intermediate frequency (IF). The equivalent circuit parameters for DGS are extracted by using a three dimensional EM simulator and simple circuit analysis method.

• Quality Improvement in Health Care
• /
• v.5 no.1
• /
• pp.92-104
• /
• 1998

Background : Hospitals in Korea are in trouble at ecomomic matters because of low cost of medical insurance, and consumers' demand for high quality. The management of inpatient clothing is very difficult. Especially the management of patient's clothing size is very difficult because the case mix of patients in wards is very different from the stocked clothing size. Because of the economic matters, the ward does not prepare enough size of clothing. The nurses in ward are in trouble with managing the clothing. So the nurses want free size patient clothing for ease management of clothing size. Method : The experimental inpatinets clothing is designed for in 170cm height refer to Korean standard. The fit of 8 subjects from 150 cm to 185 cm wearing experimental were evaluated by clothing specialists, nurses and patients. Result : 75.8% of evaluators like free size clothing. This results show that the fit of subjects from 160cm to 180cm was good in general but subjects with 150cm, 155cm, 185cm height showed poor fit.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.1
• /
• pp.149-158
• /
• 2002

The carbonation process is affected by both the concrete material properties such as W/C ratio, types of cement and aggregates, admixture characteristics and the environmental factors such as $CO_2$ concentration, temperature, humidity. Based on results of preliminary study on carbonation, this study is to develop a carbonation prediction model by taking account of $CO_2$ concentration, temperature, humidity ad W/C ratio among major factor affecting the carbonation process. And to constitute a model formula which correspond to the mix design of the nuclear power plant, test coefficient that correspond to the design of the nuclear power plant is obtained based on the results of accelerated carbonation test. Also a field coefficient which is obtained based on results of the field examination is included to improve the conformity of the actual structures of nuclear power plant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.263-266
• /
• 2004

The stochiometric mix of evaporating materials for the $ZnGa_2Se_4$ single crystal thin films were prepared from horizental furnace. The polycrystal structure obtaind from the power x-ray diffraction was defect chalcopyrite. The lattice costants $a_0\;and\;c_0\;were\;a_0=5.51\;A,\;c_0=10.98\;A$. To obtains the single crystal thin films, $ZnGa_2Se_4$ mixed crystal were deposited on throughly etched Si(100) by the Hot Wall Epitaxy (HWE) system. The temperates of the source and the substrate were $590^{\circ}C\;and\;450^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der Pauw and studied on carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to dark current(pc/dc), maximum allowable rower dissipation(MAPD), spectral response and response time.

• Structural Engineering and Mechanics
• /
• v.40 no.2
• /
• pp.149-165
• /
• 2011

In this paper, the effects of both pozzolans and (steel and poly-propylene) fibers on the mechanical properties of roller compacted concrete are studied. Specimens for the experiments were made using a soil-based approach; thus, the Kango's vibration hammer was used for compaction. The tests in the first stage were carried out to determine the optimal moisture requirements for mix designs using cubic $150{\times}150{\times}150$ mm specimens. In the tests of the second stage, the mechanical behaviors of the main specimens made using the optimal moisture obtained in the previous stage were evaluated using 28, 90, and 210 day cubic specimens. The mechanical properties of RCC pavements were evaluated using a soil-based compaction method and the optimum moisture content obtained from the pertaining experiments, and by adding different percentages of Iranian pozzolans as well as different amounts of steel fibers, each one accompanied by 0.1% of poly-propylene fibers. Using pozzolans, maximum increase in compressive strength was observed to occur between 28 and 90 days of age, rupture modulus was found to decrease, but toughness indices did not change considerably. The influence of steel fibers on compressive strength was often more significant than that of PP fibers, but neither steel nor PP fibers did contribute to increase in the rupture modulus independently. Also, the toughness indices increased when steel fibers were used.

• Tribology and Lubricants
• /
• v.37 no.2
• /
• pp.41-47
• /
• 2021

An experimental device was developed for analysis of hydraulic oil characteristics with dielectric constant sensors. Online analysis is the most effective method of the three methods used for analyzing lubricant oils. This is because it can monitor the machine condition effectively using oil sensors in real time without requiring excellent analysis skill and eliminates human errors. Determining the oil quality usually requires complex laboratory equipment for measuring factors such as density, viscosity, base number, acid number, water content, additive, and wear debris. However, the electric constant is another indicator of oil quality that can be measured on-site. The electric constant is the ratio of the capacitance of a capacitor using that material as a dielectric, compared with a similar capacitor that has a vacuum as its dielectric. The electric constant affects the factors such as the base oil, additive, temperature, electric field frequency, water content, and contaminants. In this study, the tendency of the electric constant is investigated with a variation of temperature, water content, and dust weight. The experimental device can control working temperature and mix the contaminants with oil. A machine condition monitoring program developed to analyze hydraulic oil is described. This program provides graph and digital values with variation of time. Moreover, it includes an alarm system for when the oil condition is bad.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.9
• /
• pp.135-142
• /
• 2019

Given the ability and skills required by modern people, marketing can be divided into knowledge-related skill such as marketing plans, market segmentation, and marketing mix management and supportive skill such as communication, inter-organizational management, creativity, and decision making. Knowledge related skills can be nurtured in existing marketing classes, but it is recognized that special educational programs such as self marketing are needed to develop and train supportive skills regardless of education levels or major education. This paper is aimed to design for marketing educational program for the self marketing. In this study, a DACUM method job analysis to extract contents by specialists such as model setting of task and job, job statement, job analysis, education course development, and so on. In the first place, this report presents job analysis model by procedures for developing selection criteria of examination questions of the self marketing qualification. The first step is preparation for job analysis, the second step: the establishment of job models, the third step : the job specification and task analysis, the fourth step: the review of job model, the fifth step: the establishment of subjects for examination matrix table for making questions.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.1
• /
• pp.57-68
• /
• 2019

The emission trading system implemented in Korea is a system in which the government allocates or sells emission rights by setting the emission allowable amount to economic players subject to the emission trading system, allowing companies to freely trade shortfall or extra money through the emission trading market. Korea also had implemented its first emission trading system scheme period of time from 2015 to 2017. As a result of the first planning period in which total of seven Korean airlines were targeted, the emission amount was about 5.51 million KAU, while the quota amount was only about 4.85 million KAU, about 116% of the actual quota was emitted and Domestic airlines have incurred additional costs of about 10.7 billion won. Due to ICAO's implementation of CORSIA, the airlines are expected to have to shoulder additional costs because purchasing exceed quota will be increased in order to offset excess emissions not only on domestic but also on international routes. Thus, this paper had analyzed the characteristics of the carbon trading system of air transport industry and suggested a mix of regulatory policies as an improvement method.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.399-407
• /
• 2019

This research is carried out to analyze the effects of Styrene and PVP on the properties of silicone hydrogel lenses. Styrene group and PVP(Polyvinylpyrrolidone) are used as additives for a basic combination containing silicone monomer, TSMA(trimethylsilyl methacrylate) and DMA(n,n-dimethylacrylamide) added to the mix at ratios of 1~10 %. Silicone hydrogel lens is produced by cast-mold method. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before its optical and physical characteristics are measured. Measurement of the physical characteristics of the produced material shows that the refractive index is 1.3682~1.4321, water content 77.11~45.73 %, visible light transmittance 95.14~88.20 %, and tensile strength 0.0652~0.3113 kgf. The results show a decrease of refractive index as the ratio of additives and water content decreases. The result of the stabilization test of polymerization show an increase of extractables along with increase of the ratio of additives, but the difference is not significant for all samples, so it can be judged that the stabilization of the polymer is maintained. Therefore, the additions of styrene and PVP should be taken into consideration for their effects on the physical properties of silicone hydrogel lens.