• Nutrition Research and Practice
• /
• v.5 no.4
• /
• pp.357-364
• /
• 2011

Selenium is an antioxidant trace element linked to cardiovascular disease and cancer. Although diet is a major source, relatively little else is known about independent determinants of selenium levels in free-living humans. In this study, we aimed to investigate the independent demographic. lifestyle, and dietary determinants of selenium levels in 1,997 men and 1,905 women in two large prospective U.S. cohorts. Toenail selenium levels were quantified using neutron activation analysis. Diet, geographic residence, demographic, and environmental factors were assessed by validated self-administered questionnaires. Multivariate generalized linear models were conducted to assess the independent relations of these factors with toenail selenium levels, correcting for measurement error in the diet. In multi variable-adjusted analyses, independent predictors of higher selenium were male gender (6.3% higher levels); living in West and Northern-Midwest U.S. regions (8.9% and 7.4% higher than Southern-Midwest regions, respectively); consumption of beef and bread products (between 0.7 - 2.5% higher per daily serving); and selenium supplement use (6.9% higher than non-users); whereas cigarette smoking (5-10% lower than never smokers), older age (0.6% lower per 5 years), and consumption of eggs, white rice, dairy products, coffee, and alcohol (between 0.1 to 2.0% lower per daily serving) were associated with lower selenium. Multiple dietary and non-dietary factors independently predicted selenium levels, suggesting that both consumption and non-dietary processes (e.g.. related to oxidant status) may affect levels. Significant geographic variation in selenium levels exists in the US.

• Research in Community and Public Health Nursing
• /
• v.9 no.2
• /
• pp.385-395
• /
• 1998

This study was conducted to investigate the relationship between self efficacy and a health locus of control. We conveniently sampled 204 university students who smoke. We invastigated by using questionaries and collected data that were analyzed using a t - test, an analysis of variance, a Pearson product-moment correlation. The results are as follows: 1. The average score of self efficacy was 66.16 (out of a total score of 100.00) in university students who smoke. In relation to the health locus of control, the internality score was highest at 25.22, the influence of others was 20.39, and the effect of chance was 15.86. 2. In a significant test of the general character other and aspect related to the smoking of the subjects and in the score of the health locus of control, the internality score of subjects who had been never been asked to quit smoking was higher than that of subjects who had been. There are significant differences in the scores concerning the influence of powerful others, especially religion. In chance occurrences, the score of subjects in medical school was higher than in other schools. The lower the age one beginns smoking, the higher the score of chance. 3. In a significant test of the general character and other aspects related to smoking and the score of self efficacy, there was no significant relationship. 4. Considering the relation of self efficacy to a health locus of control, a positive relationship between self efficacy and internality, and the influence of others, but not between self efficacy and the effect of chance. With these results, we can conclude that the higher the level of self efficacy, the higher the internality, the higher the influence of powerful others. Consequently, it is necessary to identify the relationships clearly among self efficacy the health locus of control by repeated research. It can be used to support, revise and develop health behavior theory.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.3
• /
• pp.219-236
• /
• 2009

Particle-phase organic tracers (molecular markers) have been shown to be an effective method to assess and quantify the impact of sources of carbonaceous aerosols. These molecular markers have been used in chemical mass balance (CMB) models to apportion primary sources of organic aerosols in regions where the major organic aerosol source categories have been identified. As in the case of all CMB models, all important sources of the tracer compounds must be included in a Molecular Marker CMB (MM-CMB) model or the MMCMB model can be subject to biases. To this end, the application of the MM-CMB models to locations where reasonably accurate emissions inventory of organic aerosols are not available, should be performed with extreme caution. Of great concern is the potential presence of industrial point sources that emit carbonaceous aerosols and have not been well characterized or inventoried. The current study demonstrates that emissions from industrial point sources in the St. Louis, Missouri area can greatly bias molecular marker CMB models if their emissions are not correctly addressed. At a sampling site in the greater St. Louis Area, carbonaceous aerosols from industrial point sources were found to be important source of carbonaceous aerosols during specific time periods in addition to common urban sources (i.e. mobile sources, wood burning, and road dust). Since source profiles for these industrial sources have not been properly characterized, method to identify time periods when point sources are impacting a sampling site, needs to avoid obtaining biases source apportionment results. The use of real time air pollution measurements, along with molecular marker measurements, as a screening tool to identify when point sources are impacting a receptor site is presented.

• Journal of Korean Library and Information Science Society
• /
• v.49 no.3
• /
• pp.331-359
• /
• 2018

The purpose of this study is to analyse the Big6 model and the Big6 modification model to find out the characteristics of the Big6 model and to derive implications for applying the Big6 model in the field. For this purpose, the information literacy standards of the AASL and the ACRL were compared with the Big6 model. The Big6 model, influenced by Bloom's taxonomy was analyzed alongside the Big6+3 model, the Big8 model and the modified Big6 model, provided by LG Science Land. As a result, the Big6 model could be used as an information problem-solving model, metacognitive activation strategy, and scaffolding to improve students' information literacy. In addition, it could be used as a model for constructivism, inquiry-based learning, the integration of curriculum, collaborative education, and ICT technology. How teacher-librarians or librarians apply the Big6 model is related to the improvement of critical thinking skills. Teacher-librarians and librarians need to plan situations, subjects, topics, and methods in a systematic and specific way when applying the Big6 model to the information literacy curriculum.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1399-1406
• /
• 2000

A continuous culture study was conducted to determine the impact of ruminal degradable soy protein (S-RDP) level and dilution rate (D) on growth of ruminal non-structural carbohydrate-fermenting microbes. Corn starch, urea and isolated soy protein (ISP) were used to formulate three diets with S-RDP levels of 0, 35 and 70% of total dietary CP. Two Ds were 0.03 and $0.06h^{-1}$ of the fermenter volume in a single-effluent continuous culture system. As S-RDP levels increased, digestibilities of dietary dry matter (DM), organic matter (OM) and crude protein (CP) linearly (p=0.001) decreased, whereas digestion of dietary starch linearly (p=0.001) increased. Increasing D from 0.03 to $0.06h^{-1}$ resulted in decreased digestibilities of dietary DM and OM, but had no effect on digestibilities of dietary starch (p=0.77) and CP (p=0.103). Fermenter pH, the concentration of volatile fatty acids (VFA) and daily VFA production were unaffected (p=0.159-0.517) by S-RDP levels. Molar percentages of acetate, propionate and butyrate were greatly affected by S-RDP levels (p=0.016-0.091), but unaffected by D (p=0.331-0.442). With increasing S-RDP levels and D, daily bacterial counts, daily microbial N production (DMNP) and microbial efficiency (MOEFF; grams of microbial N produced per kilogram of OM truly digested) were enhanced (p=0.001). The increased microbial efficiency with increasing S-RDP levels is probably the result of peptides or amino acids that served as a stimulus for optimal protein synthesis. The quantity of ruminal degradable protein from soy proteins required for optimum protein synthesis of non-structural carbohydrate-fermenting microbes appears to be equivalent to 9.5% of dietary fermented OM.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.390-393
• /
• 2005

N-nitrosodimethylamine (NDMA), a potent carcinogenic, has recently been observed at drinking water supply systems in USA and Canada. The NDMA formation was studied as a function of chloramine concentration (0.001-0.1 mM) at a fixed dimethylamine (DMA) concentration of 0.05 mM at different initial pH (6, 7, 8). It was found that the NDMA formation rate varied with pH values. The formation of NDMA increased with increasing chloramine concentration and showed maximum yields of 2.4% and 1.6% at pH 7 and 8, respectively. A good correlation ($r^2>0.99$) was observed between the molar ratio (chloramine/DMA) and NDMA formation at pH 7 and 8. Linearity of the NDMA formation appeared to be related to chloramine concentrations.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.166-174
• /
• 2008

As the use of virtual environment for decision-making interior or architectural design has been increasingly broaden, the choice of media form-physical, objective properties of a display medium-became and important issue to take into consideration. This research deals with the effects and differences between two types of media for a virtual environment; wall projection screen(120") and PC monitor(17"). In addition, efficient adoption of the two media forms was also proposed in this research. A total of 90 subjects participated in pre-designed three experimental groups(A group: experiment with a wall projection screen, B group: experiment with PC monitor, C group: both) and answer the seating preferences, the presence inventory, and the decision confidence using a simulated virtual restaurant environment. The results are as follows: (1) seating preferences for the tables located in frequent traffic area and near other spaces such as restroom and th kitchen are significantly different by the media form. While there is no significant difference found in seating preferences for most tables except high traffic areas near entrances between the two media. This result demonstrates the effects of media type or screen size on user perception for the areas near structural or interior design elements. (2) The presence measure in this research consist of in this research consist of four factors: 'spatial presence,' 'object presence,' 'positive effects,' and 'the factor of negative effects. 'The mean values of the items involving engagement or interaction in the spatial presence factor and the object presence factor are significantly different by the media form. A higher sense of presence of presence was observed in the wall projection screen. (3) PC monitor condition was shown to provide a higher level of decision confidence. Based on the research finding, conclusions and implications are discussed.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.287-295
• /
• 2012

Purpose: Some of the most representative approaches are to apply next generation technologies to save energy consumption, fully automated control system to appropriately maintain environmental conditions, and autonomous assistance system to reduce labor load and ensure operator's safety. Nevertheless, improvement of upcoming method for soil cultured greenhouse has not been sufficiently achieved. Geometrical complexity of ground in protected crop cultivation might be one of the most dominant factors in design of autonomous vehicle. While there is a practical solution fairly enough to promise an accurate travelling, such as autonomous sprayer guided by rail or induction coil, for various reasons including the limitation of producer's budget, the previously developed sprayer has not been widely distributed to market. Methods: In this study, we developed an autonomous sprayer considering travelling performance on geometrical complexity of ground in soil cultured greenhouse. To maintain a stable travelling and to acquire a real time feedback, common wire with 80 mm thick and body frame and sprayer boom. To evaluate performance of the prototype, tracking performance, climbing performance and spraying boom's uniform leveling performance were individually evaluated by corresponding experimental tests. Results: The autonomous guidance system was proved to be sufficiently suitable for accurate linear traveling with RMS as lower than approximately 10 cm from designated path. Also the prototype could climb $10^{\circ}$ of ground's slope angle with 40 kg of water weight. Uniform leveling of spraying boom was successfully performed within $0.5^{\circ}$ of sprayer boom's slope. Conclusions: Considering more complex pathways and coarse ground conditions, evaluations and improvements of the prototype should be performed for promising reliability to commercialization.

• Journal of Engineering Education Research
• /
• v.6 no.1
• /
• pp.15-21
• /
• 2003

This paper reports the results of course restructuring employing design projects in an introductory mechanics of materials course at Pennsylvania State University. Unlike traditional lecture courses, students were encouraged to learn the rudiments of mechanical design and how materials standards, economics, manufacturing, environmental, legal (liability) and societal (safety) concerns relate to design. Through conducting collaborative design projects, the instructors helped students to acquire more advanced skills such as team-based decision making, integration and establishment of criteria, use of modern design theory, consideration of alternative solutions, and application of realistic constraints. In order to examine the impact of new course changes on students' learning, a survey was conducted in 1998 Fall semester. According to the results of survey analyses, students reported high values on this introductory mechanics of materials course. However, they did not give high values on the design projects. Rather, they preferred lecture sessions. Additionally, it was also found that students who earned higher grades from a prerequisite course(statics) showed lower values on the design projects. Implications for engineering educators and suggestions for future research studies were discussed.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.27-37
• /
• 2011

Uplift phenomenon occurs when the apparent unit weight of buried geo-structures becomes smaller than that of the liquefied backfill due to the increase of an excess pore water pressure during strong earthquakes. In order to explain the relationship between the uplift displacement of the buried geo-structures and the increase of the excess pore water pressure ratio in backfill, dynamic centrifuge model tests are conducted. In the present study, primary and secondary factors against uplift behavior of the buried geo-structures are considered in the dynamic centrifuge model tests. Among these factors, the most important factors affecting the increase in the excess pore water pressure ratio were the ground water depth, the relative density of backfill, and the amplitude of the input acceleration, which were also largely affect the uplift amount of the buried geo-structures.