• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.39-47
• /
• 2009

The purpose of this study is to find out the changes on the metropolitan condominium apartment unit plans based on the interior spaces related to women such An-bang (master bedroom), bathroom and attached spaces to the master bedroom, living room, diningroom, kitchen, utility room, and balcony. This study used the content analysis method and space syntax. Contents were limited to the floor plans with 3 rooms type and about 105 m2 in the Korean apartment encyclopedia. The unit plans of 2,278, built from October 1975 to January 2008, were analyzed and basically SPSS package 16.0 was employed. The results were as followed. 1) Living room was a core space and an increasing tendency. After 2001, the design trend of living room connected with kitchen and dining room, and dining room changed into one space combining with women's working space such kitchen. It meaned women's working activities became into family public activities as to depending open access. 2) Kitchen had a characteristics that was connected to utility room or back balcony, and the number of extra kitchen increased. Also, the size of DK decreased, but utility size little increased. It was showed the characteristic of this space was still for women. 3) An-bang had a little strong characteristics of married coulpe or women's personal space with bathroom or dress room/powder room. 4) In addition, the values of integration and control of living room and DK were highest. It meant these space were centered in unit plans. Next, the An-bang and dress room/powder room were high. Utility room or balcony's were next, and these were women's working space. Therefore, family's public space was most important, and married couple or women's personal and working space were later in planning.

• The Plant Pathology Journal
• /
• v.30 no.3
• /
• pp.323-329
• /
• 2014

Two cultivars Buram-3-ho (susceptible) and CR-Hagwang (moderate resistant) of kimchi cabbage seedlings showed differential defense responses to anthracnose (Colletotrichum higginsianum), black spot (Alternaria brassicicola) and black rot (Xanthomonas campestris pv. campestris, Xcc) diseases in our previous study. Defense-related hormones salicylic acid (SA), jasmonic acid (JA) and ethylene led to different transcriptional regulation of pathogenesis-related (PR) gene expression in both cultivars. In this study, exogenous application of SA suppressed basal defenses to C. higginsianum in the 1st leaves of the susceptible cultivar and cultivar resistance of the 2nd leaves of the resistant cultivar. SA also enhanced susceptibility of the susceptible cultivar to A. brassicicola. By contrast, SA elevated disease resistance to Xcc in the resistant cultivar, but not in the susceptible cultivar. Methyl jasmonate (MJ) treatment did not affect the disease resistance to C. higginsianum and Xcc in either cultivar, but it compromised the disease resistance to A. brassicicola in the resistant cultivar. Treatment with 1-aminocyclopropane-1-carboxylic acid (ACC) ethylene precursor did not change resistance of the either cultivar to C. higginsianum and Xcc. Effect of ACC pretreatment on the resistance to A. brassicicola was not distinguished between susceptible and resistant cultivars, because cultivar resistance of the resistant cultivar was lost by prolonged moist dark conditions. Taken together, exogenously applied SA, JA and ethylene altered defense signaling crosstalk to three diseases of anthracnose, black spot and black rot in a cultivar-dependent manner.

• Journal of Home Health Care Nursing
• /
• v.5
• /
• pp.5-19
• /
• 1998

This study presents results of surveys conducted Seoul and Kangreung public health center using structured questionnaire developed by researchers to identify factors that were relevant to the method of feeding. To compare the infant's development between the breast-fed infants and formula-fed infants, infant's height, weight, triceps skinfold during 1month and 4months were cheked. The results were as follows : 1. At postpartum, 59.1% infants had formula feeding, while 22.6% had breast feeding. At 1 month old, 49.6% infants had formula feeding, 27.8% had breast feeding. At 4 months old, 60.9% infants had formula feeding, while 26.1% had breast feeding. 2. 'Lack of breast milk' was the predominant reason for formula feeding. 3. The sujects didn't enough eat not only rice and seaweed soup but also any other specific foods during breast feeding period. 4. Factors that affected the method of feeding were the patterns of delivery, mother's height & weight, first baby feeding type(at post partum), infant sex, mother's age, preparation of breast feeding, first baby feeding type, regular clinic visit (at 4months old). 5. The birth weight and height were correlated with mother's weight and height. 6. There were no significant different on infant's weight, height, triceps skinfold between breast-fed infants and formula-fed infants.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.100-115
• /
• 2015

The main purpose of this study is to establish fundamental data for the development of processed food using mealworm after examination of preferences and purchased intention according to two types of cooking methods (saute and oven) and three shapes (original, chapping, and powder) of cooked mealworm. In particular, this study aims to facilitate the establishment of target market strategies about edible insects bringing food neophobia. The results show that males' and older persons' preferences and purchases intention were higher than those of female and younger people. The group having high health involvement and low food neophobia had higher preferences and purchase intentions than the group having low health involvement and high food neophobia. In addition, customers had highest preferences and purchase intention with powdered mealworm regardless of cooking methods and customers' characteristics. These research findings provide food developer with meaningful data for market targeting.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.8-12
• /
• 1998

The 2,2'-Biimidazole was synthesized by the reaction between glycol and ammonium solution. The correct solid structure of 2,2'-biimidazole in this method reported either trans ($C_{2h}$) or cis ($C_{2v}$) form. In this study, the correct structure of 2,2'-biimidazole was analysed by both FTIR and Raman spectroscopy using mutual exclusion properties of them. Also, it was analysed by $^1H$ and $^{13}C$ NMR and computer molecular modeling. The structure of 2,2'-biimidazole found to be trans ($C_{2h}$) than cis ($C_{2v}$) by comparison between FTIR and Raman Spectra. This results agree with computer molecular modeling and x-ray crystallography. This study provide good evidence for identifying structural orientation of the 2,2'-biimidazole containing pyridyl nitrogen.

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.2
• /
• pp.49-72
• /
• 2018

The purpose of this study is to analyze the structure, and contents of the US national school library standards presented in the document National School Library Standards for Learner, Librarian and School Libraries made by AASL, and to provide basic information to refer to the direction and contents of Korean school library standards. AASL's National School Library Standards provide Learner Standards, School Librarian Standards, School Library Standards and Standards Integrated Frameworks that incorporate three previous standards, and emphasize the growth of learners and school librarians' competency by focusing on the educational activities of learners and school librarians. With the physical environment of the school library being somewhat established, it is necessary to establish standards for the educational content and competency of learners and teachers. And it is necessary to pay more attention to the materials including the contents of education.

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.585-594
• /
• 2019

In-situ leaching could be one of the promising mining methods to extract the minerals from deep fractured rock mass. Constrained by the low permeability at depth, however, the performance does not meet the expectation. In fact, the rock mass permeability mainly depends on the pre-existing natural fractures and therefore play a crucial role in in-situ leaching performance. More importantly, fractures have various characteristics, such as aperture, persistence, and density, which have diverse contributions to the promising method. Hence, it is necessary to study the variation of fluid rate versus fracture parameters to enhance in-situ leaching performance. Firstly, the subsurface fractures from the depth of 1500m to 2500m were mapped using the discrete fracture network (DFN) in this paper, and then the numerical model was calibrated at a particular case. On this basis, the fluid flow through fractured rock mass with various fracture characteristics was analyzed. The simulation results showed that with the increase of Fisher' K value, which determine the fracture orientation, the flow rate firstly decreased and then increased. Subsequently, as another critical factor affecting the fluid flow in natural fractures, the fracture transmissivity has a direct relationship with the flow rate. Sensitive study shows that natural fracture characteristics play a critical role in in-situ leaching performance.

• Smart Structures and Systems
• /
• v.31 no.4
• /
• pp.365-381
• /
• 2023

The existing vision-based techniques for inspection and condition assessment of civil infrastructure are mostly manual and consequently time-consuming, expensive, subjective, and risky. As a viable alternative, researchers in the past resorted to deep learning-based autonomous damage detection algorithms for expedited post-disaster reconnaissance of structures. Although a number of automatic damage detection algorithms have been proposed, the scarcity of labeled training data remains a major concern. To address this issue, this study proposed a semi-supervised learning (SSL) framework based on consistency regularization and cross-supervision. Image data from post-earthquake reconnaissance, that contains cracks, spalling, and exposed rebars are used to evaluate the proposed solution. Experiments are carried out under different data partition protocols, and it is shown that the proposed SSL method can make use of unlabeled images to enhance the segmentation performance when limited amount of ground truth labels are provided. This study also proposes DeepLab-AASPP and modified versions of U-Net++ based on channel-wise attention mechanism to better segment the components and damage areas from images of reinforced concrete buildings. The channel-wise attention mechanism can effectively improve the performance of the network by dynamically scaling the feature maps so that the networks can focus on more informative feature maps in the concatenation layer. The proposed DeepLab-AASPP achieves the best performance on component segmentation and damage state segmentation tasks with mIoU scores of 0.9850 and 0.7032, respectively. For crack, spalling, and rebar segmentation tasks, modified U-Net++ obtains the best performance with Igou scores (excluding the background pixels) of 0.5449, 0.9375, and 0.5018, respectively. The proposed architectures win the second place in IC-SHM2021 competition in all five tasks of Project 2.

• Advances in concrete construction
• /
• v.15 no.6
• /
• pp.359-376
• /
• 2023

Ultra-high-performance concrete (UHPC) has become an attractive cast-in-place repairing material for existing engineering structures. The present study aims to investigate age-dependent high-early-strength UHPC (HESUHPC) material properties (i.e., compressive strength, elastic modulus, flexural strength, and tensile strength) as well as interfacial shear properties of HESUHPC-normal strength concrete (NSC) composites cured at different season temperatures (i.e., summer, autumn, and winter). The typical temperatures were kept for at least seven days in different seasons from weather forecasting to guarantee an approximately consistent curing and testing condition (i.e., temperature and relative humidity) for specimens at different ages. The HESUHPC material properties are tested through standardized testing methods, and the interfacial bond performance is tested through a bi-surface shear testing method. The test results quantify the positive development of HESUHPC material properties at the early age, and the increasing amplitude decreases from summer to winter. Three-day mechanical properties in winter (with the lowest curing temperature) still gain more than 60% of the 28-day mechanical properties, and the impact of season temperatures becomes small at the later age. The HESUHPC shrinkage mainly occurs at the early age, and the final shrinkage value is not significant. The HESUHPC-NSC interface exhibits sound shear performance, the interface in most specimens does not fail, and most interfacial shear strengths are higher than the NSC-NSC composite. The HESUHPC-NSC composites at the shear failure do not exhibit a large relative slip and present a significant brittleness at the failure. The typical failures are characterized by thin-layer NSC debonding near the interface, and NSC pure shear failure. Two load-slip development patterns, and two types of main crack location are identified for the HESUHPC-NSC composites tested in different ages and seasons. In addition, shear capacity of the HESUHPC-NSC composite develops rapidly at the early age, and the increasing amplitude decreases as the season temperature decreases. This study will promote the HESUHPC application in practical engineering as a cast-in-place repairing material subjected to different natural environments.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.430-437
• /
• 2008

Optical diffuse reflectance sensing in visible and near-infrared wavelength ranges is one approach to rapidly quantify soil properties for site-specific management. The objectives of this study were to investigate effects of preprocessing of reflectance data and determine the accuracy of the reflectance approach for estimating physical and chemical properties of selected Missouri and Illinois, USA surface soils encompassing a wide range of soil types and textures. Diffuse reflectance spectra of air-dried, sieved samples were obtained in the laboratory. Calibrations relating spectra to soil properties determined by standard methods were developed using partial least squares (PLS) regression. The best data preprocessing, consisting of absorbance transformation and mean centering, reduced estimation errors by up to 20% compared to raw reflectance data. Good estimates ($R^2=0.83$ to 0.92) were obtained using spectral data for soil texture fractions, organic matter, and CEC. Estimates of pH, P, and K were not good ($R^2$ < 0.7), and other approaches to estimating these soil chemical properties should be investigated. Overall, the ability of diffuse reflectance spectroscopy to accurately estimate multiple soil properties across a wide range of soils makes it a good candidate technology for providing at least a portion of the data needed in site-specific management of agriculture.