• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.99-103
• /
• 2006

The laser interferometer has been used for measurement of the micro displacement error. Although the laser interferometer is widely accepted as a tool for measurement of motion accuracy, the set-up procedure is time-consuming because of the strict requirement on alignment between a laser head and optic units. This paper addresses the development of a laser interferometer to measure the micro displacement for a micro machine. The portable laser interferometer which integrates a laser probe and optics, is developed for the convenient measurement. For the experiment, moving mirror set up on the micro stage. The velocity decoding board is also added to calculate doppler shift frequency directly. The output signal is obtained and analyzed by LabView. Finally experiments are found out the relation between micro displacement and output signal.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.163-171
• /
• 2020

There are many differences in narrative delivery between common movies and Virtual Reality(VR) films due to their differences in the appreciation structure. In VR films, scene changes by cuts have hindered the immersion of the audience instead of promoting narrative delivery. There are a range of experiments on narratives and immersion to solve this issue in VR films. Floating Tent applies hand gestures and immersive effects found in game elements and does not disturb narrative delivery by setting proper spaces and employing a direction technique to enable the melting of narratives into the characteristics of the spaces. There are time limits to offsound and mission performance, and devices fit for apocalyptic spatial expressions are made through a program. One of measures for the increasingly growing interactive storytelling in VR films is effective immersion. In narrative delivery, it is important to consider spatial setting and immersion to enable active intervention into events for immersion rather than passive audience only supposed to watch characters' acting.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.88-89
• /
• 2000

광전송 시스템의 전송용량은 WDM 기술의 비약적 성장에 의해 테라 bps급으로 증대된 데 비해 LAN 또는 MAN 등을 포함한 광 다중 접속 네트워크에 대한 연구는 비교적 덜 성숙한 실정이다. 광 코드분할 다중접속 (CDMA) 네트워크는 비동기 다중 사용자 시스템에의 응용 가능성과 자체적인 보안성의 제공으로 광 다중 접속 네트워크 구성의 유망한 해결책 중 하나로 관심을 모으고 있다. 현재까지 다양한 광 CDMA 네트워크 구성 방안들이 제안되었으며 이들은 크게 시간영역 또는 주파수영역에서의 부/복호 방식, 인코히어런트 또는 코히어런트 광 신호처리 방식으로 분류되어진다$^{(1)}$ . (중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.9 s.114
• /
• pp.971-981
• /
• 2006

This paper presents the design and characterization of a novel fiber optical coupler for intensity modulated fiber optical microphone. Theoretical equations for the optical power coupling are presented in detail including optical path analysis and misalignment. Various optical couplers are simulated and manufactured. A multi-mode to multi-mode coupler is characterized by static and dynamic movements of mirror on a well designed experimental stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.25-28
• /
• 2010

The micro fabrication on the mold material using picosecond laser ablation processing has been studied. We used the two kind of system with picosecond laser. First one is two mirror type scanner and telecentric f-theta lens. Second one is X-Y stage and objective lens. By using these system, the $100{\mu}m$ size chess patterning and $2{\mu}m$ size patterning was fabricated. Especially $2{\mu}m$ size patterning on the mold material can be used as the decorative rainbow color logo for industrial field. In this paper, it is proved the picosecond laser is effective tool for the laser ablation processing.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.26-31
• /
• 2008

A precision four-degree-of-freedom measurement system has been developed for simultaneous measurement of four motion errors of a linear stage, which include straightness and angular errors, The system employs a retro-reflector to detect the straightness errors and a plane mirror to detect the angular errors. A common-path compensation method for laser beam drift is put forward, and the experimental results show that the influences of beam drift on four motion errors can be reduced simultaneously. In comparison with the API 5D laser measuring system, the accuracy for straightness measurement is about ${\pm}1.5{\mu}m$ within the measuring range of ${\pm}650{\mu}m$, and the accuracy for pitch and yaw measurements is about ${\pm}1.5$ arc-seconds within the range of ${\pm}600$ arc-seconds.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.67.2-67.2
• /
• 2013

The GMT project is in its final stage of Design Development Phase in 2013, moving toward the Construction Phase planned to begin on Jan. 1st, 2014. In this contribution, we present the current status and progress of the GMT project including selection of the first generation instruments, development of primary mirror segments, site preparation, and science case revision along with plans for 2013 when the preparation of construction phase will be made.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.224-233
• /
• 2005

Cyberspace is created through the confluence of global electronic communications networks and technology, and also meant to be a three-dimensional space of information. Its application in arts, however, requires broader views and knowledge and often results a confounded definition of it. The study is to define cyberspace and the architecture in it, with the methodology of the structural criticism, focusing the textuality without any impression or intuition to reach its valid epistemic definition. Two architects in cyberspace; Novak and Lynn, and their works have been discussed and analyzed reflecting Benedikt's theory of cyberspace which has coined its definition in architecture in early 90's. Lacan's subject theory, including the mirror stage, has played a key role to evaluate the identities and the differences of various views towards cyberspace. It also enables us to construe the on-going status and meaning of cyberspace and the architecture In it.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.124-131
• /
• 1996

The use of small hemispherical high-speed precision bearing has increased drastically these days in the field of computer disk driver, highteech devices as well as communication and electronic device drivers. It was suggested that the new polishing process adopting the diamond grinding wheel and polishing tool instead of multi stage lapping processes, which enables the mass production of the bearing by reduction of polishing time. Polishing mechanism was analysed and the results were applied to the design and manufacturing of the polishing system. Experiments for selection of optimal polishing conditions were carried out using the polishing system.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2009

In this study, we propose an image stitching method for large-area holographic photo lithography. In this method, a hologram medium become a hologram mask for lithography. And the mask has information for stitched images. These images are recorded by signal images which are controlled with DMD (digital micro-mirror device), and serial hologram recording is achieved with a motorized linear stage. Using this method, fringe seams appear on the stitching area. To remove these fringe seams, double exposure holographic lithography is tried. Each stitched image is recorded and reconstructed with a different reference beam. The experiments confirm that fringe seams are removed.