• 한국치위생학회지
• /
• 제7권3호
• /
• pp.213-230
• /
• 2007

The purpose of this study was to examine the state of infection control provided to members of Korean Dental Hygienists Association. The subjects in this study were dental hygienists who attended a symposium on July 1. 2006. after a survey was conducted, the answer sheets from 489 participants were analyzed, and the findings of the study were as follows: 1. Possession of disinfection room was being(72.7%), and person of infection control was zero(52.9%). Number of sterilizer was one(62.2%). 2. As a repetition choice, type of sterilizer was autoclave(97.9%), UV sterilizer(67.4%) and EO gas sterilizer(21.4%). As a repetition choice, infection materials was ethanol(84.1%). 3. Water tube of unit and chair was using of sterilized water(42.9%). Sterilizing of compressed air was no(69.0%). 4. Re-using of disposal was not using(62.5%), re-using disposal was suction tip(28.2%)(repetition choice) 5. In sterilization of instruments, hand-piece was every using time(28.4%), and reamer-file, bur, mirror, pincette, explorer, hand scaler and ultrasonic scaler were high in every using time. 6. Individual protection was high of using, cleaning of hands before treatment was every treatment(87.0%). Type of soap was liquid type in dental clinic(48.2%), infection soap in dental hospital(41.2%) and solid soap in public health center(50.6%). Answered that they need regular oral health education, and 82.9% respondents answered that they need oral health technicians in school. And 87.8% respondents needed individual oral health education for the benefit of better oral health.

• 한국진공학회지
• /
• 제18권3호
• /
• pp.186-196
• /
• 2009

하이퍼써멀 영역의 에너지 ($1{\sim}100\;eV$), 특히, 50 eV 이하의 에너지를 갖는 높은($10^{16}$ particles/$cm^2\;s$ 이상) 플럭스의 이온빔을 직접 인출하기는 어렵지만, 이온을 중성화한 중성입자빔 경우에는 가능하다. 높은 플럭스의 하이퍼써멀 중성입자빔을 생성하고 효율적으로 수송하기 위해서는 낮은 플라즈마 운전압력(0.3 mTorr 이하)에서도 높은 이온밀도($10^{11}\;cm^{-3}$ 이상)를 유지할 수 있는 대면적 플라즈마 발생원이 요구된다. 이러한 하이퍼써멀 중성입자빔의 생성을 위해 요구되는 플라즈마 발생원을 구현하기 위해서는 자기장에 의한 전자가둠 방식이 도입되어야 하는데, 영구자석을 이용한 다양한 자기장 구조를 갖는 Electron Cyclotron Resonance (ECR) 플라즈마 발생 방식이 하나의 해결 방법이 될 수 있음을 제안하였다. 여기에는 마그네트론 구조를 갖는 자기장을 채택한 평면형 ECR 플라즈마 발생 방식과 원통형 플라즈마 용기 외벽 둘레에 영구자석 어레이를 설치하여 축방향 자기장을 형성하고 용기 중심부에 전자를 가두는 원통형 방식이 있다. 두 경우 모두 기본적으로 mirror field 구조에 의한 전자 가둠을 기반으로 하고 전자의 drift에 의해 더욱 효율적으로 전자를 플라즈마 공간에 가두는 방식을 도입하고 있어서 낮은 운전압력에서도 높은 밀도의 플라즈마를 발생시키고 유지할 수 있다.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.858-866
• /
• 1998

Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

• Natural Product Sciences
• /
• 제8권2호
• /
• pp.44-47
• /
• 2002

The effects of Eurycoma longifolia Jack on masculine copulatory behaviour were studied in the middle aged male Sprague-Dawley rats, 9 months old and retired breeders after dosing them with 500 mg/kg twice daily for 10 days prior to test. The test lasted for 30 minutes after a 20 minute adaptation period, was carried out on the 11th day during the dark phase of the light-dark cycle (2000-0700 hours) and in subdued light, using a modified copulation cage but with the presence of a piece of mirror of appropriate size to facilitate observation. Results showed that the mean values of EL-1, EL-2 and EL-3 of the control middle aged male rats were 103.20 sec, 91.21 sec and 80.00 sec but were significantly (p<0.05) increased to 118.40-120.20 sec, 101.24-171.28 sec and 100.42-110.21 sec respectively in the methanol-chloroform, methanol-butanol-water and methanol-butanol treated middle aged male rats. However, further results also showed that PEI-1 and PEI-2 of the control middle aged male rats were 182.30 sec and 257.2 sec but were significantly (p<0.05) decreased to 100.42-121.31 sec and 40.21-132.31 sec respectively in the methanol-chloroform-butanol-water and methanol-butanol treated middle aged male rats. In conclusion, this study showed that although E. longifolia Jack continued to enhance the sexual activity of the middle aged male rats by extending the duration of coitus and decreasing the refractory period between the different series of copulation, but to a smaller degree as compared to sexually active, adult male rats (Ang and Sim, 1997).

• 한국광학회지
• /
• 제10권2호
• /
• pp.152-156
• /
• 1999

여기밀도 변화에 따른 펄스폭 연속 가변 Quenched Dye Laser(Q이)를 설계 제작하여 그 동작 특성을 분석하였다. 펌핑광원은 펄스폭 20 ns(FWHM), 에너지 150mJ의 XecCl 엑시머 레이저를 사용하였으며, 색소레이저의 활성매질은 Rhodamine 6G로서 에탄올(ethanol)용액에 2.5$\times$10-3[mol/l]의 농도로 용해되었다. 활성길이 5 nm인 색소셀에서 서로 평행한 양면을 공진기로 구성하여 색소레이저의 이완발진 출력특성을 얻었다. 이완발진의 펄스열에서 단일 펄스를 추출하기 위해 QDL를 구성하였다. QDL의 펄스폭을 가변하기 위해 초점거리 f=150 mm 접속렌즈를 이동시켜 색소셀에 조사되는 공간적 펌핑폭을 조절함으로써 여기밀도를 8.8$\times$1023[cm-3s-1]~2.8$\times$1023[cm-3s-1]까지 가변시켰다. 공간적 펌핑폭에 따른 펄스폭 가변 실험을 수행한 결과 QDL의 발진 펄스폭이 86 ps~201 ps 사이에서 연속적으로 가변됨을 알 수 있었다.

• 전자공학회논문지C
• /
• 제35C권9호
• /
• pp.64-72
• /
• 1998

본 논문에서는 상보형 high swing cascode 전류미러를 이용하여 저전압, 저전력 구동이 가능하고 고주파수 응용이 가능한 전류 적분기를 설계하였다. 간단한 전류미러로 구성된 적분기는 적분기의 비 이상적인 입력, 출력 저항 때문에 출력 전류 오차가 발생하는데 제안된 전류 적분기는 출력 저항이 증가하여 출력 전류의 오차가 감소하였다. 설계된 무손실, 유손실 전류 적분기를 이용한 설계 예로 3차 버터워스 저역통과 필터를 개구리도약형으로 구현하였다. 필터 구현시 무손실 전류 적분기의 위상 추이 때문에 발생하는 차단주파수 부근에서의 크기 특성 왜곡을 predistortion 설계법을 이용하여 감소시켰다. 설계된 전류모드 필터를 0.8㎛ CMOS n-well 공정 파라미터를 이용하여 SPICE 시뮬레이션한 결과 단일 2V 공급 전압에서 차단주파수는 20MHz, 전력소모는 615㎼를 갖는다. 또한 필터의 차단주파수는 DC 바이어스 전류에 의해 동조 할 수 있다.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.284-288
• /
• 2002

향어, Cyprinus carpio [Linnaeus]의 체장에 따른 심전도를 구명하기 위하여, 어체내에 전극을 삽입하여 3가지 체장 범위 (10~15, 15~20, 20~25cm)에서의 심전도를 주간과 야간으로 구분하여, 16~18$^{\circ}C$ 수온에서 30분간 조사한 심박수와 생체전위를 마취상태와 안정상태로 구분비교 분석한 결과는 다음과 같다. 1 체장이 10~15 cm인 경우, 마비상태 (0~9분)에서의 평균심박수는 주간에 43.4 beat/min, 야간에 45.9 beat/min였고, 평균생체전위는 주간에 4.38 $\mu\textrm{V}$, 야간에 3.64 $\mu\textrm{V}$로 나타났으며, 안정상태 (9~30분)에서의 평균심박수는 주간에 69.4 beat/min, 야간에 67.4 beat/min였고, 평균생체전위는 주간에 3.82 $\mu\textrm{V}$, 야간에 3.50 $\mu\textrm{V}$로 나타났다. 2 체장이 15~20cm인 경우, 마비상태 (0~5분)에서의 평균심박수는 주간에 42.2 beat/min, 야간에 45.4 beat/min였고, 평균생체전위는 주간에 4.13 $\mu\textrm{V}$, 야간에 3.95 $\mu\textrm{V}$로 나타났으며, 안정상태(5~30분)에서의 평균심박수는 주간에 67.6 beat/min, 야간에 65.3 beat/min였고, 평균생체전위는 주간에 4.58 $\mu\textrm{V}$, 야간에 4.61 $\mu\textrm{V}$로 나타났다. 3. 체장이 20~25 cm인 경우, 마비상태(0~4분)에서의 평균심박수는 주간에 47.5 beat/min, 야간에 47.5 beat/min였고, 평균생체전위는 주간에 4.81 $\mu\textrm{V}$, 야간에 4.20 $\mu\textrm{V}$로 나타났으며, 안정상태(4~30분)에서의 평균심박수는 주간에 67.5 beat/min, 야간에 64.8 beat/min였고, 평균생체전위는 주간에 5.31 $\mu\textrm{V}$, 야간에 4.90 $\mu\textrm{V}$로 나타났다.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.33-38
• /
• 2008

As consumer in optics, electronics, aerospace and electronics industry grow, the demand for ultra precision aspherical surface lens increases higher. Precision turning with single-diamond tools has a long history of development for fabrication of optical quality surfaces since the advent of aerostatic rotary spindles and precise linear motion guide ways. To enhance the precision and productivity of ultra precision aspherical surface micro lens, the following specification of ultra precision grinding system is required: the highest rotational speed of the grinder is 100,000rpm and its turning accuracy is $0.1{\mu}m$, positioning accuracy is $0.1{\mu}m$. The development process of the grinding system for the ultra precision aspherical surface micro lens for optoelectronics industry is introduced. In the work reported in this paper, an intelligent grinding system for ultra precision aspherical surface machining was designed by considering the factors affecting the surface roughness and profiles accuracy. An aerostatic form was adopted to build the spindle of the workpiece and the spindle of grinder and ultra precision LM guide way was adopted in this system. And this paper deals with mirror grinding of an aspheric surface micro lens by resin bonded diamond wheel and spherical lens of BK7. It results was that a form accuracy of $0.6{\mu}m$ P-V and a surface roughness of $0.006{\mu}m$ Rmax.

• 보건교육건강증진학회지
• /
• 제26권4호
• /
• pp.23-33
• /
• 2009

Objectives: This study was to examined the level of psychosocial factors, dietary habits and DMFT index and to examined the relationship among variables in 12-year-old adolescents. Methods: Participants were 1,831 total students from 14 middle school who lived Seosan with mean age of 12.46 years. Data was collected using a self administrated questionnaire from April 13 to May 24, 2009. Psychosocial factors and dietary habits were measured using the 5-items and 10-items. A trained investigator made an oral examination of them in natural light using a mirror and explorer to determine their DMFT index. Data were analyzed with t-test, one-way ANOVA, and Tukey test, pearson correlation coefficient using the SPSS WIN 15.0 program. Results: Regarding dietary self-efficacy, perceived benefit and perceived barrier degree, the subjects achieved a mean of $3.89{\pm}0.69$, $3.48{\pm}0.63$ and $3.82{\pm}0.63$ out of a maximum 5 points. And the dietary habit degree of subjects achieved a mean of $10.69{\pm}4.02$ out of a maximum 20 points and the DMFT index were $1.91{\pm}2.26$. Dietary habits was positively correlated with psychosocial factors and negatively correlated with DMFT index. And then perceived barrier score were negatively correlated with DMFT index. Conclusion: Based on the findings, dental caries experience is associated with perceived barrier and dietary habits. These results suggest that the implementation of health promotion should be considered for various psychosocial factors and dietary habits in adolescents.

• 천문학회보
• /
• 제42권1호
• /
• pp.39.4-40
• /
• 2017

According to the Korean government's Long-term Space Development Plan 2040, "Creative space science research" is included in a statement to investigate the origin and evolution of the universe by conducting a series of Korean space telescope missions: launch of space telescopes on a small satellite and an international collaboration explorer by 2020, a mid-size domestic space telescope by 2030, and a large size Korea leading international space telescope by 2040. We studied the feasibility of the future Korean Space Telescope (KST) for a mid-size domestic satellite platform. In order to pursue the uniqueness of the science program, we consider a wide range of observing wavelength (0.2um ~ 2.0um) with a spectral resolution of R~6 in the NUV and optical bands, and R~30 for NIR, utilizing an off-axis TMS(Three Mirror System) optics with a wide field of view ($2{\times}4$ degrees) which is optimized for ultra-low surface brightness sources. The main science goals of the mission include investigations of the galaxy formation, cosmic web, and the cosmic background radiation in the NUV-NIR regions. In this paper, we present the science cases and several technical challenges to be resolved along with the future milestones for the success of the KST mission.