• Nuclear Engineering and Technology
• /
• 제32권3호
• /
• pp.205-213
• /
• 2000

A series of laboratory experiments was conducted to investigate the fixation characteristics of poly(vinylalcohol)-poly(methacrylic acid)(PVA-PMAA) mixed solution on the soluble ${\gamma}$- radionuclides. Using the potentiometric titration technique, it was found out that the PVA and PMAA in a solution form intermacromolecular complex. The mobilized portion of each radionuclide by water from sand surface treated with a fixative was measured by ${\gamma}$-ray spectroscopy. The mobilized portion of minor radionuclides such as 241Am, 154Eu, 155Eu and 144Ce were higher than those of 134Cs and 137Cs. The capability of PVA-PMAA system was better among the candidate solutions for the fixation of total ${\gamma}$-radioactivity. 134,137Cs which is composed of more than 85 % of total ${\gamma}$-radioactivity could be fixed effectively by the PVA-PMAA solution.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2071-2081
• /
• 1995

In order to examine the effects of yield stress, tensile strength and thickness on the buckling behavior during bending of pipes, the nonlinear finite element analysis of the 3-point bending tests was carried out using the commercial software (ABAQUS) under the condition of L4(2$^{3}$) performed according to the designed condition. Form the analysis of simulation results, it was found that yield stress and thickness were the major factors on buckling load at pipe bending and tensile strength gave little influence because the plastic strain and plastic zone are small. For the punch displacement to the occurrence of buckling, thickness is a major factor and yield stress and tensile strength are the minor factors.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1190-1196
• /
• 2016

We propose a new bandpass filter (BPF)-based online channel normalization method to dynamically suppress channel distortion when the speech and channel noise components are unknown. In this method, an adaptive modulation frequency filter is used to perform channel normalization, whereas conventional modulation filtering methods apply the same filter form to each utterance. In this paper, we only normalize the two mel frequency cepstral coefficients (C0 and C1) with large dynamic ranges; the computational complexity is thus decreased, and channel normalization accuracy is improved. Additionally, to update the filter weights dynamically, we normalize the learning rates using the dimensional power of each frame. Our speech recognition experiments using the proposed BPF-based blind channel normalization method show that this approach effectively removes channel distortion and results in only a minor decline in accuracy when online channel normalization processing is used instead of batch processing

• 식품과학과 산업
• /
• 제45권4호
• /
• pp.21-28
• /
• 2012

Bread making is based on several simple unit operations, basically kneading, fermentation and baking; however, it is still a quite complex process and bread quality can be strongly affected by minor details. The market of bread production is roughly shared at 50-50 between the industry market and the artisanal market, even though the frontier between these two players is not very easy. Different strategies have been developped by the industry to extend the shelf life of bread or to interrupt the bread making process. Freezing for example has been used form the 50s to extend the shelf life of bakery products. It was first applied to fully baked products and then to frozen dough which appeared as an interesting strategy to interrupt the bread making protocol. This paper presents a review on key issues of the frozen dough technology.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권3호
• /
• pp.229-232
• /
• 2021

Cancer of the oral cavity and pharynx represents the 7th most diagnosed malignancy in Spain. Mucoepidermoid carcinomas are the most frequent malignancies of the minor salivary glands of oral cavities. The purpose of this report is to describe the very rare case of an alveolar ridge high-grade mucoepidermoid carcinoma presenting as an inside socket radiolucent lesion, simulating an apical cyst. The patient was diagnosed in our unit for oral and maxillofacial surgery and treated with surgery and adjuvant radiotherapy. The patient continues to be free of recurrent/persistent, local/regional disease after two years of follow up. Non-healed tooth related lesions present for more than one year are strongly recommended to be biopsied and evaluated histopathologically.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.655-658
• /
• 2006

Purpose: The main goals of correcting syndactyly of the hand are to form normal web appearance and to prevent motor dysfunction. We modified the original three-square-flap to improve interdigital web space and to reduce the wound healing problem due to tension. Methods: From July 2005 to February 2006, three cases of moderate to minor syndactyly were treated using modified three-square-flap. These flaps were made in such as way that the A flap from dorsal side, the B flap from the interdigital surface, and the C flap from the volar side. We modified the design of dorsal A flap as a hourglass shape instead of square shape to make normal hourglass shaped interdigital web and to reduce the tension of closure with other two flaps(B and C flap). The B and C flap were made as square shape. Results: During 4 to 10 months follow-up period, acceptable esthetic results were obtained without any specific complication, using our modification of the three-square-flap. Conclusion: Our method showed more satisfactory web appearance and was safe to use even in the cases of syndactyly secondary to burns and post-traumatic scars because of excellent blood circulation.

• 자원환경지질
• /
• 제16권2호
• /
• pp.111-123
• /
• 1983

The studied area is situated in tho southern part of the Ogcheon fold belt, where the "Ogcheon Group" is widespread with Jurassic and Cretaceous intrusions. The regional stratigraphy may be divided into three formations, the lower pebble bearing phyllitic, the middle dark grey phyllitic, and the upper black phyllitic formations. For the purposes of the present study, the area has been partitioned to three structural subareas based on major fold axes and fault line. The main subjects of the research have been discussed from two different points, multiple deformation and minor-micro fold styles. The former is analyzed by pebble elongation, folding and lineation in a pebbly formation as well as schistosity, crenulation cleavage and crenulated lineation in the phyllitic formation. The later describes the characteristic features of fold style in each formation and structural subarea. Although minor fold axes within broad pelitic rocks usually tend to trend northeast and to plunge northward, most of these were probably formed by two stages, first a similar fold phase and second a kink fold phase. Measured structural elements indicate that crenulation cleavage in phyllite formed parallel to fold axes of folded pebble followed a NE phase of first deformation and a fold axes of pebbles diagonal to bedding of phyllite are represented by a NW phase of a second deformation. Microscopically, quartz and mica grains form a micro fold enabling one to establish tectonic levels which occur in different deformation modes in each stratigraphic sequence. Microtextures such as crenulation cleavage, kink band, aggregate band of mica and pressure shadows of porphyroblast of quartz related to qarnet and staurolite may suggest the time relation of crystallization and tectonism. The result of this study may conform that three deformation phase, NE first phase-NE second phase-NW phase, occurred in the area.

• Archives of Plastic Surgery
• /
• 제35권2호
• /
• pp.197-200
• /
• 2008

Purpose: A congenital lacrimal sac fistula is unusual and consists of a dimple opening below the medial canthal tendon that leads to the lacrimal sac. This anlage ducts occur when the lacrimal anlage cells proliferate and canalize rather than involute. And, the anomaly is usually not associated with any systemic abnormalities. Also congenital cleft of the earlobes is rarely seen among congenital ear anomalies. Therefore, we report rare case with symptomatic bilateral lacrimal fistula with the ear cleft. Methods: A 4-year-old boy was admitted with aggravated chronic maxillary sinusitis, recurrent chronic dacryocystitis, and epiphora. He had two minor anomalies including bilateral lacrimal fistula originated in lacrimal tear sac and unilateral transverse ear cleft. The patient had been operated with fistulectomy and perioperative antibiotics. A small vertical ellipse is made around the opening with sharp dissection. The tract is excised using the probe as the guide. Another probe is placed through the lower canaliculus to prevent the damage. A suture ligature of 6-0 Maxon is placed around the deepest point of the tract, which is then excised. Additional sutures are placed in the tissues to form a tight closure to prevent reestablishment of the fistula. The skin is closed with 6-0 Black Silk. Results: The patient recovered well without any complications such as infection, epiphora, and obstruction of lacrimal sac. Conclusion: Our case illustrates bilateral lacrimal anlage ducts in a patient with unilateral congenital ear cleft. We recommend careful evaluation of lacrimal system in these patients, especially bilateral case and other congenital anomalies. Finally, we recommend excision of the ducts when epiphora, infection, or chronic skin irritation occur.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.615-619
• /
• 2012

Recently, ultrafine grained (ufg, typically 100 > d > 500 nm) Ti-Fe eutectic materials have been highlighted due to their extraordinarily high strength and good abrasion resistance compared to conventional coarse grained (cg, d > $1{\mu}m$) materials. However, these materials exhibit limited plastic strain and toughness during room temperature deformation due to highly localized shear strain. Several approaches have been extensively studied to overcome such drawbacks, such as the addition of minor elements (Sn, Nb, Co, etc.). In this paper, we have investigated the influence of the addition of Gd and Y contents (0.3-1.0 at.%) into the binary Ti-Fe eutectic alloy. Gd and Y are chosen due to their immiscibility with Ti. Microstructural investigation reveals that the Gd phase forms in the eutectic matrix and the Gd phase size increases with increasing Gd content. The improvement of the mechanical properties is possibly correlated to the precipitation hardening. On the other hand, in the case of Ti-Fe-Y alloys, with increasing Y contents, primary phases form and lamellar spacing increases compared to the case of the eutectic alloy. Investigation of the mechanical properties reveals that the plasticity of the Ti-Fe-Y alloys is gradually improved, without a reduction of strength. These results suggest that the enhancement of the mechanical properties is closely related to the formation of the primary phase.

• 미생물학회지
• /
• 제33권4호
• /
• pp.242-246
• /
• 1997

Synechococcus sp. cyanophage의 SDS-PAGE 수행 결과 구조단백질은 두 개의 major protein(97 kDa, 52 kDa)과 최소 일곱 개의 minor protein(70 kDa, 65 kDa, 60 kDa, 40 kDa, 35 kDa, 28 kDa, 6 kDa)으로 구성되어 있는 것으로 나타났다. Subunit들은 서로 disulfide bond로 연결되어 있지는 않지만 비공유적 결합으로 multimer를 형성하여 phage particle을 구성하고 있는 것으로 보인다. 또한 heat-killed Micrococcus luteus cell을 기질로 이용한 renaturing SDS-PAGE 방법으로 phage particle내의 세포벽 분해능을 살표본 결과 52 kDa 부근에서 세포벽 분해활성이 발견되었다. 이러한 세포벽 분해활성은 최적 pH가 9~10 사이이며 EDTA에 대한 낮은 저해를 나타내었다.