• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.311.2-311.2
• /
• 2013

Transmutation characteristics of minor actinides in a transmutation reactor based on a Low Aspect Ratio (LAR) tokamak are investigated. One-dimensional neutron transport and burn-up calculation coupled with the tokamak systems analysis were performed to find the optimal system parameters. The dependence of the transmutation characteristics such as neutron multiplication factor, produced power and transmutation rate on an aspect ratio A in the range of 1.5 to 2.0 was investigated. By adding Pu239 in the transmutation blanket as a neutron multiplication material, it was shown that the one unit of the transmutation reactor based on the LAR tokamak producing fusion power of 150 MWth can destroy the minor actinides contained in the spent fuels produced from more than 19 units of l GWe PWRs with production of the power being in the range of 0.9 - 3.4 GWth.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2274-2284
• /
• 2020

The Nuclear Fuel Cycle Code "ANICCA" has been developed by SCK•CEN to answer particular questions about the Belgian nuclear fleet. However, the wide range of capabilities of the code make it also useful for international or regional studies that include advanced technologies and strategies of cycle. This paper shows the main features of the code and the facilities that can be simulated. Additionally, a comparison between several codes and ANICCA has also been made to verify the performance of the code by means of a simulation proposed in the last NEA (OECD) Benchmark Study. Finally, a case study of the Belgian nuclear fuel cycle phase out has been carried out to show the possible impact of the transmutation of the minor actinides on the nuclear waste by the use of an Accelerator Driven System also known as ADS. Results show that ANICCA accomplishes its main purpose of simulating the scenarios giving similar outcomes to other codes. Regarding the case study, results show a reduction of more than 60% of minor actinides in the Belgian nuclear cycle when using an ADS, reducing significantly the radiotoxicity and decay heat of the high-level waste and facilitating its management.

• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.459-482
• /
• 2006

A geochemical approach to the long-term safety of waste disposal is discussed in connection with the significance of actinides, which shall deliver the major radioactivity inventory subsequent to the relatively short-term decay of fission products. Every power reactor generates transuranic (TRU) elements: plutonium and minor actinides (Np, Am, Cm), which consist chiefly of long-lived nuclides emitting alpha radiation. The amount of TRU actinides generated in a fuel life period is found to be relatively small (about 1 wt% or less in spent fuel) but their radioactivity persists many hundred thousands years. Geological confinement of waste containing TRU actinides demands, as a result, fundamental knowledge on the geochemical behavior of actinides in the repository environment for a long period of time. Appraisal of the scientific progress in this subject area is the main objective of the present paper. Following the introductory discussion on natural radioactivities, the nuclear fuel cycle is briefly brought up with reference to actinide generation and waste disposal. As the long-term disposal safety concerns inevitably with actinides, the significance of the aquatic actinide chemistry is summarized in two parts: the fundamental properties relevant to their aquatic behavior and the geochemical reactions in nanoscopic scale. The constrained space of writing allows discussion on some examples only, for which topics of the primary concern are selected, e.g. apparent solubility and colloid generation, colloid-facilitated migration, notable speciation of such processes, etc. Discussion is summed up to end with how to make a geochemical approach available for the long-term disposal safety of nuclear waste or for the performance assessment (PA) as known generally.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.118-123
• /
• 1998

The neurotics analysis of a liquid metal reactor fur burning minor actinides has shown that uncertainties in the nuclear data of several key minor actinide isotopes can introduce large uncertainties in the predicted performance of the core. A comprehensive sensitivity and uncertainty analysis was performed on a 1200 MWth actinide burner designed for a low burnup reactivity swing, negative doppler coefficient, and low sodium void worth. Sensitivities were generated using depletion perturbaton methods for the equilibrium cycle of the reactor and covariance data was taken ENDF-B/V and other published sources. The relative uncertainties in the burnup swing, doppler coefficient, and void worth were conservatively estimated to be 180%, 91%, and 46%, respectively.

• Nuclear Engineering and Technology
• /
• v.42 no.1
• /
• pp.79-88
• /
• 2010

Spent $UO_2$ nuclear fuel discharged from a nuclear power plant (NPP) contains fission products, U, Pu, and other actinides. Due to neutron capture by $^{238}U$ in the rim region and a temperature gradient between the center and the rim of a fuel pellet, a considerable increase in the concentration of fission products, Pu, and other actinides are expected in the pellet periphery of high burnup fuel. The characterization of the radial profiles of the various isotopic concentrations is our main concern. For an analysis, spent nuclear fuels originating from the Yeonggwang-2 pressurized water reactor (PWR) were chosen as the test specimens. In this work, the distributions of some actinide isotopes were measured from center to rim of the spent fuel specimens by a radiation shielded laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) system. Sampling was performed along the diameter of the specimen by reducing the sampling intervals from 500 ${\mu}m$ in the center to 100 ${\mu}m$ in the pellet periphery region. It was observed that the isotopic concentration ratios for minor actinides in the center of the specimen remain almost constant and increase near the pellet periphery due to the rim effect apart from the $^{236}U$ to $^{235}U$ ratio, which remains approximately constant. In addition, the distributions of local burnup were derived from the measured isotope ratios by applying the relationship between burnup and isotopic ratio for plutonium and minor actinides calculated by the ORIGEN2 code.

• Nuclear Engineering and Technology
• /
• v.39 no.6
• /
• pp.683-690
• /
• 2007

Because of increasing concerns regarding global warming and the longevity of oil and gas reserves, the importance of nuclear energy as a major source of sustainable energy is gaining recognition worldwide. To make nuclear energy truly sustainable, it is necessary to ensure not only the sustainability of the fuel supply but also the sustained availability of waste repositories, especially those for high-level radioactive waste (HLW). From this perspective, the effort to maximize the waste loading density in a given repository is important for easing repository capacity problems. In most cases, the loading of a repository is controlled by the decay heat of the emplaced waste. In this paper, a comparison of the decay heat characteristics of HLW is made among the various fuel cycle options. It is suggested that, for a future fast breeder reactor (FBR) cycle, the removal and burning of minor actinides (MA) would significantly reduce the heat load in waste and would allow for a reduction of repository size by half.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.767-772
• /
• 2012

In support of optimizing electrorefining technology for treating spent nuclear fuel, lithium drawdown has been investigated for separating actinides from molten salt electrolyte. Drawdown reaction selectivity is a major issue that requires investigation, since the goal is to remove actinides while leaving the fission products and other components in the salt. A series of lithium drawdown tests with surrogate fission product chlorides was run to obtain selectivity data with non-radioactive salts, develop a predictive model, and draw conclusions about the viability of using this process with actinide-loaded salt. Results of tests with CsCl, $LaCl_3$, $CeCl_3$, and $NdCl_3$ are reported here. Equilibrium was typically achieved in less than 10 hours of contact between lithium metal and molten salt under well-stirred conditions. Maintaining low oxygen and water impurity concentrations (<10 ppm) in the atmosphere was observed to be critical to minimize side reactions and maintain stable salt compositions. An equilibrium model has been formulated and fit to the experimental data. Good fits to the data were achieved. Based on analysis and results obtained to date, it is concluded that clean separation between minor actinides and lanthanides will be difficult to achieve using lithium drawdown.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.3
• /
• pp.373-382
• /
• 2020

This study proposes a method of separating uranium (U) and minor actinides from rare earth (RE) elements in the LiCl-KCl salt system. Several RE metals were used to reduce UCl₃ and MgCl₂ from the eutectic LiCl-KCl salt systems. Five experiments were performed on drawdown U and plutonium (Pu) surrogate elements from RECl₃-enriched LiCl-KCl salt systems at 773 K. Via the introduction of RE metals into the salt system, it was observed that the UCl₃ concentration can be lowered below 100 ppm. In addition, UCl₃ was reduced into a powdery form that easily settled at the bottom and was successfully collected by a salt distillation operation. When the RE metals come into contact with a metallic structure, a galvanic interaction occurs dominantly, seemingly accelerating the U recovery reaction. These results elucidate the development of an effective and simple process that selectively removes actinides from electrorefining salt, thus contributing to the minimization of the influx of actinides into the nuclear fuel waste stream.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.1-10
• /
• 2022

This study discusses the effect of using ²³²Th instead of ²³⁸U on the neutronic characteristics and the main operating parameters of the pressurized water reactor (PWR). MCNPX version 2.7 was used to compare the neutronic characteristics of UO₂ with (Th, ²³⁵U)O₂ and (Th, ²³³U) O₂. Firstly, the infinity multiplication factor (K_inf), thermal neutron flux, and power distribution have been studied for the investigated fuel types. Secondly, the effect of Gd₂O₃ and Er₂O₃ on the K_inf and on the radial thermal neutron flux and thermal power has been investigated to distinguish which of them is more suitable than the other in reactivity management. Thirdly, to illustrate the effectiveness of ²³²Th in decreasing the inventory of both the actinides and non-actinides, the concentration of plutonium (Pu) isotopes and minor actinides (MAs) has been simulated with the fuel burnup. Besides, due to their large thermal neutron absorption cross-section, the concentrations of ¹³⁵Xe, ¹⁴⁹Sm, and ¹⁵¹Sm with the fuel burnup have been investigated. Finally, the main safety parameters such as the reactivity worth of the control rods (ρ_CR), the effective delayed neutron fraction β_eff, and the Doppler reactivity coefficient (DRC) were calculated to determine to which extent these fuel types achieve the acceptable limits.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.386-395
• /
• 2004

The Korean fuel cycle scenario has been modeled by using the dynamic analysis method. For once-through fuel cycle model, the nuclear power plant construction plan was considered, and the nuclear demand growth rate from the year 2016 was assumed to be 1%. After setup the once-thorough fuel cycle model, the DUPIC and fast reactor scenarios were modeled to investigate the environmental effect of each fuel cycle. Through the calculation of the amount of spent fuel, and the amounts of plutonium and minor actinides were estimated and compared to those of the once-through fuel cycle. The results of the once-through fuel cycle shows that the demand grows to 64 GWe and the total amount of the spent fuel would be 100 kt in the year 2100, while the total spent fuel can be reduced by 50% when the DUPIC scenario is implemented